Instruction d'utilisation Fujitsu FTP-642MCL302

Résumé du contenu de la page N° 1

24V DRIVE, HIGH SPEED LINE THERMAL PRINTER
4” MECHANISM, WITH OR WITHOUT CUTTER
FTP-642MCL001/002
FTP-642MCL301/302
n OVERVIEW
FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal
printer driven by 24 VDC, printing on 4-inch wide paper (112 mm/114
mm) .
This printer is compact and light weight, and the design allows easy
head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines

Résumé du contenu de la page N° 2

n DESIGNATION Item Part number *2 Standard FTP-642MCL001/002 Printer mechanism *3 With Auto cutter FTP-642MCL301/302 *4 FTP-622DCL001/011 Centronics Standard Interface board *5 FTP-622DSL001/011 Serial (RS-232C) *6 LSI(MCU) FTP-622CU101 FTP-622Y001 Thermal head cable FTP-622Y201 Parallel (centronics) Interface cable Cables FTP-622Y301 Serial (RS-232C) Interface cable FTP-622Y401 Power cable *2: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path). *3:

Résumé du contenu de la page N° 3

FTP-642MCL001/002/301/302 (Continued) Item Specifications Part number FTP-642MCL001/002 FTP-642MCL301/302 TM Interface Centronics (ESC/POS ), RS232C 24VDC ± 5%, Voltage 2 * Current : average ( ): Peak For head 1.61 (2.03) A (at 80 mm/s printing speed, 25% printing ratio) 1.17 (2.03) A (at 50 mm/s printing speed, 25% printing ratio) 1.08 (1.16) A (at 30 mm/s printing speed, 25% printing ratio) Power supply For motor 24VDC ± 5%, 1.0 A maximum

Résumé du contenu de la page N° 4

2—M 3 burring (FIXING HOLE FROM BOTTOM SIDE) 3-MOUNTING HOLE (M2) 2-POSITIONING HOLE FTP-642MCL001/002/301/302 n DIMENSIONS Mechanism PAPER INSERTION(MCL001) 20.1 HEAD UP LEVER(AT HEAD DOWN) CENTER OF PAPER PAPER INSERTION (MCL002) HEAD CONNECTOR 106.4(POSITIONING HOLE PITCH) + 1 – 65.7 71.8 Unit: mm (137.5) Mechanism with cutter 3—M 3(FIXING HOLE FROM UPPER SIDE) CENTER OF PAPER MCL301 PAPER INSERTION MCL302 PAPER INSERTION 93.0 106.4(POSITIONING H0LE) 73.0 147 ±1 (75.3) 71.8 (80.6) Note:

Résumé du contenu de la page N° 5

FTP-642MCL001/002/301/302 Interface board 130.8 120.7 116.8 87.6 19.1 5.1 5.1 CN2** CN5 CN3 4—ø3.6 CN10 CN11* CN13 5.1 5.1 43.2 86.4 105.4 120.7 *CN11 on FTP-622DCL011/111 & 622DSL011/012/112 only Unit: mm **CN2 on FTP- 622DSL only 5 88.9 78.7 39.4 5.15.1 CN1 CN8 39.4 5.1 5.1

Résumé du contenu de la page N° 6

FTP-642MCL001/002/301/302 n CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM 1. Thermal Head Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent Board side: PHR-16 (J.S.T.) or equivalent Nl o.St ignaCommen 1HVdPowerforhea 2HVdPowerforhea 3DGd NHeadgroun 4DGd NHeadgroun 51S1 TBPrintenablesignal 62S2 TBPrintenablesignal 73S3 TBPrintenablesignal 1 8*TH Temperaturedetection 94S4 TBPrintenablesignal 1T0Ll APrintdatalatchingsigna 151S5 TBPrintenablesignal 1D2Vc DPowerforlogi 1K3Ck LDatatransmissioncloc

Résumé du contenu de la page N° 7

FTP-642MCL001/002/301/302 4. Cutter Mech side : EHR-4 (J.S.T.) or equivalent Board side : B4B-EH (J.S.T.) or equivalent Nr oCe ableColoNam 1eW1 hitHomeposition 2eW2 hitHomeposition 3dR+ eMotorenergizingsignalM 4kB- lacMotorenergizingsignalM n FUNCTION ITEM ITEM 1. Test printing 8. Cutter trouble detection 2. Paper-out detection 9. Motor power save 3. Paper near end detection 10. Mark detection 4. Head-up detection 11. MCU trouble detection 5. Abnormal temperature detection of thermal hea