Instruction d'utilisation Hamilton Beach tempest series

Résumé du contenu de la page N° 1

Tempest
Series Blenders
Operation Manual
Mélangeurs de series
Tempest
Manuel d’utilisation
Licuadoras de series
Tempest
Manual de uso
840065601 Technical Service: 1-866-285-1087 (www.commercial.hamiltonbeach.com)

Résumé du contenu de la page N° 2

Blender Safety IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your operator training program. Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the

Résumé du contenu de la page N° 3

Blender Safety IMPORTANT SAFETY INSTRUCTIONS WARNING – When using electrical appliances, basic safety precautions should be followed, including the following: • To prevent damage to blender, jar, or cutter • Read all instructions. assembly, DO NOT move or shake blender • Plug into a grounded outlet. while in operation. If blending action stops during • Do not touch surfaces that may be hot. operation, turn blender OFF, remove jar from Use handles or knobs provided. base, remove jar cover, and

Résumé du contenu de la page N° 4

Caring for the Blender Cleaning the Blender wWARNING wWARNING Cut Hazard Electrical Shock Hazard Always place cover on jar when blending. Plug into a grounded outlet. Do not put hands, spoons, or other utensils Do not remove ground. in jar when blending. Do not use an adapter. Failure to follow these instructions can Do not use an extension cord. result in broken bones or cuts. Failure to follow these instructions can result in death, fire, or electrical shock. Sanitizing If the blender will not

Résumé du contenu de la page N° 5

Caring for the Blender Troubleshooting Guide Problem . . . Solution . . . Operation/Status light A system fault has been detected. Unplug unit for 5 seconds, and then plug unit lights red back in. If light is still red, unplug unit for 6 minutes, and then plug unit back in. (on some models) If light is still red, refer to "Requesting Assistance or Service.” If Operation/Status light repeatedly lights red, refer to “Requesting Assistance or Service.” Unit will not run • Check to see if unit is

Résumé du contenu de la page N° 6

Product Warranty This Warranty supercedes all other Product Warranties This product is warranted to be free from defects in material and workmanship for a period of three (3) years parts/ two (2) years labor OR 15,000 cycles (whichever comes first) from the date of original pur- chase, except as noted below. There is a lifetime warranty on the motor drive coupling and blade. During this period, we will repair or replace this product, at our option, at no cost to you. THE FOREGOING WARRANTY IS IN