Instruction d'utilisation KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V

Instruction d'utilisation pour le dispositif KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V

Dispositif: KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V
Catégorie: Carte réseau
Fabricant: KTI Networks
Dimension: 1.26 MB
Date d'addition: 12/2/2013
Nombre des pages: 34
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V.

Pour votre confort

Si regarder l'instruction KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 34 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-117FM-V. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

Installation Guide
Web Smart Managed
10/100 Fast Ethernet Switches
with VLAN Support
KS-115FM-V
KS-117FM-V
DOC.030430-KS115FM-V-KS117FM-V-K
-1-

Résumé du contenu de la page N° 2

(C) 2002 KTI Networks Inc. All rights reserved. No part of this documen- tation may be reproduced in any form or by any means or used to make any directive work (such as translation or transformation) without per- mission from KTI Networks Inc. KTI Networks Inc. reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of KTI Networks Inc. to provide notification of such revision or change. For more information, contact: Unite

Résumé du contenu de la page N° 3

The information contained in this document is subject to change without prior notice. Copyright (C) All Rights Reserved. TRADEMARKS Ethernet is a registered trademark of Xerox Corp. This device complies with Class A Part 15 the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received including the interference that may cause. CISPR A COMPLIANCE: This device complies with EMC dire

Résumé du contenu de la page N° 4

Table of Contents 1. Introduction ..................................................................5 1.1 Features ........................................................................................... 6 1.2 Specifications .................................................................................. 7 1.3 FX Port Optical Specifications ......................................................... 8 1.4 Management Specifications ............................................................ 9

Résumé du contenu de la page N° 5

1. Introduction This guide describes the specifications and installation instructions for the following two managed 10/100 switch series: KS-115FM-V series • Four 10/100BASE-TX auto-negotiation TP switched ports  One 100BASE-FX Fiber switch port  Web-based device management support  Compact Fast Ethernet switch KS-117FM-V series  Six 10/100BASE-TX auto-negotiation TP switched ports  One 100BASE-FX Fiber switch port  Web-based device management support  Compact Fast Ethernet switch -5-

Résumé du contenu de la page N° 6

1.1 Features  The 10/100BASE-TX switched ports support: - Auto speed sensing for 100Mbps or 10Mbps connection - Auto configuration for connected auto-negotiation devices - Full-duplex or half-duplex operation - Port configuration can be changed via web management interface  The 100BASE-FX switched port supports: - 100Mbps full duplex connection - Variety of fiber connectors such as ST, SC, MT-RJ, LC and VF-45 - Multimode and single mode fiber cables (model dependent)  Provide the following sw

Résumé du contenu de la page N° 7

1.2 Specifications Figure : Major Components on Panels (Ex. KS-117FM-V) KS-115FM P1-P4 Port 1 ~ Port 4 Twisted-pair switched ports (TP ports) KS-117FM P1-P6 Port 1 ~ Port 6 Twisted-pair switched ports (TP ports) TP Port IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX std. Shielded RJ-45 jacks with Auto MDI-X detection Auto-negotiation capable Speed for 10Mbps or 100Mbps Full-duplex or half-duplex support FX Port IEEE 802.3u 100BASE-FX compliant Fixed 100Mbps Full-duplex operation Flow control IEEE 8

Résumé du contenu de la page N° 8

Filtering address Multicast/Broadcast/Unicast address MAC address 2K entries Aging time 300 seconds Priority levels 2 outgoing priority queues (Ratio: High/Low = 4/1 ) VLAN mode 1. Port-based VLAN 2. 802.1Q VLAN (Tag-based) VLAN groups 16 groups (Group 0 ~ 15) Port PVID Full 12-bit VID, per port setting Port Tag Mode Tag/Untag mode, per port setting o o Environment Temperature 0 C to 40 C Relative humidity 10% to 90% non-condensing Dimensions 144 mm x 100 mm x 26 mm (WxDxH) 5.67 x 3.94 x 1.02 in

Résumé du contenu de la page N° 9

1.4 Management Specifications Interface In-band web browser for IE4.0 and Netscape4.x Ping command, ARP command Protocols IPv4, ARP, ICMP, UDP, TCP, DHCP client, Http server IP Setting DHCP dynamic IP mode (default mode) Static IP mode (default : 192.168.0.2) DHCP DHCP client ID = Device modelname + MAC address Security Login password checking Password setting (default : 123) Port All ports : port status monitoring Monitoring Link, Speed, Duplex, Flow control status Port Per TP port configuratio

Résumé du contenu de la page N° 10

2. Installing the Switches 2.1 Unpacking Check to see that you have everything before you start the installation.  Installation guide  The switch unit  Rubber magnet stand  One AC power adapter for the unit 2.2 Supply the Power Checking AC Power Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your area. The specifications of the AC p

Résumé du contenu de la page N° 11

2. Connect the power adapter cable to the switch before connecting the adapter to the AC outlet. 2.3 Port Configuration The switches provide port configuration function through the manage- ment interface. The setting options are shown as follows: Port Type TP PORTS FX PORT Auto-negotiation Enable/Disable Not allowed Speed options 100M / 10M Not allowed (fixed 100M) Duplex options Full / Half Not allowed (fixed Full) When auto-negotiation is enabled, the speed and duplex settings be- come the por

Résumé du contenu de la page N° 12

2.4 VLAN Function The switches support two VLAN modes. One is Port-based VLAN and the other is 802.1Q VLAN. The following configuration are supported: 1. VLAN Mode : Port-based mode or 802.1Q mode 2. VLAN mapping table setup : member ports setup for each group 3. Per port PVID setup : PVID setting, Tag mode setting Port-based VLAN Mode 1. This mode supports 16 VLAN groups, Group 0 ~ Group 15. 2. Packet forwarding is performed only among the member ports in same group. 3. Every packet, tagged or

Résumé du contenu de la page N° 13

802.1Q VLAN Mode 1. This mode supports 16 VLAN groups, Group 0 ~ Group 15. 2. When an untagged packet is received, the associated PVID setting of the input port is used to map to one VLAN group in VLAN group table. The mapping index is retrieved from the least 4 bits (bit 3~0) of the PVID value. 3. When a tagged packet is received, the VLAN ID value of the received packet is used to map to one VLAN group in VLAN group table. The mapping index is retrieved from the least 4 bits (bit 3~0) of the V

Résumé du contenu de la page N° 14

Summary of VLAN Group Lookup (Group Mapping Index) Input Packet Type Port-based VLAN Mode 802.1Q VLAN Mode Untagged packet PVID bit3-0 of input port PVID bit3-0 of input port Tagged packet PVID bit3-0 of input port VID bit3-0 of the packet Factory Default Settings VLAN Mode Port-based mode VLAN Group 0 MNG port only (No user port) VLAN Group 1 All user ports and MNG port VLAN Group 2~15 No user port (MNG port only) PVID 1 for all ports and MNG port Tag Mode Untagged for all ports and MNG port -1

Résumé du contenu de la page N° 15

2.5 DHCP and IP Configuration Each switch must be designated an IP address before it can be managed from web browser. Basically, the switches provide two methods for IP configuration: 1. DHCP mode The switch requests a dynamic IP address from the first discovered DHCP server in the network when boot up. In general, the assigned IP can be monitored in the client list on the DHCP server. The model name and MAC address of the switch is referred as the DHCP client ID. If no DHCP server is discovered

Résumé du contenu de la page N° 16

2.7 Making UTP Connections TP Port Configuration Use management function to set the required TP port configuration. It is recommended to set the highest ability for the TP ports as follows: Auto-negotiation = enabled Speed = 100M Duplex = Full This is appropriate to support connection to almost every Ethernet de- vices including those which are not auto-negotiation capable. Cables Depending on the connection speed, use the appropriate UTP cables for the connections as follows: Speed Cables used

Résumé du contenu de la page N° 17

2.8 Making Fiber Connection For different fiber connections, several alternative models can be selected for different fiber connections as follows: * Model Ext. Connector Cable Max. Distance -T ST MM 2 Km -C SC MM 2 K m -JM MT-RJ MM 2 Km -VM VF-45 MM 2 Km -L L C MM 2 K m -SA2 SC SM 20 Km *: The maximum distance connecting to a full duplex device The recommended multimode fiber is 62.5/125mm and 9/125mm for single mode fiber. The following figure illustrates a connection example be- tween two SC

Résumé du contenu de la page N° 18

2.9 LED Indications Functions POWER : indicates the status of the power supplied to the switch. 100/10 : indicates the connection speed between the TP port and the associated connected device. LINK/Act. : indicates the port link and activity status FDX/Col. : indicates the duplex mode and collision occurrences The following table lists the LED states and the indications: LED State Indication POWER OFF No power is supplied to the device. POWER ON Power is supplied to the device. 100/10 OFF 10Mbps

Résumé du contenu de la page N° 19

3. Web Management 3.1 Web Browser The system features an http server which can serve the management requests coming from any web browser software over internet or intranet network. Web Browser Compatible web browser software with JAVA support Microsoft Internet Explorer 4.0 or later Netscape Communicator 4.x or later Start connection Before the switch can be managed from a web browser software, the switch IP address is required. Consult your LAN administrator if it is not available. Start your b

Résumé du contenu de la page N° 20

Enter your password and click [OK] to login into the switch. The switch comes with factory default password : 123. -20-


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 KTI Networks DH-8T Manuel d'utilisation Carte réseau 0
2 KTI Networks KF 221TX/3 Manuel d'utilisation Carte réseau 0
3 KTI Networks KF223TX Manuel d'utilisation Carte réseau 0
4 KTI Networks Gigabit Ethernet PCI Adapter KG-502T Manuel d'utilisation Carte réseau 0
5 KTI Networks KCD-302 Series Manuel d'utilisation Carte réseau 0
6 KTI Networks KG-500F Manuel d'utilisation Carte réseau 0
7 KTI Networks KF-310 Manuel d'utilisation Carte réseau 1
8 KTI Networks KCD-400 Series Manuel d'utilisation Carte réseau 4
9 KTI Networks KF230TX Manuel d'utilisation Carte réseau 0
10 KTI Networks Web Smart Managed 10/100 Fast Ethernet Switches with VLan Support KS-115FM-V Manuel d'utilisation Carte réseau 0
11 KTI Networks KF-310L Manuel d'utilisation Carte réseau 0
12 KTI Networks 100Base-FX Fast Ethernet PCI Adapter KF-221FX Ver.C Manuel d'utilisation Carte réseau 0
13 Sony BTA-NW1A Manuel d'utilisation Carte réseau 2
14 Sony BKMW-E3000 Manuel d'utilisation Carte réseau 2
15 Sony AC-SQ950D Manuel d'utilisation Carte réseau 0
16 Sony BBV RX100 Manuel d'utilisation Carte réseau 3
17 Sony CLIE A-AVZ-100-11 Manuel d'utilisation Carte réseau 1