Résumé du contenu de la page N° 19
6 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 4.0 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Click on “Yes” when prompted to install Windows NT Networking. 11 Select “Wired to the network” and click on “Next”. 12 Click on the “Select from list…” button and then
Résumé du contenu de la page N° 20
6 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 4.0 Server 26 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on “Next”. 27 Click on “Finish” to complete the installation. 28 Remove the 3Com driver disk from the floppy drive and select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 29 Log onto Windows NT4 Wo
Résumé du contenu de la page N° 1
3COM Etherlink III 3C509B ISA
10BT Network Adapter
Installation Guide
Résumé du contenu de la page N° 2
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility
Résumé du contenu de la page N° 3
General information to read before installing General information to read before installing • On all systems : Before installing LAN card, go into Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards. ISA cards: • For ISA network adapters, start the configuration tool provided in driver kit (See install documentation) • Under CMOS setup, go to A
Résumé du contenu de la page N° 4
General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS.
Résumé du contenu de la page N° 5
1 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 1 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows 95 SR2.5. • 3COM EtherLink III 3C509B-TP ISA 10BT network adapter and driver disk version 6.0. • Driver File: ELNK3ND3.SYS, version 5.26.31 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 3.51 Server system that suppor
Résumé du contenu de la page N° 6
1 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 3.51 Server 9 Remove the 3COM 3C509B driver disk and reboot the system to Windows 95SR2.5. 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, “3Com EtherLink III ISA
Résumé du contenu de la page N° 7
2 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 2 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows 95 SR2.5. • 3COM EtherLink III 3C509B-TP ISA 10BT network adapter and drivers disk version 6.0. • Driver File: ELNK3ND3.SYS, version 5.26.31 • Microsoft Windows 95 SR2.5 media. • Microsoft Windows NT 4.0 Server system that support
Résumé du contenu de la page N° 8
2 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 4.0 Server 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, “3Com EtherLink III ISA (3C509b-TP) in PnP mode”, click on “Finish”. 13 During the Update Device Driver p
Résumé du contenu de la page N° 9
3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a NetWare Requirements 3.12 Server • HP Vectra with Windows 95 SR2.5. • 3COM EtherLink III 3C509B-TP ISA 10BT network adapter and drivers disk version 6.0. • Driver File: ELNK3ND3.SYS, version 5.26.31 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 3.12 Server that supports IPX network
Résumé du contenu de la page N° 10
3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 3.12 Server 9 Remove the 3COM 3C509B driver disk and reboot the system to Windows 95SR2.5. 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, “3Com EtherLink III ISA (3C
Résumé du contenu de la page N° 11
3 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 3.12 Server 26 Novell NetWare Client Novell NetWare Client 3COM Etherlink III Bus-Master PCI Ethernet Adapter IPX 32-bit Protocol for the Novell NetWare Client IPX/SPX-compatible Protocol NetBEUI 27 When prompted, specify the path to your Windows 95 files. 28 Click on “Yes” when prompted to restart the system.
Résumé du contenu de la page N° 12
4 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 4 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows 95 SR2.5 Connecting to a NetWare Requirements 4.11 Server • HP Vectra with Windows 95 SR2.5. • 3COM EtherLink III 3C509B-TP ISA 10BT network adapter and drivers disk version 6.0. • Driver File: ELNK3ND3.SYS, version 5.26.31 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 Server that supports IPX network
Résumé du contenu de la page N° 13
4 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 4.11 Server 9 Remove the 3COM 3C509B driver disk and reboot the system to Windows 95SR2.5. 10 Windows 95SR2.5 will automatically recognize the 3COM 3C509B network adapter as “3Com 3C509B EtherLink III”. 11 Insert the 3COM 3C509B driver disk in the floppy drive and click on “Next” from the Update Device Driver Wizard dialog box. 12 When Windows 95 detects the updated driver, “3Com EtherLink III ISA (3C
Résumé du contenu de la page N° 14
4 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a NetWare 4.11 Server 26 Novell NetWare Client Novell NetWare Client 3COM Etherlink III Bus-Master PCI Ethernet Adapter IPX 32-bit Protocol for the Novell NetWare Client IPX/SPX-compatible Protocol NetBEUI 27 When prompted, specify the path to your Windows 95 files. 28 Click on “Yes” when prompted to restart the system.
Résumé du contenu de la page N° 15
5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 4.0 Workstation 5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM EtherLink III 3C509B-TP ISA 10BT network adapter and driver disk version 6.0. • Driver File: ELNK3ND4.SYS, version 5.26.40 • Microsoft Windows NT 4.0 Workstation media. • Microsoft W
Résumé du contenu de la page N° 16
5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 3.51 Server 8 Log onto Windows NT4 Workstation with administrator privileges (Contact your network administrator if you do not have the required information). 9 Right-click on the “Network Neighborhood” icon and select “Properties”. 10 Click on “Yes” when prompted to install Windows NT Networking. 11 Select “Wired to the network” and click on “Next”. 12 Click on the “Select from list…” button and the
Résumé du contenu de la page N° 17
5 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Connecting to a Windows NT 3.51 Server 26 Specify your Computer Name, Workgroup or Domain (Contact your network administrator if you do not have the required information) and click on “Next”. 27 Click on “Finish” to complete the installation. 28 Remove the 3Com driver disk from the floppy drive and select “Yes” at the prompt to shut down and restart your computer for the new settings to take effect. 29 Log onto Windows NT4 W
Résumé du contenu de la page N° 18
6 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 4.0 Workstation 6 Installing the 3COM EtherLink III 3C509B ISA 10BT Network Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 4.0 Server • HP Vectra with Windows NT 4.0 Workstation. • 3COM EtherLink III 3C509B-TP ISA 10BT network adapter and driver disk version 6.0. • Driver File: ELNK3ND4.SYS, version 5.26.40 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Wi
