Résumé du contenu de la page N° 1
GE Fanuc Automation
Programmable Control Products
TCP/IP Ethernet Communications
for the Series 90 -70 PLC
User’s Manual
GFK-1004B January 1996
Résumé du contenu de la page N° 2
GFL–002 Warnings, Cautions, and Notes as Used in this Publication Warning Warning notices are used in this publication to emphasize that hazardous voltages, currents, temperatures, or other conditions that could cause personal injury exist in this equipment or may be associated with its use. In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used. Caution Caution notices are used where equipment might be damaged if care is not taken. No
Résumé du contenu de la page N° 3
Preface Content of this Manual Chapter 1. Introduction: Discusses the TCP/IP Ethernet Interface, the communica- tions software, and the GEnet System Manager. Chapter 2. Installing the TCP/IP Ethernet Interface: Describes the basic features of the TCP/IP Ethernet Interface, the installation and power-up of the Inter- face, and a procedure for the initial checkout of the Interface on your Ether- net cable. Chapter 3. The GEnet System Manager-Station Configuration: Describes the instal- latio
Résumé du contenu de la page N° 4
Preface Related Publications GFK-0262 Series 90 -70 Programmable Controller Installation and Operation GFK-0263 Logicmaster 90 Programming Software User’s Manual GFK-0265 Logicmaster 90 Programming Software Reference Manual GFK-1029 Logicmaster 90 -70-Ethernet TCP/IP User’s Manual GFK-0870 Host Communications Toolkit for C/C++ Applications User’s Manual GFK-1026 Host Communications Drivers for Microsoft Windows User’s Manual GFK-1063 Host Communications Toolkit for Visual Basic Applica
Résumé du contenu de la page N° 5
Contents Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 The Ethernet Communications System . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 The Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 The GEnet System Manager (GSM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 How to Make it Work . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 6
Contents Procedure 6: Pinging the TCP/IP Interfaces on the Network . . . . 2-30 Chapter 3 The GEnet System Manager–Station Configuration . . . . . . . . . . . . . 3-1 What is the GSM? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 Why Does a Station Have to be Configured and Downloaded? . . . . . . . . . . 3-2 Connecting the GSM to the LAN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Section 1: Installing and S
Résumé du contenu de la page N° 7
Contents Section 4: Accessing the Station Manager . . . . . . . . . . . . . . . . . . . . 3-32 Access Station Manager Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32 Section 5: Using the GSM Support Functions . . . . . . . . . . . . . . . . . 3-33 List All Stations Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33 Setup GSM Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 8
Contents Section 5: Controlling Communications in the Ladder Program . 4-34 Essential Elements of the Ladder Program . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34 Troubleshooting Your Ladder Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37 Monitoring the Communications Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-38 Sequencing Communications Requests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39 Data Transfers with O
Résumé du contenu de la page N° 9
Contents Section 3: Command Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15 CHANNEL Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 BPS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17 CHBPS Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17 CHDATE Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 10
Contents Chapter 6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Using this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 What to do if you Cannot Solve the Problem . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 The Power-Up State . . . . .
Résumé du contenu de la page N° 11
Contents Appendix D Sample DOS System Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1 3Com Etherlink II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2 3Com Etherlink 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3 3Com Etherlink 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4 3Com Etherlink /MC . . . . . . . . .
Résumé du contenu de la page N° 12
Contents Figure 1-1. Major Components of the TCP/IP LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Figure 1-2. The Main Tasks for Installing the TCP/IP Ethernet Communications System . . . . . . . . . . 1-6 Figure 2-1. Ethernet Controller Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Figure 2-2. Ethernet Controller Installation in the Series 90-70 PLC . . . . . . . . . . . .
Résumé du contenu de la page N° 13
Contents Table 2-1. Ethernet Controller Board Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Table 3-1. 802.3/Ethernet Cards for the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Table 3-2. Default PC Hardware Settings for 802.3/Ethernet Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Table 3-3. GSM Keyboard Functions (Alt-K) . . . . . . . . . . . . . .
Résumé du contenu de la page N° 14
Contents Table 6-7. Troubleshooting with ONLINE LED OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9 Table 6-8. Troubleshooting with ONLINE LED ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10 Table 6-9. Exception Log Event Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10 Table 6-10. Exception Log Event Codes . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 15
Restarts for autonumbers that do not restart in each chapter. these restarts must be in the header frame of chapter 1. Reminders for autonumbers that need to be restarted figure bi level 1, reset a:ebx, l 1 resetA manually (first instance will always be 4) table_big level 1, reset a:obx:l 1, resetA let_in level 1: A. B. C. chap_big level 1, reset1 a:bigbx level 1 resetA letter level 1:A.B.C. app_big level 1, resetA a:ftr level 1 resetA num level 1: 1. 2. 3. figure_ap level 1, reset c:ebx, l 1
Résumé du contenu de la page N° 16
1 The Ethernet Interface allows you to directly attach the Series 90-70 PLC to an Ethernet LAN via a user-supplied transceiver and AUI cable, and to communicate with other PLCs, hosts, and other control devices on the network. The Ethernet Interface for the Series 90-70 PLC has “client/server ” capability. As a “cli- ent” it can initiate communications with other Series 90 PLCs containing Ethernet Inter- faces. This is done from the PLC ladder program using the COMMREQ function. As a “server”
Résumé du contenu de la page N° 17
1 Maintain Compatibility with other GE Fanuc devices, as well as with devices from other vendors. The GE Fanuc Series 90–70 PLC with TCP/IP Ethernet Interface is compatible with the Series 90-30 PLC with TCP/IP Ethernet Interface. It is also compatible with GE Fanuc Logicmaster 90-70 TCP/IP Ethernet and GE Fanuc HCT Ethernet products available on DEC, HP, IBM, and other computer platforms running TCP/IP. Diagnose and maintain your system, using diagnostic and station management tools. You
Résumé du contenu de la page N° 18
1 10Broad36: 10Broad36 uses 75-ohm coaxial cable and CATV-like media components (taps, amplifiers, headend translators, etc.) to support hundreds of nodes at distances of up to 2800 meters. Broadband cannot be connected to baseband via repeaters. Broad- band cable plant design and installation must be in accordance with IEEE 802.7 and re- quires special expertise. GE Fanuc recommends you contract professional specialists for these services. Consult your GE Fanuc sales representative or fie
Résumé du contenu de la page N° 19
1 Note Typically, there will be only one GSM on the network. It will contain configuration information and communications software for all the GEnet stations on the network. The Configuration Editor The Configuration Editor is a menu–driven software package that is part of the GSM. It is used offline to examine and modify configuration parameters for the GE Fanuc Series 90-70 Ethernet Interfaces on your network. These configuration parameters are stored in files on the PC hard disk and subse
Résumé du contenu de la page N° 20
1 How to Make it Work There are a number of tasks required to get your Ethernet Communications System working. These tasks involve not only the Ethernet Interface and the GEnet System Manag- er Software, but also Logicmaster Configuration and Programming Software. The figure below illustrates what the tasks are for each part of the system. a45402 User supplied Series 90–70 IBM PC PLC compatible Ethernet Interface GSM software Logicmaster software Install Interface in PLC Install GSM software I
