Résumé du contenu de la page N° 1
LMC5207A-R2 LMC5228A LMC5205ALMC5234A LMC5227A
LMC5208A-R2 LMC5203A LMC5206ALMC5235A
LMC5227A-R2 LMC5204A LMC5233ALMC5236A
High-Density Media Converter System II
Choose from a wide variety of chassis and modules to
build a powerful media-converter solution.
Customer Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Support FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
Informatio
Résumé du contenu de la page N° 2
FCC and Industry Canada RF Interference Statements Class A This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable pr
Résumé du contenu de la page N° 3
This digital apparatus does not exceed the Class B limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of Industry Canada. Product Description Version FCC FCC Class A Class B Dual AC 20-Slot Rackmount Chassis Dual DC ACDC AC 6-Slot Rackmount/Desktop Chassis Dual AC DC Dual DC AC 3-Slot Desktop Chassis 2AC DC 2DC ACDC Normas Oficiales Mexicanas (NOM) Electrical Safety Statement Instrucciones de
Résumé du contenu de la page N° 4
11. El aparato eléctrico deberá ser conectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indique en el aparato. 12. Precaución debe ser tomada de tal manera que la tierra física y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del a
Résumé du contenu de la page N° 5
Table of Contents FCC and Industry Canada RF Interference Statements ................................. ii Normas Oficiales Mexicanas (NOM) Electrical Safety Statement ..................iii Part Numbers ............................................................................................. 1 20-Slot Rackmount Chassis ............................................................................... 1 Back Up, Spares, Sold Separately ......................................................
Résumé du contenu de la page N° 6
DC Power Supply Wiring Instructions .............................................................. 14 User-Replaceable Power Supplies............................................................... 14 Fans............................................................................................................... 14 Installing Management and Application Modules ......................................... 15 Installing Applications Modules.......................................................
Résumé du contenu de la page N° 7
Part Numbers 20-Slot Rackmount Chassis Part Number Description LMC5200A SNMP Management Module LMC5207A-R2 20-Slot, w/Dual AC Power LMC5208A-R2 20-Slot, w/Dual DC Power LMC5227A-R2 20-Slot, W/Fixed Single AC Power LMC5228A 20-Slot, w/ACDC Power Back Up, Spares, Sold Separately Part Number Description LMC5210A Power Supply Module for LMC5207A-R2 LMC5210A-R2 Power Supply Module for LMC5207A-R2 LMC5212A Power Supply Module for LMC5208A-R2 LMM090 Serial Cable for SNMP, DB9 Male to DB
Résumé du contenu de la page N° 8
3-Slot Desktop Chassis Part Number Power Supply 2 LMC5233A 3-Slot, w/AC Power LMC5234A 3-Slot, w/Dual AC Power LMC5235A 3-Slot, w/DC Power LMC5236A 3-Slot, w/Dual DC Power LMC5237A 3-Slot, w/ ACDC Power Back Up, Spares, Sold Separately Part Number Description LMC5200A SNMP Management Module includes Black Box and iView² LMC5238A 19 inch Rackmount shelf and screws 2
Résumé du contenu de la page N° 9
About the 20-Slot Rackmount Chassis The 20-Slot Rackmount Chassis series is a modular chassis platform designed for use with Black Box Simple Network Management Protocol (SNMP) manageable series of modules. The 20-Slot Rackmount Chassis is a 3U high, Rackmountable chassis that features 20 slots for installing application series modules plus an additional slot for installing an SNMP Management Module. Some 20-Slot Rackmount Chassis models are capable of redundant power supply modules. Po
Résumé du contenu de la page N° 10
Reset Alarm Button When one power supply module malfunctions, an audible alarm sounds indicating the loss of the power module. The alarm can be silenced by pressing the Alarm Reset Button, located next to the power connector on the power supply module. If this occurs, remove and replace the power supply module immediately. (LEDs on the Management Module and the power supply module itself also indicate power supply module failures.) Last Gasp Alarm The 20-Slot Rackmount Chassis includ
Résumé du contenu de la page N° 11
LNK/ACT Glows green when a link is established on port. Blinks green when data activity occurs. Glows yellow when port is in Full-Duplex mode. FDX/COL Blinks yellow when port is operating in Half- Duplex mode and collisions occur. Glows yellow when temperature of unit surpasses a TEMP user-defined level. Glows yellow when one module malfunctions. PS Glows yellow when a fan malfunctions. FAN A / FAN B Installing the 20-Slot Rackmount Chassis Install the chassis first before
Résumé du contenu de la page N° 12
7. Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on over current protection and supply wiring. 8. Reliable Grounding - Reliable grounding of Rackmounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips). 9. All AC and DC versions are intended for use
Résumé du contenu de la page N° 13
Installing SNMP Management and Application Modules To install a module: 1. Remove the blank bracket (if present) covering the slot where the module will be installed. Black Box recommends installing blank brackets in unused module slots. 2. Slide the module into the chassis using the card guides. 3. Secure the module to the chassis by tightening the captive screw. (Refer to the documentation shipped with the module for configuration information.) 4. When installing modules observe ESD p
Résumé du contenu de la page N° 14
Replacing Power Supply Modules User-Replaceable Power Supply Modules While power supply modules are redundant, failed power supply modules should promptly be replaced to maintain network integrity and prevent data loss. To replace a power supply module: 1. Disconnect the power source from the power supply module. 2. Remove the screws of the retainer plate (on some AC modules). 3. Move the Power Supply Release switch toward the right or unscrew captive release screw. 4. Before grasping
Résumé du contenu de la page N° 15
Dual DC, Part Number LMC5208A-R2 NOTE Do not mix AC and DC power supply modules. 9
Résumé du contenu de la page N° 16
ACDC, Part Number LMC5228A PS1 Status Reset LED PS PS Alarm Rel Rele ea as se e Switch Sc Scr re ew w Power DC Power Supply Connector Module 1 (PS1) PS2 Status Power LED Supply Module 2 (PS2) AC Power Connector Redundant ACDC Power Supply, Close-Up NOTE For LMC5228A 20-Slot Rackmount Chassis, all models in that model number series can support Dual AC, Dual DC or ACDC. The power supply modules for that model number series are interchangeable. 20-Slot Rackm
Résumé du contenu de la page N° 17
About the 6-Slot Rackmount/Desktop Chassis The 6-Slot Rackmount/Desktop Chassis, is a modular chassis platform designed for use with Black Box Simple Network Management Protocol (SNMP) manageable series of modules. The 6-Slot Rackmount/Desktop Chassis is 1U high, Rackmountable, and supports optional redundant power supply modules, as well as an SNMP Management Module. 6-Slot Rackmount/Desktop Chassis Features The 6-Slot Rackmount/Desktop Chassis offers a line of models including single AC
Résumé du contenu de la page N° 18
� Both power supply modules malfunction � Both power supply modules are powered down � When the AC line fails Temperature Gauge The 6-Slot Rackmount/Desktop Chassis includes a temperature monitoring gauge with a heat sensor on the backplane of the chassis. Users define a threshold for chassis temperature via SNMP. If the chassis’ temperature rises above the specified level, the SNMP agent sends a trap (configured in iView²) to the administrator. There is also an LED indicator on the SN
Résumé du contenu de la page N° 19
LNK/ACT Glows green when a link is established on port. Blinks green when data activity occurs. Glows yellow when port is in Full-Duplex mode. FDX/COL Blinks yellow when port is operating in Half- Duplex mode and collisions occur. Glows yellow when temperature of unit TEMP surpasses a user-defined level. Glows yellow when one power supply module PS malfunctions. Glows yellow when a fan malfunctions. FAN A / FAN B Installing the 6-Slot Rackmount/Desktop Chassis Install t
Résumé du contenu de la page N° 20
8. Reliable Grounding - Reliable grounding of Rackmounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips). 9. All AC and DC versions are intended for use in a Restricted Access Location (RAL). DC Power Wiring, Replacing Power Supply and Fans DC Power Supply Wiring Instructions The following diagram shows the wiring configurations for -48 VDC power supply for the 6- Sl
