Résumé du contenu de la page N° 1
BiPAC 6404VP / 6404VGP
VoIP/(802.11g) Broadband
Firewall Router
User’s Manual
Version Release 5.08a
Last Revision Date: 05-07-2007
Résumé du contenu de la page N° 2
Table of Contents Table of Contents CHAPTER 1: INTRODUCTION .............................................................................................................. 3 INTRODUCTION TO YOUR ROUTER ............................................................................................................. 3 FEATURES .................................................................................................................................................. 3 CHAPTER 2: INSTALLIN
Résumé du contenu de la page N° 3
Restart Router................................................................................................................................. 42 User Management........................................................................................................................... 43 Firewall and Access Control .............................................................................................................. 44 General Settings..................................................
Résumé du contenu de la page N° 4
VoIP/(802.11g) Broadband Firewall Router Chapter 1: Introduction Introduction to your Router Welcome to the VoIP Broadband Firewall Router. The router is an “all-in-one” VoIP Broadband router, combining a Broadband router, Ethernet network switch and 2 ports for Voice over IP functionalities, providing everything you need to get the machines on your network connected to the Internet over your DSL/Cable broadband connection. With features such as a Quick-Start wizard and DHCP Server, you
Résumé du contenu de la page N° 5
VoIP/(802.11g) Broadband Firewall Router Network Address Translation (NAT) Allows multi-users to access outside resources such as the Internet simultaneously with one IP address/one Internet access account. Many application layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E-mail, News, Net2phone, Ping, NetMeeting, IP phone and others. SOHO Firewall Security with DoS and SPI Along with the built-in NAT natural firewall feature, the router also provides advanc
Résumé du contenu de la page N° 6
VoIP/(802.11g) Broadband Firewall Router It supports web based GUI for configuration and management. It is user-friendly and comes with on-line help. It also supports remote management capability for remote users to configure and manage this product. Firmware Upgradeable Device can be upgraded to the latest firmware through the WEB based GUI. Rich Management Interfaces It supports flexible management interfaces with local console port, LAN port, and WAN port. Users can use ter
Résumé du contenu de la page N° 7
VoIP/(802.11g) Broadband Firewall Router Chapter 2: Installing the Router Important note for using this router Do not use this router in high humidity or high temperatures. Do not use the same power source for this router as other equipment. Do not open or repair the case yourself. If this router is too hot, turn off the power immediately and have it repaired at a qualified Warning service center. Avoid using this product and all accessories outdoors.
Résumé du contenu de la page N° 8
VoIP/(802.11g) Broadband Firewall Router The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. Lit when connected to an ADSL modem or Cable modem's 3 WAN Ethernet port well Lit when connected to an Ethernet device. LAN Port 4 – 6 Green for 100Mbps; Orange for 10Mbps. 1X — 3X (RJ-45 connector) Blinking when data is Transmitted / Received. WLAN Lit green when the wireless connection is established. 7 (Wireless Router Only) Flashes when
Résumé du contenu de la page N° 9
VoIP/(802.11g) Broadband Firewall Router The Rear Ports 5 6 1 3 7 2 4 The Ethernet Port # 3 can be used as a console port. You need a special console tool which already includes in the package to connect with LAN port 3 and PC’s RS-232 port (9-pin serial port). Port Meaning Power Switch 1 Power ON/OFF switch PWR 2 Connect the supplied power adapter to this jack. To be sure the device is being turned on press RESET button for: 1-3 seconds: quick reset th
Résumé du contenu de la page N° 10
VoIP/(802.11g) Broadband Firewall Router Connect RJ-11 cable to this port when connecting to the LINE 7 telephone wall jack. Cabling The most common problem associated with Ethernet is bad cabling. Make sure that all connected devices are turned on. On the top of the product is a bank of LEDs, as a first check, verifies that the relevant LAN Link and WAN Link LEDs are lit. If they are not, verify that you are using the proper cables. 9 Chapter 2: Installing the router
Résumé du contenu de la page N° 11
VoIP/(802.11g) Broadband Firewall Router Chapter 3: Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The product provides an easy and user-friendly interface for configuration. Please check your PC’s network components. The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to your Windows-re
Résumé du contenu de la page N° 12
VoIP/(802.11g) Broadband Firewall Router Connecting Your Router 1. (a) ATA Mode: Connect the ATA to a WAN (Connect to ADSL modem/router). (b) Broadband Router Mode: Connect the Router to a LAN (Local Area Network) and WAN (Connect to Cable or ADSL modem). 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the WAN and relevant LAN LED are lit. 4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set. 5. Connect RJ-11 cable to LINE P
Résumé du contenu de la page N° 13
VoIP/(802.11g) Broadband Firewall Router Configuring PCs in Windows in Window XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network Connections. 2. Double-click Local Area Connection. (See Figure 3.1) Figure 3.1: LAN Area Connection 3. In the LAN Area Connection Status window, click Properties. (See Figure 3.2) Figure 3.2: LAN Connection Status 4. Select Internet Protocol (TCP/IP) and click P
Résumé du contenu de la page N° 14
VoIP/(802.11g) Broadband Firewall Router Configuring PCs in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and Dial-up Connections. 2. Double-click Local Area (“LAN”) Connection. (See Figure 3.5) Figure 3.5: LAN Area Connection 3. In the LAN Area Connection Status window, click Properties. (See Figure 3.6) Figure 3.6: LAN Connection Status 4. Select Internet Protocol (TCP/IP) and cl
Résumé du contenu de la page N° 15
VoIP/(802.11g) Broadband Firewall Router Configuring PC in Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. (See Figure 3.9) 3. Click Properties. Figure 3.9: TCP / IP 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button
Résumé du contenu de la page N° 16
VoIP/(802.11g) Broadband Firewall Router Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. (See Figure 3.12) Figure 3.12: TCP / IP 3. Select the Obtain an IP address from a DHCP server radio button and click OK. (See Figure 3.13) Figure 3.13: IP Address 15 Chapter 3:
Résumé du contenu de la page N° 17
VoIP/(802.11g) Broadband Firewall Router Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “admin” and “admin” respectively. If you ever forget the username/password to login to the router, you may press the RESET button up to 6 seconds to restore the factory default settings. Caution: After pressing the RESET button for
Résumé du contenu de la page N° 18
VoIP/(802.11g) Broadband Firewall Router Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP (Fixed IP Address) and PPPoE. Gather the information as illustrated in the following table and keep it for reference. Configure this WAN Interface to use DHCP client protocol to get an IP address DHCP from your ISP automati
Résumé du contenu de la page N° 19
VoIP/(802.11g) Broadband Firewall Router Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”, a user name and password window prompt will appear. The default username and password are “admin” and “admin” respectively. (See Figure 3.14) Figure 3.14: User name & Password Prompt Widonw Congratulation! You are now successfully logon to the VoIP/(802.11g) Broadband Router!
Résumé du contenu de la page N° 20
VoIP/(802.11g) Broadband Firewall Router Chapter 4: Configuration At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: Status - ARP Table - Wireless Association Table (Wireless Router Only) - Routing Table - DHCP Table - Email Status - VoIP Status - Event Log - Error Log - NAT Sessions - Diagnostic - UPnP Portmap ATA / Router Mode Configuration - LAN - System - Firewall - VoIP
