Résumé du contenu de la page N° 1
SATELLITE COMPASS
SC-120
Résumé du contenu de la page N° 2
Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi Nishinomiy ya, Ja a, Jap pan an Tele Telep phone : hone : 0798-65-2111 0798-65-2111 fa fax x 0798-65-4200 0798-65-4200 :: F FIRST EDITION : IRST EDITION : MAR. MAR. 2001 2001 A All ri ll rig ghts reserved. hts reserved. Printed in Japan Printed in Japan P1 P1 :: FEB. FEB. 26,2004 26,2004 PUB.No. PUB.No. OME-72490 OME-72490 *00080919206* *00080919206* *00080919206* *00080919206* ( ( KAMI KAMI ) ) SC-
Résumé du contenu de la page N° 3
SAFETY INSTRUCTIONS Safety Instructions for the Operator Safety Instructions for the Installer WARNING WARNING Do not open the equipment. Do not open the cover unless totally familiar with electrical circuits and Only qualified personnel should work inside service manual. the equipment. Improper handling can result in electrical Do not disassemble or modify the shock. equipment. Turn off the power at the switchboard Fire, electrical shock or serious injury can before beginning the in
Résumé du contenu de la page N° 4
TABLE OF CONTENTS FOREWORD ..................................................................................................................iv SYSTEM CONFIGURATION ...........................................................................................v EQUIPMENT LIST..........................................................................................................vi SOFTWARE VERSION LIST.........................................................................................
Résumé du contenu de la page N° 5
3.8 Output Data..........................................................................................................................3-8 3.8.1 Heading .....................................................................................................................3-8 3.8.2 Navigation data .........................................................................................................3-9 3.8.3 Interface ........................................................................
Résumé du contenu de la page N° 6
FOREWORD A Word to the Owner of the SC-120 FURUNO Electric Company thanks you for purchasing the FURUNO SC-120 Satellite Compass. We are confident you will discover why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for quality and reliability throughout the world. This dedication to excellence is furthered by our extensive global network of agents and dealers. Your satellite compass i
Résumé du contenu de la page N° 7
SYSTEM CONFIGURATION The SC-120 consists of three SC-series antennas, a display unit and a processor unit. The tri-antenna system helps reduce the influence of ship's motion (rolling). Antenna Unit SC-1203 DGPS Beacon Antenna GR-800-1-S Display Unit SC-602 Radar Autopilot Beacon Receiver Kit VideoPlotter GR-7001 Current Indicator Heading Data Scanning Sonar ECDIS Processor Unit Speed alarm/ SC-1201/SC-1201D Heading alarm (Contact) Analog data Repeater Compass Repeater I/F Autopilot GPS f
Résumé du contenu de la page N° 8
EQUIPMENT LIST Standard supply Name Type Code No. Qty Remarks Antenna Unit SC-1203F — 1 DGPS No whip For GR-800-SC-1-S — 1 Antenna antenna SC-1201-D Display Unit SC-602 — 1 SC-1201 — Processor Unit 1 SC-1201-D — With beacon receiver Accessories for Antenna Unit CP20-02210 000-041-743 1 CP20-02241 Accessories for Display Unit CP20-02203 — 1 Tapping screw, 5X20, 4 pcs. Installation Accessories for Processor Unit Materials MJ-A3SPF0013-035 CP20-02220 000-041-748 1 MJ-A6SP
Résumé du contenu de la page N° 9
SOFTWARE VERSION LIST DISPLAY UNIT: 205-1312-009 PROCESSOR UNIT: 205-1311-016 GPS1: 205-1313-004 GPS2: 205-1313-004 GPS3: 205-1313-004 DGPS: 085-0182-002 vii
Résumé du contenu de la page N° 10
This page is intentionally left blank.
Résumé du contenu de la page N° 11
SPECIFICATIONS OF SATELLITE COMPASS SC-120 1 GENERAL 1.1 Receiver Type 12 discrete channels GPS 1.2 RX Frequency 1575.42 MHz (L1) 1.3 Class of Service Standard Positioning service (SPS) using the C/A code on the L1 frequency 1.4 Processing All-in-view, 8-state Kalman filter 1.5 Position Accuracy 10 m (GPS), or 5 m (DGPS), 95% of the time 1.6 Heading Accuracy ±0.6° (95% static accuracy) 1.7 Follow-up 25°/s rate-of-turn 1.8 Settling Time 4 minutes 2 DISPLAY 2.1 Display Type 4.5
Résumé du contenu de la page N° 12
Sentences: MSK, GGA 5 POWER SUPPLY 12-24 VDC: 1.1-0.5 A 6 ENVIRONMENTAL CONDITION AND EMC 6.1 Ambient Temperature Display/Processor Unit -15°C to +55°C, Designed for protected area Antenna Unit -25°C to +70°C, Designed for exposed area 6.2 Damp heat 93%±3% at 40°C 6.3 Waterproofing Antenna Unit IPX6 Display Unit IPX5 Processor Unit IPX0 6.4 Vibration IEC 60945 6.5 EMC IEC 60945 7 COATING COLOR 7.1 Display/Processor Unit Panel: N3.0 Newtone No.5 (dark gray) Cover: 2.5
Résumé du contenu de la page N° 13
1 PRINCIPLE OF OPERATION Own ship's heading can be determined by decoding the data in the carrier frequency in addition to ordinary GPS parameters. In principle, a pair of two antennas A1(ref) and A2(fore), each connected with an associated GPS engine and processor, are installed along the ship's fore-and-aft line. GPS systems at A1 and A2 calculate the range and azimuth to the satellite. Difference in range between A1 and A2 is ∆λ + nλ where λ is 19 cm. “n” is automatically found durin
Résumé du contenu de la page N° 14
This page is intentionally left blank.
Résumé du contenu de la page N° 15
2 INSTALLATION 2.1 Mounting Considerations 2.1.1 SC-series antenna unit General • Keep the length of antenna cable in mind when selecting a mounting location. The cable comes in lengths of 15 meters (standard supply), or 30 m or 50 m (optional lengths). • Select a location where vibration and shock are minimal. Installing the antenna above superstructures The antenna must be mounted above all other structures on the vessel to obtain an unobstructed view of the satellites regardless o
Résumé du contenu de la page N° 16
2. INSTALLATION • The horizontal separation between the antenna and masts must be as follows: Mast diameter Separation distance (minimum) 10 cm 1.5 m 30 cm 3 m -80 +80 Separation degrees • Keep the length of antenna cable in mind when selecting a mounting location. The cable comes in lengths of 15 meters (standard supply), or 30 m or 50 m (optional lengths). • The field of view above the antenna should be as shown below, ±80° against zenith. To avoid reflections from masts a
Résumé du contenu de la page N° 17
• Locate the antenna above the radar antenna, out of the radar beam. Sc-series Antenna Radar Antenna Example of improper installation Location influenced Radar Antenna by reflected wave. Reception blocked by mast. NO! UNSUITABLE LOCATION SC-series Antenna SC-series antenna located below all other structures Bridge Example of improper installation 2.1.2 Display unit, processor unit • Choose a location where vibration and shock are minimal. • Install the units well away from location
Résumé du contenu de la page N° 18
2. INSTALLATION 2.2 Installing the Antenna Units 2.2.1 SC-series antenna unit 1. Prepare an installation post for the antenna in accordance with the illustration shown below. f 15 Recommended Flange Gasket (Option) (supplied in installation materials) Name: Flange Type: OP20-31 BOW Code No.: 004-378-230 Weld all the way around. Bow direction is Post should be constructed from between antennas stainless steel and measure #1 and #2. 4mm or larger in thickness. f 60.5 mm 3 mm or less The
Résumé du contenu de la page N° 19
2. INSTALLATION 2. Fix the antenna unit to the post as shown below. 3 1 2 Fix the antennas #1 and #2 on Set the antenna the fore-and-aft line of the ship, unit to the flange. with the #2 a ntenna forward of the #1. Flat washer Spring washer Nut (Torque: 29.58 Nm) Fastening antenna unit to a post 3. Coat each nut, bolt and washer with silicone rubber for waterproofing. Coat bolt, nut and washer completely with silicone rubber. Coating bolt, nut and washer with silicone rubber 2-5
Résumé du contenu de la page N° 20
2. INSTALLATION 4. As shown below, make a loop in the antenna cable and fasten the antenna cable to the antenna post with two cable ties. Coat bolt threads with Three Bond. Fasten bolt with nuts and then coat nuts with Three Bond also. Coat with Three Bond 1211 (supplied). Fix antenna cable. 5. Coat bolt threads with Bird-repellent fixture Three Bond 1211. Fasten bolts with nuts. Coat nuts at the bottom of each antenna element with Three Bond 1211. 6. Paint post and support pla
