Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Where to Find Information Unpacking Guide Provides you with information and instructions on how to unpack and place the printer. Before using the printer, you need to remove all protective materials as described in the instructions contained in this guide. Setup Guide (this manual) Provides you with information on assembling the printer’s parts and installing printer options. Reference Guide Provides you with detailed information on the printer’s functions, maintenance, troubleshooting, and
Résumé du contenu de la page N° 3
® Laser Printer All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein. Neither SEIKO EPSON CORPO
Résumé du contenu de la page N° 4
Declaration of Conformity According to ISO/IEC Guide 22 and EN 45014 Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 Japan Representative: EPSON EUROPE B.V. Address: Prof. J. H. Bavincklaan 5 1183 AT Amstelveen The Netherlands Declares that the Product: Product Name: Laser Printer Model: XJB-1 Conforms to the following Directive(s) and Norm(s): Directive 89/336/EEC: EN 55022 Class B EN 61000-3-2 EN 61000-3-3 EN 50082-1 IEC 801-2 IEC 801-3
Résumé du contenu de la page N° 5
Contents 1 Safety Instructions Laser Printer Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warnings, Cautions, and Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Assembling the Printer Installing the Imaging Cartridge. . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Installing the Options Memory Module . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 6
5 After This... What to do next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Using the Online Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 System requirements for the Online Guide. . . . . . . . . . . . . 39 ® Installing Microsoft Internet Explorer . . . . . . . . . . . . . . . 40 6 Safety Information Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 CDRH Regulations. . .
Résumé du contenu de la page N° 7
1 Safety Instructions Laser Printer Precautions This printer uses laser technology. The following list of precautions applies whenever you open the printer cover. Even if you are familiar with other types of printers, be sure to follow these precautions carefully to ensure safe, efficient operation. ❏ Do not touch the areas specified on the caution label inside the rear cover. If the printer has been in use, these areas can be very hot. CAUTION Hot Surface Avoid Contact Safety Instruction
Résumé du contenu de la page N° 8
❏ Do not touch the areas specified on the long yellow caution labels inside the printer. This label is located inside the front cover, visible after the Imaging Cartridge has been removed. If the printer has been in use, these areas may be very hot. ❏ Do not touch the components inside the printer unless instructed to do so in this guide. ❏ Never force the printer’s components into place. Although the printer is designed to be sturdy, rough handling can damage it. ❏ Be sure not to scratch
Résumé du contenu de la page N° 9
❏ Avoid exposing the Imaging Cartridge to light, and never open the drum’s protective cover as this may damage the light sensitive drum. Overexposure of the drum may cause very dark or light areas to appear on printed documents and reduce its functional life. ❏ When handling the cartridge, always set it on a clean, smooth surface. ❏ Do not attempt to modify or take apart the cartridge. It cannot be refilled. ❏ Do not touch the toner and avoid all contact with your eyes. ❏ Allow the Imag
Résumé du contenu de la page N° 10
To get the best print quality, do not store the Imaging Cartridge in an area subject to direct sunlight, dust, salty air, or corrosive gasses (such as ammonia). Avoid locations subject to high temperatures, humidity, or abrupt changes in temperature or humidity. Also, be sure to keep the consumable components out of the reach of children. Hinweis: Die Geräteanschlußleitung muß den einshlägigen Normen genügen. Es muß eine dreiadrige Leitung verwendet werden. Die Anshlußleitung darf nicht lei
Résumé du contenu de la page N° 11
❏ Connect your printer to a power source as specified on its attached label. If you are unsure the specifications of the electrical outlet consult your dealer or the local power company. ❏ If you are unable to insert the plug into the electrical outlet, contact an electrician to have your outlet repaired or replaced. ❏ Do not put your printer where the cord might be stepped on. ❏ Avoid using electrical outlets that other appliances are plugged into. ❏ Only use an electrical outlet that mee
Résumé du contenu de la page N° 12
A. If liquid has been spilled into it. B. If it has been exposed to rain or water. C. If it does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. D. If it has been dropped or the cabinet has been damaged. E. If it exhibits a di
Résumé du contenu de la page N° 13
2 Assembling the Printer Installing the Imaging Cartridge Caution: ❏ Do not turn the Imaging Cartridge upside down after the c protective tape has been removed as this causes the toner to spill. ❏ Avoid exposing the Imaging Cartridge to light, and never open the drum's protective cover as this may damage the light sensitive drum. Overexposure of the drum may cause very dark or light areas to appear on printed documents and reduce its functional life. ❏ We recommend the use of genuine EP
Résumé du contenu de la page N° 14
1. While holding the Imaging Cartridge horizontally, gently shake it a few times to distribute the toner evenly. 2. Push the button on the front cover of your printer and open it as shown below. 8 Assembling the Printer
Résumé du contenu de la page N° 15
3. Remove the two orange pieces of protective material from both sides of the inside of the printer, as shown below. 4. Pull out the protective strip that is located on the right side of the cartridge. Assembling the Printer 9
Résumé du contenu de la page N° 16
5. Note the arrows on the left and right sides inside the printer. Slide the Imaging Cartridge, in the direction of the arrows, at a slight downward angle into the printer. Push the cartridge into the printer until it is firmly seated in its proper position. Caution: To avoid spilling toner, do not tilt the Imaging Cartridge. c 6. Close the front cover of the printer by pushing it upward until it clicks into place. Caution: Never transport the printer while the Imaging Cartridge is c in
Résumé du contenu de la page N° 17
3 Installing the Options You can install the memory module, ROM module, Hard Disk Drive, Interface Card, Duplex Unit, Multibin Unit, Shifter, and Envelope Feeder to the printer. See the installation instructions for the option you want to install. Follow the instructions that correspond to the option you need to install. Memory Module By installing a memory module, you can increase printer memory to 256 MB. You may want to add memory if you are having difficulty printing complex, graphics-
Résumé du contenu de la page N° 18
Note: If you installed an optional memory module, Installed Memory shows the total size including both default 16 MB and the optional module’s size. However, if you installed one 256 MB-DIMM, the status sheet shows just 256 MB because the maximum memory size for this printer is 256 MB. Warning: Avoid touching electrical components that are exposed after you w have removed the printer's casing. They may be very hot if the printer has been in use. 1. Make sure the printer is off. 2. Face
Résumé du contenu de la page N° 19
Note: The two retaining screws are attached to the printer casing to prevent them from falling off. 4. Slots for memory modules are shown below. CN12 5. Pull the clips on each side of the CN12 outward. 6. Hold the memory module beside CN12 with the orientation indicated below. Installing the Options 13
Résumé du contenu de la page N° 20
7. On the right side, push the bottom corner of the memory module until the clip comes up. Do not apply too much force. 8. Insert the other corner of the memory module until the other clip comes up. 9. Replace the casing of the printer and tighten the two retaining screws. 10. Turn the printer on when you finish installing the option. 14 Installing the Options
