Résumé du contenu de la page N° 1
3-218-492-12 (1)
Video Projector
Operating Instructions
VPL-VW60
© 2007 Sony Corporation
Résumé du contenu de la page N° 2
Declaration of Conformity Trade Name: SONY WARNING Model No.: VPL-VW60 Responsible Party: Sony Electronics Inc. To reduce the risk of fire or electric Address: 16530 Via Esprillo, San Diego, CA shock, do not expose this apparatus 92127 U.S.A. to rain or moisture. Telephone Number: 858-942-2230 To avoid electrical shock, do not This device complies with Part 15 of the open the cabinet. Refer servicing to FCC Rules. Operation is subject to the qualified personnel only. following two condit
Résumé du contenu de la page N° 3
Disposal of Used Lamp Trademark Information This projector’s lamp contains mercury and “BRAVIA” and are trademarks of should be disposed of properly. Consult your Sony Corporation. local authorities regarding safe disposal. The material contained in this lamp are HDMI, the HDMI logo and High-Definition similar to those of a fluorescent lamp, so you Multimedia Interface are trademarks or should dispose of it in the same way. registered trademarks of HDMI Licensing LLC. For customers in the U
Résumé du contenu de la page N° 4
For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. Voor de klanten in Nederland Gooi de batterij niet weg maar lever deze in als klein chemisch Disposal of Old Electrical & afval (KCA). Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) The socket-outlet should be installed near the equipment and be easily accessible. This symbol on the product or on its packaging indicates that this
Résumé du contenu de la page N° 5
Table of Contents Precautions .........................................7 Projecting Projecting the Picture on the Location of Controls Screen .............................................. 27 Front/Right Side .................................8 Turning Off the Power ............... 28 Rear/Bottom .......................................9 Selecting the Wide Screen Mode .... 29 Remote Control ................................10 Selecting the Picture Viewing Mode ....................................
Résumé du contenu de la page N° 6
Others About the HDMI Control ................. 53 Troubleshooting ...............................54 Warning Indicators ..................... 56 Message Lists ............................. 57 Replacing the Lamp and the Air Filter and cleaning the Ventilation holes (intake) .............................................58 Cleaning the Air Filter ..................... 61 Specifications ...................................62 Preset Signals ............................. 64 Input Signals and Adjustab
Résumé du contenu de la page N° 7
Precautions On safety � Check that the operating voltage of your unit is identical with the voltage of your local power supply. � Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. � Unplug the unit from the wall outlet if it is not to be used for several days. � To disconnect the cord, pull it out by the plug. Never pull the cord itself. � The wall outlet should be near the unit and easily a
Résumé du contenu de la page N° 8
Location of Controls Front/Right Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. LENS button (1 page 22) M/m/
Résumé du contenu de la page N° 9
Location of Controls Rear/Bottom Ventilation holes (intake) (1 page 13) Remote control detector (1 page 21) Ventilation holes (intake) (1 page 13) Ventilation holes (intake) (1 page 13) Ventilation holes (intake) (1 page 13) Ventilation holes (intake) (1 page 13) Lamp cover (1 page 58) Adjusters (1 page 24) Filter holder (1 page 59) Ventilation holes (intake) (1 page 13) Projector suspension support attaching hole (1 page 69) 9
Résumé du contenu de la page N° 10
Remote Control Infrared transmitter ?/1 (ON/STANDBY) switch (1 page 22) LIGHT button Illuminates the buttons on COLOR TEMP button the remote control. (1 page 32) INPUT button BLACK LEVEL button (1 page 27) (1 page 32) COLOR SPACE button (1 page 32) LENS button (1 page 22) GAMMA CORRECTION ADVANCED IRIS button button (1 page 32) (1 page 32) RESET button (1 page 36) M/m/
Résumé du contenu de la page N° 11
Connections and Preparations Connections and Preparations This section describes how to install the projector and screen, how to connect the equipment from which you want to project the picture, etc. Unpacking Check the carton to make sure it contains the following items: � Remote control (1) and � Lens cap (1) Size AA (R6) batteries (2) When you have purchased the projector, the lens cap is put onto the lens. Remove this lens cap when you use the projector. � Operating Instructions (this ma
Résumé du contenu de la page N° 12
Step 1: Installing the Projector The projector displays pictures output from Installing the projector in such a location a VCR or other device. may cause a malfunction of the unit due to The lens shift allows you to have broader moisture condensation or rise in options for placing the projector and temperature. viewing pictures easily. Near a heat or smoke sensor Before Setting Up the Projector Unsuitable installation Do not place the projector in the following situations, which may cause
Résumé du contenu de la page N° 13
Connections and Preparations Improper use Do not do any of the following while using the projector. Blocking the ventilation holes. 15° or more Ventilation holes Avoid using the projector tilted at an angle (intake) of more than 15 degrees. Do not install the projector anywhere other than on a level surface or on the ceiling. Failing to set this mode when using the projector at high altitudes may result in Ventilation holes uneven color uniformity and reducing the (exhaust) reliability
Résumé du contenu de la page N° 14
Positioning the Projector and a screen The installation distance between the projector and a screen varies depending on the size of the screen. 1 Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector with the center of the lens within the areas indicated in the gray areas in the illustration. Use the values a, b and c in the table on page 15 as a guide. Ceiling installation Center of the screen c c Center of projec
Résumé du contenu de la page N° 15
Connections and Preparations When using the 16:9 aspect ratio screen Unit: mm (inches) Screen 40 60 80 100 120 150 180 200 250 300 size (inches) (mm) 1016 1524 2032 2540 3048 3810 4572 5080 6350 7620 a 1212 1842 2472 3102 3732 4677 5622 6252 7827 9402 3 5 3 1 1 3 1 1 1 (minimum) (47 /4) (72 /8) (97 /8) (122 /4) (147) (184 /4) (221 /8) (246 /4) (308 /4) (370 /4) b 2105 3181 4257 5333 6409 8023 9637 10713 13403 16093 7 1 5 3 7 1 7 5 5 (maximum) (82 /8) (125 /4) (167 /8) (210) (252 /8) (315 /8)
Résumé du contenu de la page N° 16
2 Position the projector so that the lens is parallel to the screen. Top view Screen 3 Project an image on the screen and adjust the picture so that it fits the screen. (1 page 21) To project an image, connect video equipment to the projector. (1 page 17) Note When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the projector or the zooming magnifications. This is not a malfunction of the projector. 16
Résumé du contenu de la page N° 17
Connections and Preparations Step 2: Connecting the Projector When making connections, be sure to do the following: � Turn off all equipment before making any connections. � Use the proper cables for each connection. � Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable itself. � Refer to the operating instructions of the connected equipment. Connecting to a
Résumé du contenu de la page N° 18
To connect to a DVD player/recorder or Blu-ray Disc player equipped with HDMI output You can enjoy better picture quality by connecting a DVD player/recorder or Blu-ray Disc player equipped with HDMI output to the HDMI input of the projector. Moreover, if you have an HDMI control compatible equipment, you can operate the projector synchronizing with the HDMI control compatible equipment. For details, see the Function menu (1 page 48) and “About the HDMI Control” (1 page 53). AV amplifier S
Résumé du contenu de la page N° 19
Connections and Preparations To connect to a VCR equipped with the S video connector or video connector You can connect a DVD player/recorder, hard disk video recorder, VCR or laser disk player, which is not equipped with component video connectors. See also the instruction manual of each equipment. Right side of the projector AV amplifier Speakers Video equipment to S video or video output S video or video cable (not supplied) : Video signal flow Tip If you do not know to which connector yo
Résumé du contenu de la page N° 20
Connecting to a Computer Right side of the projector Computer to monitor output HD-Dsub15 pin cable (not supplied) or HDMI cable (not supplied) : Video signal flow When using an optional HDMI cable, be sure to use a cable that has acquired the HDMI logo. Tip Set “Input-A Signal Sel.” in the Setup menu to “Auto” or “Computer.” If the input signal does not appear properly, set it to “Computer.” (1 page 47, 57) Notes � When connecting an HDMI cable, make sure the V mark on the upper part of th
