Résumé du contenu de la page N° 1
16-Channel VoIP Gateway Card
Programming Guide
Model No. KX-TDA0490
Thank you for purchasing a Panasonic 16-Channel VoIP Gateway Card.
Please read this manual carefully before using this product and save this manual for future use.
Résumé du contenu de la page N° 2
Table of Contents 1 IP-GW16 Maintenance Utility .................................................................3 1.1 Starting the IP-GW16 Maintenance Utility.......................................................................4 2 Administrator Functions........................................................................7 2.1 Main Menu for the Administrator.....................................................................................8 2.2 Programming................................
Résumé du contenu de la page N° 3
Section 1 IP-GW16 Maintenance Utility Programming of the VoIP Gateway Card is carried out through a web programming utility called the IP-GW16 Maintenance Utility. This section provides the start-up procedure for the IP- GW16 Maintenance Utility. Programming Guide 3
Résumé du contenu de la page N° 4
1.1 Starting the IP-GW16 Maintenance Utility 1.1 Starting the IP-GW16 Maintenance Utility There are 2 different log-in levels to the IP-GW16 Maintenance Utility, a web programming utility for the VoIP Gateway Card: Administrator level and Installer level. These levels provide different programming options. For full discussions of Administrator-level programming and Installer-level programming, refer to "2 Administrator Functions" and "3 Installer Functions", respectively. System Requirements
Résumé du contenu de la page N° 5
1.1 Starting the IP-GW16 Maintenance Utility Notes If another user is already logged in, you will be rejected. For readability of the text on the screen, it is recommended that you adjust the text size of Internet Explorer to below medium. If you finish a programming session without logging out from the card (e.g., quitting Internet Explorer, or returning to the log-in screen with the "Back" button of Internet Explorer), you cannot log in again for the period of time specified by the pa
Résumé du contenu de la page N° 6
1.1 Starting the IP-GW16 Maintenance Utility 6 Programming Guide
Résumé du contenu de la page N° 7
Section 2 Administrator Functions This section provides operating instructions for the IP-GW16 Maintenance Utility when logged in as the Administrator. Programming Guide 7
Résumé du contenu de la page N° 8
2.1 Main Menu for the Administrator 2.1 Main Menu for the Administrator The IP-GW16 Maintenance Utility provides the following menu to a user logged in as the Administrator. 8 Programming Guide
Résumé du contenu de la page N° 9
2.1 Main Menu for the Administrator Programming Menu Section Reference 1.1 Network Settings, General 2.2.1 Network Parameters 1.2 H.323 Detailed Settings 2.2.2 H.323 Parameters 1.3 Voice Communication Detailed Settings 2.2.3 Voice Communication Parameters 1.4 VoIP Gateway/IP-PBX Interface Settings 2.2.4 VoIP Gateway/IP-PBX Interface Parameters 1.5 Hunt Pattern (for Incoming Calls) 2.2.5 Hunt Pattern Parameters 1.6 DN2IP (Dialed Number to IP Address 2.2.6 Address Translation Table—GW Entry Transl
Résumé du contenu de la page N° 10
2.2 Programming 2.2 Programming 2.2.1 Network Parameters 1. Click 1.1 Network Settings, General in the main menu. Current IP Address, Current Subnet Mask, and Current Default Gateway show the current IP address settings of the VoIP Gateway Card. 2. Assign each parameter referring to the descriptions below. At any time during the session, you can: Click ALL CLEAR to return all parameters to their previous values. Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator
Résumé du contenu de la page N° 11
2.2 Programming Parameter Descriptions The parameters indicated with "#" must be changed while the card is in the "STOP" status (see "2.3.1 Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot"). IP Address Settings Parameter & Description Default Value Range # 192.168.1.200 The following addresses IP Address are invalid: Specifies the IP address of the card. Class D addresses For more information, consult your network administrator. Class E add
Résumé du contenu de la page N° 12
2.2 Programming HTTP Settings Parameter & Description Default Value Range # 80 1 to 65535 HTTP Port No. Specifies the port number for HTTP communications by the card. Generally, there is no need to change the default value. QSIG Connectionless Tunneling Settings Parameter & Description Default Value Range # 1718 1 to 65535 QSIG Connectionless Tunneling Port No. Specifies the port number for connectionless tunneling between cards at different locations in a QSIG network. Generally, there is no
Résumé du contenu de la page N° 13
2.2 Programming server to assign a static IP address to the card from a pool of IP addresses that is defined in advance. For more information about DHCP server settings, consult your network administrator. In addition, it is also necessary to specify the values for the parameters under IP Address Settings as they will be assigned by the DHCP server. Programming Guide 13
Résumé du contenu de la page N° 14
2.2 Programming 2.2.2 H.323 Parameters 1. Click 1.2 H.323 Detailed Settings in the main menu. 2. Assign each parameter referring to the descriptions below. At any time during the session, you can: Click ALL CLEAR to return all parameters to their previous values. Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator"). Click LOGOUT to log out from the IP-GW16 Maintenance Utility (see "2.5.2 Log Out"). 3. Click OK. You will see a confirmation screen. Note If your e
Résumé du contenu de la page N° 15
2.2 Programming Parameter Descriptions The parameters indicated with "#" must be changed while the VoIP Gateway Card is in the "STOP" status (see "2.3.1 Status Control"). The changes must be followed by a reboot to become effective (see "2.5.1 Reboot"). The parameters indicated with "*" must be changed while the card is in the "STOP" status (see "2.3.1 Status Control"). The changes do not have to be followed by a reboot to become effective. Port No. Settings Parameter & Description Default Val
Résumé du contenu de la page N° 16
2.2 Programming Voice CODEC Settings Parameter & Description Default Value Range * 1st: G.729A G.723.1, Voice CODEC Priority 1st–4th 2nd: No default G.729A, Specifies the type of CODEC for voice communications. 3rd: No default G.711Mu, Choose the appropriate CODEC for the network environment 4th: No default G.711A (e.g., bandwidth, CODEC conditions of the remote terminal). When using multiple CODECs, set them in an appropriate priority order. Prior to establishing a call, a negotiation takes
Résumé du contenu de la page N° 17
2.2 Programming Parameter & Description Default Value Range * 00 (disable), Gatekeeper Connection Checking Interval (min) 0- 1 to 1440 1440min Specifies the time (in minutes) between periodic checks of connection to the gatekeeper. When the primary gatekeeper fails, these checks can detect the failure. In this case, the connection automatically switches to the secondary gatekeeper if it is available, so that the network remains functional. * Call Signaling Model Direct Direct, Routed (via S
Résumé du contenu de la page N° 18
2.2 Programming 2.2.3 Voice Communication Parameters 1. Click 1.3 Voice Communication Detailed Settings in the main menu. 2. Assign each parameter referring to the descriptions below. At any time during the session, you can: Click ALL CLEAR to return all parameters to their previous values. Click MENU to return to the main menu (see "2.1 Main Menu for the Administrator"). Click LOGOUT to log out from the IP-GW16 Maintenance Utility (see "2.5.2 Log Out"). 3. Click OK. 18 Programming Guide
Résumé du contenu de la page N° 19
2.2 Programming You will see a confirmation screen. Note If your entry contains an invalid value, you will be prompted to correct your input. Enter correct values for the parameters shown in red and try again. 4. Confirm your entry and click OK. To return to the previous screen, click CANCEL. Parameter Descriptions QoS Field Settings The parameters below are used to set the ToS (Type of Service) field in the header of IP packets to control QoS of VoIP communications. For more information about
Résumé du contenu de la page N° 20
2.2 Programming Jitter buffer Settings (G.711 for Fax) Parameter Default Value Range 50 10 × n (n = 4–10) Jitter Buffer Minimum (ms) 500 10 × n (n = 4–50) Jitter Buffer Maximum (ms) CODEC Frame Settings The parameters below are used to set the interval between packet transmissions for each type of CODEC. It is recommended that all VoIP Gateway Cards in a VoIP network have the same settings for these parameters. For details, refer to "Detailed Explanations". Parameter Default Value Range 30 30,
