Résumé du contenu de la page N° 1
3-204-941-11(1)
Video Network
Station
GB
User’s Guide Page 2
FR
Mode d’emploi Page 47
SNT-V304
2000 Sony Corporation
preliminary
Résumé du contenu de la page N° 2
English WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical chock, do not open the cabinet. Refer servicing to qualified personnel only. VORSICHT Um Feuergefahr und die Gefahr eines elektrischen Schlages zu vermeiden, darf das Gerät weder Regen noch Feuchtigkeit ausgesetzt werden. Um einen elektrischen Schlag zu vermeiden, darf das Gehäuse nicht geöffnet werden. Überlassen Sie Wartungsarbeiten stets nur einem Fachmann. For the customers in t
Résumé du contenu de la page N° 3
English Table of Contents Video Network Station Features ...................................... 4 Part Names and Functions ............................................... 5 Front Panel ..............................................................................5 Rear Panel ...............................................................................6 System Application Examples ......................................... 7 Installation...........................................................
Résumé du contenu de la page N° 4
Video network station Features Video Network Station Features This unit is a video network station that distributes real-time CCTV images over a LAN or the Internet. Simple monitoring over a network Flexible, high-performance display functions • By assigning an IP address to this unit, live video can be monitored using standard Web browsers on client • Up to four inputs can be displayed in two- and four- PCs. way split screens, or by sequential switching. • The unit can be set up and controlled
Résumé du contenu de la page N° 5
Part Names and Functions Front Panel 67 S VIDEO VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 POWER STATUS 75Ω OFF 1 2 3 4 NETWORK 75Ω ON 1234 5 1 S VIDEO Input Terminal (4 pins) 5 VIDEO 1 to VIDEO 4 BNC Input Terminals Video sources that provide separate Y/C signals are Composite video signals can be connected here using input here. The VIDEO 1 input terminal is not usable coaxial video cable. The video signal format is when this terminal is used. automatically detected when an NTSC or PAL video source is co
Résumé du contenu de la page N° 6
Part Names and Functions Rear Panel 14 2 3 ~~ A3 C3 A4 C4 B A 12345678 AC IN ETHERNET (12V) COM 1 COM 2 10 /100 + – A1 C1 A2 C2 RELAY 67 1 AC IN (12 V) Input Terminal 4 ETHERNET 10/100 Terminal (RJ-45) The supplied AC adapter connects here. Using Category 5 twisted-pair cable, connect this terminal of the server to the network as a 10-Mbps 2 COM 1 Terminal (9-Pin D-Sub) Ethernet or 100-Mbps Fast Ethernet device. The EVI-D30/D31/G20/G21 or HSR-1/1P/2/2P can be connected to here. The EVI-D30/D31/G
Résumé du contenu de la page N° 7
System Application Examples • Up to four video sources can be connected to the server. • Highest image quality can be distributed by using S-video. Using the EVI-D30/D31 Connecting an EVI-D30/D31 to the video network station using the COM1 or COM2 terminal allows control of pan, tilt and zoom from a computer on the network. EVI-D30/D31 Ethernet 10/100 Terminal VISCA Cable COM1 Terminal S VIDEO S-VIDEO Input Terminal VISCA EVI-D30/D31 Cable NTSC/PAL VIDEO 2 Input Terminal LAN or Internet SNT-V304
Résumé du contenu de la page N° 8
Settings This chapter describes how to set up the video network The Wizard appears. station for various system types and applications. Video network station settings are made using Internet Explorer 5 (or later). Note If the computer used for making video network station settings or viewing the monitor screen is shared with other users, we recommend closing the Web browser when finished operations. Until the browser has been closed, even after moving to another Web page, the password-protected v
Résumé du contenu de la page N° 9
Installation Accessing the Administration Overview Page Click the (Admin) button to display the 3 Enter “root” as the system user name, and the “Administration overview” page. After basic settings password that was set previously, and click [OK]. have been made with the “First Time Installation The “Administration overview” page appears. Wizard”, all video network station settings and Note management are performed from the “Administration • The factory-default administrator (root) password over
Résumé du contenu de la page N° 10
Setting Description Monitor Screen and Alarm What format do Select the images and layout to be Function Setup you want ALL in displayed on the monitor in the ALL camera view to be mode from the following: in? The (Application Design) icon is used to configure • All cameras All video camera images are the monitor screen display and to determine the displayed. operation of the video network station when an alarm • Camera 1 and 2 horisontally aligned event occurs. Clicking the “Application Design”
Résumé du contenu de la page N° 11
Installation Dialog boxes relating to [Input 1] (Alarm Input 1) to Setting Description [Input 4] (Alarm Input 4) are displayed for the Camera Link Check this box to include in the e-mail following items. a link to the real-time image on the camera where an alarm event occurs. Upload Path: (FTP Enter the path of the save destination Setting Description only) for image files sent by ftp to a host. Alarm Enabled Alarm input is enabled when this box is Base File Name Enter the base file name for ima
Résumé du contenu de la page N° 12
Settable contents are shown in the following table. System Administration and Security Setting Description TCP/ BOOTP* Enable the BOOTP protocol to The (Network Station) icon is used to configure IP automatically download the IP the security of the video network station or system address. administrator. Clicking “Network Station” displays the Internet Enter the video network station IP Address address. following screen. Default Enter the network default router Router address. Subnet Enter the n
Résumé du contenu de la page N° 13
Installation Changing the System Administrator Password The setting items are shown in the following table. When finished setting, click the “Save” Icon. The Note accuracy of the internal clock is ±120 seconds/month When the video network station is shipped from the or less. factory, the system administrator’s user name and Setting Description password are set to “root” and “pass”. As all units are Date & Select the display format for date and programmed with the same settings at shipping time,
Résumé du contenu de la page N° 14
4 Repeat the above steps to add more users. Displaying the Log File Up to 20 users can be registered. Clicking the (View Log File) button opens a 5 Click the [Close] button to close the dialog box. new window to display the “Log file Events” page. Recently executed commands are displayed on the “Log file Events” page. The log file is used to check Unregistering a User whether a special event was executed, such as whether a command was issued before or after an alarm 1 Select the name of the use
Résumé du contenu de la page N° 15
Installation Setting Options Description Serial Port Settings Purpose Modem Select this if a modem is (only connected to the port. The (COM1 and COM2) icons represent the displayed for When selected, the “Modem” COM2) and “ISP” icons shown below serial ports of the video network station. Use these are displayed. icons when an EVI-D30/D31/G20/G21 or HSR-1/1P/ 2/2P is connected to the “COM1” or “COM2” ports to set up serial port function and communications None Select this if no device is para
Résumé du contenu de la page N° 16
Pan/Tilt Driver and Video Camera ID Setup The (Pan Tilt) icon is displayed when a Pan/Tilt device is selected for the serial port usage. If the “Pan Tilt” icon is not displayed next to the icon of the applicable serial port, refer to “Serial Port Settings” on page 18 to reset the serial port usage. Up to seven VISCA-compliant video cameras can be connected by daisy chaining to the two serial ports on the video network station, with pan/tilt/zoom controlled by the ID number of each video camera.
Résumé du contenu de la page N° 17
Installation Setting Pan/Tilt Camera Preset Position HSR-1/1P/2/2P Setup The (Preset Positions) icon is used to set preset The (HSR) icon is displayed when HSR-1/1P/2/ positions for a pan/tilt camera. 2P is selected for the serial port usage. When an HSR- The administrator can set and name up to 20 preset 1/1P/2/2P is connected to the video network station’s positions for a video camera. Users can then position COM1 terminal, if the “HSR” icon does not appear the video camera quickly and accur
Résumé du contenu de la page N° 18
• Available settings differ according to the type of • Time Display Format HSR connected. The following four display formats are available on Some settings are different for the HSR-1/1P and the HSR-1/1P/2/2P “INDICATION CONTROL” HSR-2/2P, which are automatically detected by the page, which are independent of the video network video network station. server’s “Date & Time” (see page 15). – “SETUP MENU” - “TIME ADJUSTMENT” • Recording Mode Setting Procedure – “SETUP MENU” - “RECORDING FUNCTION” To
Résumé du contenu de la page N° 19
Installation Modem Setup ISP (Internet Service Provider) Setup The (Modem) icon is displayed when [Modem] is The (ISP) icon is displayed when [Modem] is selected for the serial port usage. When a modem is selected for the serial port usage. The “ISP” icon is connected to the video network station, if the used to set up connection with an “ISP” (Internet “Modem” icon does not appear next the “COM2” icon, Service Provider). If the “ISP” icon is not displayed, refer to “Serial Port Settings” on p
Résumé du contenu de la page N° 20
3 Click the “Save” icon. Video Input Setup The settings are saved. The (Video) icons indicate the video sources connected to the VIDEO 1 to VIDEO 4 input Video Image Settings terminals. If the serial port usage is set for an HSR-1/ 1P/2/2P, the (HSR) icon is displayed at the [1] Click the (Image settings) icon to display the and [2] video input terminals. “Image Settings for Video 1” dialog box. An “×” appears to the left of an icon if no video signal is present at the corresponding input ter
