Instruction d'utilisation Wolverine 8000

Résumé du contenu de la page N° 1

FlashPro




Memory Card Reader/Writer – MP3 Player/Recorder- FM Tuner


Mass Storage Device





8000 Series

















User Manual




Version 1.0

Revision Date: September 23, 2005
28

How to update the firmware for my FlashPro 8000
CAUTION
• VISIT WOLVERINEDATA ON THE WEB
Go to http://www.Wolverinedata.com/ to download the latest firmware Under no circumstances should you try to repair the sy

Résumé du contenu de la page N° 2

Step 2: To avoid bending the pins, carefully slide the battery into the chassis. FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. ©These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor

Résumé du contenu de la page N° 3

Index 2.Troubleshooting. WARNING 1. Specifications ………………………………………..…6 Under no circumstances should you try to repair the system yourself, as this will Invalidate the warranty. Do not open the system as there is a risk of electronic shock. 2. Overview of Panels & keys…………………………... 7 If a fault occurs, first check the points listed below before taking the system for repair. 3. Using the FlashPro 8000 ………………………………9 If you are unable to remedy a problem by following t

Résumé du contenu de la page N° 4

! Partition the HDD ( refer to 3-4 Format Hard Disk under Win 2K/ Win XP) 1. Specifications: ! Don’t formatted the 32G above Hard Disk under Windows 2000 or - MP3 (MPEG1 Audio Layer I/II/III & 2.5), Windows XP Bit rate : 32kbps ~ 320 kbps CBR. File Type Note: Win 2K/ Win XP can not support Format Disk for 30G above Hard Drive. - WMA, Bit rate: 32Kbps ~ 320Kbps, CBR - Audio CD Audio Equalizer Jazz / POP /Normal /Classic /Rock /user-definable Signal-to-

Résumé du contenu de la page N° 5

FlashPro 8000 FlashPro 8000 2. Press [ MENU ] button to open function menu . 3. Using the FlashPro 8000 3. Scroll to [REC INPUT ] 3-1 Starting up 4. Use [! ] or [ " ] button to set REC INPUT at [ MIC IN ] _________________________________________________________________ 1) Charge the batteries ! Before using for the first time, charge the batteries for a full four hours. 2) Power On /Off ! Press the power button. The green light will go on and the operating

Résumé du contenu de la page N° 6

FlashPro 8000 FlashPro 8000 8. Recording: Macintosh MacOS 9.x - You can press the “Record” button anytime to start recording. However, you are not able to record voice streams and listen to music at the same 1 Insert your driver Installation into your CD-ROM drive and double click on "My time. You are able to listen to FM radio and record radio show at the computer" Browse your CD-ROM drive to "MacOS Installer". same time but unable to recor

Résumé du contenu de la page N° 7

Using the equalizer 2. Scroll to [ FILE ] and press [ OK ] button. 1. Switch on your FlashPro 8000. 2. Use the [ ! ] or [ " ] buttons to high-light a folder or a file you want to copy. 2. Press [ MENU ] button to open function menu . 3. Press [Copy] button to open file manager. 3. Scroll to 4. Scroll to and press [OK ] button, copy function will be performed. 4. Use the [! ] or [" ] buttons to select EQ mode , the Equalizer setting included: JAZZ, ROCK, NOR

Résumé du contenu de la page N° 8

! If the “ OK” message display on the screen , it indicates the file is successfully copied ! If the “ OK” message display on the screen , it indicates the file is successfully deleted. The icon ☺ will display on the main page after switching your FlashPro 8000. The icon ☺ will display on the main page after switching your FlashPro 8000 ! If the “ NG” message display on the screen , it indicates the copy function is failed. ! If the “ NG” message display on the screen , it in