Instruction d'utilisation EnGenius Technologies EAP150

Résumé du contenu de la page N° 1

EnGenius® Quick Installation Guide
EAP150 802.11b/g/n Wireless Access Point

Package Contents
Unpack the box and verify the contents:
• EAP150 802.11b/g/n Wireless Access Point
• Category 5 Ethernet Cable
• Power Adaptor
• Wall Mount Kit
• EAP150 802.11b/g/n Wireless Access Point Quick Installation Guide
• EAP150 802.11b/g/n Wireless Access Point Instruction Manual
• Resource CD

Setting up the EAP150
After verifying the contents of the box, continue on t

Résumé du contenu de la page N° 2

Computer Setup 1) After ensuring the EnGenius device is powered on and plugged in, ensure that your computer is on. 2) For the next steps, refer to your Operating System User Manual. 3) Once your computer is on, ensure that your TCP/IP is set to On or Enabled. (In the control panel, double click Network Connections and then double click on the connection of your Network Interface Card (NIC). Select Internet Protocol (TCP/IP) and then click on the Properties button.) 4) If your PC is alr

Résumé du contenu de la page N° 3

6) Click Apply. 7) All basic setup is completed. Note: The wireless connection is not secure. To setup security on the EAP150, refer to the EAP150 User Manual. Also, to share internet connection, the Ethernet Card that the EAP150 must be bridge to another Ethernet Card with an internet connection. Refer to your Operating System User Manual for more information.