Résumé du contenu de la page N° 1
802.11g Wireless PCI Adapter
Model # AWLH3026T
User’s Manual
Ver. 1A
Résumé du contenu de la page N° 2
Table of Contents 1. Introduction .................................................................................................................3 1.1 Package Contents ................................................................................................. 3 2. Installation ................................................................................................................... 4 2.1 Install Driver & Utility..............................................................
Résumé du contenu de la page N° 3
1. Introduction Thank you for purchasing the 802.11g Wireless PCI Adapter. The Wireless PCI Adapter is an advanced IEEE 802.11b/g compatible, high-performance wireless card that supports data transfer speeds of up to 54 Mbps. The adapter can be integrated into a network in either Ad-Hoc mode (without an Access Point) or Infrastructure mode (with an Access Point). This Adapter supports 64/128-bit WEP data encryption that protects your wireless network from eavesdropping. It also suppor
Résumé du contenu de la page N° 4
2. Installation 2.1 Install Driver & Utility This section provides instructions on how to install the Airlink101 802.11g Wireless PCI Adapter. The driver is installed along with the utility. Note: Be sure to power off your computer before inserting the PCI adapter. For Windows 98SE and ME users, you may be prompted to insert the Windows 98SE or ME CD during the driver installation. Be sure to have your Windows 98SE or ME CD ready. Step 1 Insert the PCI adapter into an available PC
Résumé du contenu de la page N° 5
Step 3 The Autorun screen will appear. Select Install Utility and Driver from the menu. Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and type D:\utility\setup.exe (where D is the letter of your CD drive) and click OK. Step 4 Click Next at the welcome screen. 5
Résumé du contenu de la page N° 6
Step 5 Click Next to accept the default destination folder. Step 6 Click Next to accept the default program folder. 6
Résumé du contenu de la page N° 7
Step 6 Click Continue Anyway at the Windows Logo Screen. (For Windows 2000, click Yes at the Digital Signature Not Found prompt). Step 7 Verify Yes, I want to restart my computer now is selected and click Finish to restart your computer. 7
Résumé du contenu de la page N° 8
2.2 Verify Driver Installation To verify if the driver has been installed successfully, please perform the following steps. Step 1 Right-click on My Computer from your desktop and select Properties. Step 2 Select the Device Manager tab. (For Windows 2000/XP, select the Hardware tab first and then click on Device Manager). 8
Résumé du contenu de la page N° 9
Step 3 Expand Network adapters from the list and verify that Airlink101 802.11g PCI Adapter is listed and no yellow question mark is beside it. If Airlink101 802.11g PCI Adapter is not listed, or you see a yellow question mark beside it, please re-install the driver again. 9
Résumé du contenu de la page N° 10
3. Configure the Wireless PCI Adapter This section describes how to connect your Airlink101 802.11g Wireless PCI Adapter to a wireless network. Note to Windows XP Users: You must disable the Wireless Zero Configuration Utility in order to use the WLAN Monitor. Please refer to the following steps to disable the Wireless Zero Configuration Utility. Step 1 Double-click on the Wireless Network Connection Icon in the system tray and then click on Change advanced settings under Related
Résumé du contenu de la page N° 11
To open the Wireless PCI Adapter’s utility go to Start > (All) Programs > Airlink101 > WLAN Monitor. Note: The utility automatically adds an available wireless network to the Preferred WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the following steps to join the appropriate wireless network. Be sure to remove the wrong SSID from the Preferred WLANs box before adding any new SSID. You can remove the wrong SSID by selecting it and clicking on Remove. Step
Résumé du contenu de la page N° 12
Step 2 If you are connecting to an unsecured wireless network, a caution message will appear. Click OK to exit the message. Step 3 Verify the SSID you have selected is in the Preferred WLANs box and click Apply. Step 4 A blue circle appears indicating a connection is established. Click OK. Note: In some cases, you may need to restart your computer to complete the wireless connection. 12
Résumé du contenu de la page N° 13
4. Configure the WLAN Monitor This section describes the various functions of the WLAN Monitor that you can configure, including the settings of wireless encryption. 4.1 Configuration Tab The Configuration Tab displays all available Access Points detected. Available WLANs: Displays all available Access Points detected. To update the list, click on Refresh. To connect to a SSID in the list, click on Connect. Preferred WLANs: You may add a preferred SSID that the wireless adap
Résumé du contenu de la page N° 14
listed beginning from the top of the list. If you wish to configure the properties of a WLAN, highlight it and click on Properties. Profile Group Control: Once you have added all the SSIDs you want to the Preferred WLANs box, you can group them by giving them a name in the Profile Group Control box and click New. Any configuration you set to the group will automatically be applied to all the WLANs in that group. Be sure to click Apply to save your settings. 4.1.1 Configuring WEP Enc
Résumé du contenu de la page N° 15
Step 2 Select WEP from the Data Encryption drop-down list. Step 3 Select the appropriate Key length and Default key and enter the password in the Network Key field and click OK. The Key length, Default Key, and password must all be the same as the wireless network you are connecting to. Step 4 Click Apply and then OK at the Configuration Tab. 15
Résumé du contenu de la page N° 16
4.1.2 Configuring WPA-PSK Encryption Step 1 Select the SSID you wish to configure the encryption for from the Preferred WLANs box and then click Properties. Step 2 Select WPA-PSK from the Authentication Mode drop-down list and then click on the Authentication Config button. 16
Résumé du contenu de la page N° 17
Step 3 Enter the password in the WPA Passphrase field. The password must be the same as the wireless network you are connecting to. Step 4 Click OK and then OK again. Step 5 Click Apply and then OK at the Configuration Tab. 17
Résumé du contenu de la page N° 18
4.2 Status Tab The Status Tab displays information about the Connection State, Hardware Information, and Advance State. Connection Status: Displays the status of the connection SSID: The SSID that the wireless adapter is connected to BSSID: The MAC Address of the Access Point that the wireless adapter is connected to Network Type: The network connection type Frequency: The frequency that the wireless adapter is using Channel: The channel number that the wireless adapter is using
Résumé du contenu de la page N° 19
4.3 Option Tab The Option Tab allows you to configure the wireless adapter’s General and Advanced Settings as well as its Connection Type. General Setting Auto launch when Windows starts up: Check the box to launch the WLAN Monitor when Windows starts up Remember mini status position: Remembers the mini status screen position Auto hide mini status: Auto hides the mini status screen Set mini status always on top: The mini status screen will always stay on top of the desktop En
Résumé du contenu de la page N° 20
Advance Setting Disable Radio: Check the box to disable the radio signal Fragmentation Threshold: Set the desired fragmentation threshold RTS Threshold: Set the desired RTS threshold Frequency: 802.11b/g switches automatically between 802.11b and 802.11g speed depending on the other wireless device. 802.11b will only connect at 802.11b speed (11 Mbps or lower). Start ad hoc network: Choose the appropriate frequency for your ad-hoc network Ad-Hoc Channel: Choose the desired channel for
