Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instructions marked with this symbol may cause personal injury or even fatality. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property. | Power Related | Installation Related | Cleaning and Use Related | [The images here are for reference only, and are not applic
Résumé du contenu de la page N° 3
Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it. There is a danger of fire. Unplug the power plug before cleaning the product. There is a danger of electric shock or fire. | Power Related | Installation Related | Cleaning and Use Related | TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. There is a danger of fire. When installing the product in
Résumé du contenu de la page N° 4
If the product falls it may harm children. Install on a flat and stable location as the front part is heavy. In case of thunder/lightning, disconnect the power cord from the wall outlet. There is a danger of electric shock or fire. Make sure the product's vents are not blocked by a table cloth or curtain. An increase in the internal temperature may cause a fire. Place the product on the ground carefully. Doing so may cause damage or injury. Do not drop the product w
Résumé du contenu de la page N° 5
There is a danger of fire or explosion. Do not place containers with water, vases, drinks, chemicals, s mall metal parts or heavy objects on the product. If water enters the product, it may cause electric shock, or fi re and when heavy objects fall, they may cause injury. Do not let children place objects such as toys or cookies on th e product. If a child tries to reach for any of these objects, the product may fall and cause harm. Do not look directly at the light of the
Résumé du contenu de la page N° 6
If the product is dropped or the casing is damaged, turn the pr oduct off and unplug the power cord. This may cause electric shock or fire. Contact a Service Center. Use only specified standard batteries. Do not use new and used batteries together. Incorrect polarity may cause a battery to break or leak and cou ld lead to fire, injury, or contamination (damage). Make sure to place your remote control on a table or desk. If you step on the remote control, you may fall and hur
Résumé du contenu de la page N° 7
| Product Features | Product Views | Remote Control | Product Specifications | An optical engine adopting new LCD technology - 1024 x 768 panel has been adapted. - Utilizing a 3P-LCD panel. - Provides a bright screen of 3000 lumen. - Compact size, lightweight, and good portability Minimized fan noise - Minimizes the noise generated by the product’s fan by optimizing the internal air flow and the fan installation structure. Various input terminals
Résumé du contenu de la page N° 8
1. Indicators 5. POWER( ) Button - STAND BY (Blue LED) Used to turn the projector on or off. - LAMP (Blue LED) - TEMP (Red LED) 6. Lens ※ Refer to the LED Indications. 7. Remote Control Signal Receiver 2. VOL - / + & Select and Move Button Adjusts the volume. 8. Focus Ring Use this button to move to or select an item Used for Focus Adjustment. within a menu. 9. Zoom Knob 3. MENU Button Used to enlarge or reduce image size. Use this button to enter or
Résumé du contenu de la page N° 9
Remote Control/ 1 Batteries (CR2025) Power Cable Cleaning Cloth (Not available in all locations) D-Sub Cable LED Indications ●:Light is On ◐:Light is Blinking ○:Light is Off STAND LAMP TEMP Information BY If you press the POWER button on the remote control or projector, the screen ●○ ○ appears within 30 seconds. ● ● ○ The projector is in normal operating condition. This state appears when the projector is preparing an operation after the POWER
Résumé du contenu de la page N° 10
cover is not open both the video and audio are turned off automatically. Action 3 completely. If this status persists for ten minutes, the projector is turne d off automatically. If the internal temperature of the projector has increased beyo nd the maintenance limit, it is changed to Cooling mode before it is turned This indicates that it has off automatically. changed to Cooling mode, * Cooling mode: The status that the fan speed has increased and the because the internal lamp of the p
Résumé du contenu de la page N° 11
2. AUDIO OUT port 8. [AV IN] S-VIDEO Input port 3. HDMI/DVI IN Input port 9. PC IN 1,2 Input port 4. PC 1/DVI AUDIO IN Input port 10.[PC IN2] AUDIO Input port 5. RS-232C port (For service input terminals) 11.Remote Control Signal Receiver 6. [AV IN] R-AUDIO-L Input port 12.POWER Input port | Product Features | Product Views | Remote Control | Product Specifications | 1. POWER ( ) Button 2. AUTO Button 3. MENU ( ) Button 4. Move (▲
Résumé du contenu de la page N° 12
6. INSTALL Used to flip or reverse the projected image. 7. BLANK This is used to turn off the video and audio temporarily. It is released when any button other than the POWER button is p ressed. 8. P.SIZE Used to adjust the size of picture screen. 9. QUICK This is used when quickly selecting the last used menu. 10. MUTE ( ) This is used to temporarily mute the sound. To hear sound again, press the MUTE button again or press the - VOL + button. 11. RETURN ( ) Re
Résumé du contenu de la page N° 13
Power 220W (Normal : 200W, Eco : 152W ) Consumption Lamp Life Time 2,000 Hours (Eco : 2,500 Hours ) D-Sub 15p x 2 Analog RGB, analog YPbPr HDMI Digital RGB, digital YCbCr Input Terminal Mini DIN x 1 S-Video RCA x 1 Composite video Speaker 3W x 2 (Stereo) Power Max 300 W Consumption Power Voltage 100~240V AC, 50/60Hz Noise Eco : 30dB, Normal : 32dB, Bright : 35dB 291(W) x 289(D) x 127(H) Dimensions 11.5 inches(W) x 11.4 inches(D) x 5 inches(H) Weight 3. Kg / 8. lb Temperature
Résumé du contenu de la page N° 14
VESA 1280 x 720 70Hz 52.500 70.000 89.040 VESA 1280 x 720 72Hz 54.072 72.000 91.706 VESA 1280 x 720 75Hz 56.456 74.777 95.750 VESA 1280 x 768 60Hz 47.776 59.870 79.500 VESA 1280 x 768 75Hz 60.289 74.893 102.250 VESA 1280 x 800 60Hz 49.702 59.810 83.500 VESA 1280 x 800 75Hz 62.795 74.934 106.500 VESA 1280 x 960 60Hz 60.000 60.000 108.000 VESA 1280 x 960 70Hz 69.930 70.000 120.839 VESA 1280 x 960 72Hz 72.072 72.000 124.540 VESA 1280 x 960 75Hz 75.231 74.857 130.000 VESA 1280 x 1024 60Hz
Résumé du contenu de la page N° 15
Résumé du contenu de la page N° 16
| Basic Settings | Connecting the Power | Connecting an External Device | Installing the Projector Install the projector so that the beam from the projector is p erpendicular to the screen. Place the projector so that the lens is at the center of the sc reen. If the screen is not vertically installed, the picture on the screen may not be a rectangle. Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be disp
Résumé du contenu de la page N° 17
You can adjust the size of image within zoom range by manipulat ing the Zoom Knob. Focus the picture on the screen using the Focus Ring. If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection Distance), the focus cannot be adjusted correctly. Leveling with Adjustable Feet For level placing of the projector, adjust the Adjustable Feet of the projector. The projector can be adjusted to a height of up to 3
Résumé du contenu de la page N° 18
260 5283.2 3962.4 9106 7587 660 270 5486.4 4114.8 9457 7880 686 280 5689.6 4267.2 9809 8173 711 290 5892.8 4419.6 10160 8466 737 300 6096.0 4572.0 10512 8759 762 This projector is designed to show images optimally on a 80 ~ 1 20 inch sized screen. A. Screen Z: Throw Distance Y': Distance from Lens Center to Image Bottom Setting up the PC Environment - Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Wind
Résumé du contenu de la page N° 19
4. Click on [Monitor] tab and set the by referring to described in the Supported Resolution/Size Modes table. Set up both the vertical and horizontal frequency instead of . 5. Click the [OK] button to close the window, and click the [OK] button of the window to close the window. The computer may restart automatically. 6. Shut down the PC and connect to the projector. Process might vary d
Résumé du contenu de la page N° 20
Connecting a PC using a D-Sub cable Check that your PC and projector are turned off. Connect the [PC IN (1 or 2)] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. - For the supported input signals, refer to "PC Timing(D-Sub/HDMI)". Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector to the Audio out terminal of your PC using an audio cable (Not supplied). Connecting a PC using a HDMI/DVI cable
