Résumé du contenu de la page N° 1
Monarch
Printers
®
✦ 9403
✦ 9825
✦ 9850
TC9800PM Rev. DD 3/02 ©1996 Monarch Marking Systems, Inc. All rights reserved.
Résumé du contenu de la page N° 2
Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Monarch has made every effort to provide complete and accurate information in this manual, Monarch shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. ©1998 Paxar Corporation.
Résumé du contenu de la page N° 3
TABLE OF CONTENTS GETTING STARTED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Creating an MPCLII Format Packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Daily Startup Proce
Résumé du contenu de la page N° 4
Defining the Print Control Packet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Defining the Monetary Formatting Packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Defining the Control Characters Packet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14 Resetting Control Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Defining the Communication Settings Packet . . . . . . . . . . . . . . . . . . . . . . . . . 2-
Résumé du contenu de la page N° 5
DEFINING FIELD OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Applying Field Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Combining Field Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Option 1 (Fixed Data) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Option 2 (Data Type Restrictions). . . . . . . . . .
Résumé du contenu de la page N° 6
Designing Bitmapped Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Special Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Using the Hex Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Using the Run Length Encoding Method . . . . . . . . . . . . . . . . . . . . . . 5-7 Determining How to Store the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 Using Fl
Résumé du contenu de la page N° 7
9850 Special Printing Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 9850 Serial Bar Code Printing Information . . . . . . . . . . . . . . . . . . . . . 6-8 Downloading Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 Sequential Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8 Batch Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 8
PRINTER OPTIMIZATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Adjusting the Print Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 Reducing Imaging Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 General Format Tips and Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5 SAMPLES . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 9
Monospaced Font Magnification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6 Using 203 DPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6 Using 300 DPI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6 Proportional Font Magnification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-10 Scalable/TrueType® Font Information. . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 10
Code Page 860 (MS-DOS Portuguese) . . . . . . . . . . . . . . . . . . . . . . . C-9 Code Page 1250 (Latin 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-9 Code Page 1251 (Cyrillic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10 Code Page 1252 (Latin 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-10 Code Page 1253 (Greek) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11 Code Page 1254 (Turkish). . . .
Résumé du contenu de la page N° 11
GETTING STARTED 1 Before you read this manual, review the printer information in the Operator’s Handbook or Operating Instructions. This manual provides the necessary information to design, write and print a Monarch® Printer Control Language II (MPCLII) format. The following printers support this type of format: 9403® (V. 1.0 or greater) 9825 (V. 1.0 or greater) 9850 (V. 1.0 or greater) If you are designing formats for a Monarch® 1464 or 1465 printer applicator, follow the 9850 print
Résumé du contenu de la page N° 12
Before You Begin 1. Connect the printer to the host. Refer to the Quick Reference or Operator’s Handbook for more information. 2. Load supplies in the printer. Refer to the Quick Reference or Operator’s Handbook for more information. 3. Turn on the printer. 4. Set the communication parameters and configure the printer. The communication parameters at the printer must match those at the host. See Chapter 2, "Configuring the Printer," for more information. 5. Design your format. See "Starting
Résumé du contenu de la page N° 13
2. Type the following constant text field: C,250,80,0,1,1,1,W,C,0,0,"MONARCH MARKING:",0 p 3. Type the following bar code field: B,1,12,F,110,115,1,2,120,5,L,0 p Type the following text field: 4. T,2,18,V,30,30,1,1,1,1,B,C,0,0,0 p } You have created a format packet for your MPCLII printer. Now, a batch packet must be created before you can print the format. 5. Type the following batch header, after the text field line: {B,25,N,1 p 6. Type the following bar code data: 1,"12345678901" p
Résumé du contenu de la page N° 14
10. Type COPY SAMPLE.FMT COM1. The following 2 inch by 2 inch label prints: {F,25,A,R,M,508,508,"Fmt 25" p C,250,80,0,1,2,1,W,C,0,0,"MONARCH MARKING" p B,1,12,F,110,115,1,2,120,5,L,0 p T,2,18,V,30,30,1,1,1,1,B,C,0,0 p } Sample Batch Packet {B,25,N,1 p 1,"12345678901" p 2,"DAYTON, OHIO" p } See "Starting with a Design" to design your format and Chapter 3, "Defining Fields" to create text, bar code, and line fields. Daily Startup Procedures You may want to design a checklist for operators t
Résumé du contenu de la page N° 15
Starting with a Design Before you create a format packet, you must design your label. There are several steps to designing a custom label: 1. Decide which fields should appear on your label. See "Determining Format Contents" for more information. 2. Determine your label size. Labels are available from Monarch in a wide variety of sizes. Your application and the amount of data you need to print determines the supply size. Contact your Account Manager or Technical Support for more information.
Résumé du contenu de la page N° 16
Determining Format Contents Before you lay out your format, you need to make a few decisions. For example: How large is your supply, which fonts do you want to use, do you want to include a bar code, and do you want to include graphics? Determining the Print Area The "bottom" is the edge that exits the printer first. The 0,0 point is at the bottom left corner of the label. For the 9403 printer, the print area begins 0.10 inches from the left edge of the supply. For the 9800 series printers,
Résumé du contenu de la page N° 17
If using the optional verifier, allow a minimum no-scan zone at the top of the label of 1.3" (33 mm) for speeds 6.0 ips or less; 1.8" (46 mm) for 8.0 ips; and 2.2" (56 mm) for 10.0 ips. Use the following formulas to convert inches to dots and metric: Dots = inches x 203 (or 300 dots per inch) Metric (1/10mm) = inches x 254 English (1/100 inch) = 100 x (dots/203) or (dots/300) Dots = Metric (1/10 mm) x 799/1000 (or 1181/1000) 300 dpi depends on your printer. Drawing Rough Sketches After you decid
Résumé du contenu de la page N° 18
Using Supply Layout Grids A supply layout grid contains measurement markers. These markers help you accurately position information on your label. Decide whether you want to design formats using English, Metric, or Dot measurements. Choose from the following grids:
English The English grid, shown to the right, is measured in 1/100 inches. Metric The Metric grid is measured i
Résumé du contenu de la page N° 19
Considering Field Types After you select a supply size, the next step in designing a format is to decide what information you want to print on the label. For example, you may want to print your company name, price of an item, and a bar code that combines information from other places. Everything you want to print falls into one of the following categories. Field Type Description Examples Text Contains letters, numbers, or item number, item description, symbols you want to print. department numb
Résumé du contenu de la page N° 20
Interchanging Packets You can use an MPCLII format that was designed for another MPCLII printer on a 9800 series printer. However, the format may appear smaller (fields will be shorter), because most of the 9800 series printers use a 203 dpi printhead. The 9850 printer has an optional 300 dpi printhead. Using the Format Worksheet The Format Worksheet is divided into sections that list the field types. Each section has boxes to fill in with parameters that define your format. A format workshe
