Résumé du contenu de la page N° 1
E
DATA PROJECTOR
XJ-S43W
User’s Guide
Be sure to read the precautions in the
separate User’s Guide (Basic Operation). For
details about setting up the projector and lamp
replacement, see the User’s Guide (Basic
Operation).
Be sure to keep all user documentation handy
for future reference.
1
Résumé du contenu de la page N° 2
DLP is a registered trademark of Texas Instruments of the United States. Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. XGA is a registered trademark of IBM Corporation of the United States. Other company and product names may be registered product names or trademar
Résumé du contenu de la page N° 3
Contents About this manual... .......................................................................................... 5 Projector Overview ......................................................... 6 Projector Features and Main Functions ............................................................ 6 Projector Keys and Remote Controller Keys..................................................... 7 Operation During Projection .......................................... 8 Image Operations During Pro
Résumé du contenu de la page N° 4
Screen Settings Main Menu....................................................................................... 27 Input Settings Main Menu .......................................................................................... 29 Option Settings 1 Main Menu..................................................................................... 30 Option Settings 2 Main Menu..................................................................................... 32 Operational Info Main Menu.......
Résumé du contenu de la page N° 5
About this manual... This manual assumes that you are already familiar with the contents of the separate “User’s Guide (Basic Operation)”. All of the operations in this manual are explained using the remote controller that comes with the projector. The following key operations can also be performed on the projector instead of the remote controller: [MENU], [ ], [ ], [ ], [ ], [ENTER], [ESC], [ ], [INPUT], [AUTO], [ZOOM +], [ZOOM –], [FOCUS ], [FOCUS ]. To perform this remote Use this pr
Résumé du contenu de la page N° 6
Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. Projector Features and Main Functions Slim and compact: B5 file size and a mere 32 mm slim (at thinnest part). Compact enough to install or use just about anywhere. WXGA resolution: This is the first of the CASIO Super Slim projector series to support WXGA (1280 × 800) resolution for optimal viewing of content formatted for today’s widescreen displ
Résumé du contenu de la page N° 7
Projector Keys and Remote Controller Keys Projector Keys and Indicator Panel TEMP indicator [FOCUS] key LAMP indicator [Enter] key* POWER/STANDBY indicator [MENU] key [P] (Power) key [ESC] key [INPUT] key Cursor keys [AUTO] key [ZOOM] key * The projector’s enter key does not have anything printed on it. When you see [ENTER] in this manual, it means you should press the projector’s enter key or the [ENTER] key of the remote controller. Remote Controller Keys [INPUT] key Remote control signal em
Résumé du contenu de la page N° 8
Operation During Projection This section explains the various types of operations you can perform while the projector is projecting an image. Image Operations During Projection You can perform the following operations while projecting an image. Image brightness adjustment Color mode selection Image zooming Momentary cut off of the input source image and projection of a black or blue screen, or a logo Image freeze Pointer display in the projected image Aspect ratio switching Adjusting Im
Résumé du contenu de la page N° 9
Selecting the Color Mode You can select from among five different color mode settings to optimize the projected image in accordance with image contents and projection conditions. To change the color mode Press the [COLOR MODE] key. 1 This displays the color mode selection window. The currently selected color mode is the one whose button is selected (filled in). Use the [ ] and [ ] keys to move the highlighting to the color mode you want 2 to select, and then press the [ENTER] key. This will
Résumé du contenu de la page N° 10
Momentarily Cutting Off the Input Source Image Press the [BLANK] key. 1 This temporarily cuts off the image from the input source and projects a black screen in its place. To resume projection of the image from the input source, press the [BLANK] key 2 (or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 28. Freezing an Image Pressing the [FREEZE] key freezes the projected image.
Résumé du contenu de la page N° 11
Displaying a Pointer in the Projected Image You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to zer
Résumé du contenu de la page N° 12
Changing the Aspect Ratio of the Projected Image Use the [ASPECT] key to change the aspect ratio of the projected image. When the input source Each press of [ASPECT] cycles through these settings: is this: VIDEO, component, or Normal 16:9 Letter Box HDMI (DTV) When the input source is either a component signal or an HDMI (DTV) signal with an aspect ratio of 16:9, the projection aspect ratio also will become 16:9 automatically. Pressing the [ASPECT] key will not change it. RGB or HDMI (PC)
Résumé du contenu de la page N° 13
Adjusting the Volume Level You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker. To adjust the volume level On the remote controller, press the [VOLUME] key. 1 This causes the [Volume] screen to appear on the projected image. Press the [ ] key to increase the volume, or the [ ] key to lower the volume. 2 After the setting is the way you want, press the [ESC] key. 3 This causes the [Volume] screen to disappear. Note You als
Résumé du contenu de la page N° 14
Using the [FUNC] Key Pressing the [FUNC] key displays the menu shown below. You can use this menu to perform the operations described below. Adjust image brightness Highlight “Brightness” and then press the [ENTER] key. This performs the same operation as pressing the [BRIGHT] key ( key) described on page 8. Turn the Eco Mode on or off Highlight “Eco Mode” and then press the [ENTER] key. This performs the same operation as pressing the [ECO] key ( key) described on page 13. Select the
Résumé du contenu de la page N° 15
Configuring Advanced Projector Settings Your projector has a setup menu that you can use to configure advanced settings. Basic Setup Menu Operations Displaying the Setup Menu Pressing the [MENU] key displays the menu shown below in the center of the projection screen. Main menu The main menu includes nine main menu items. The currently selected main menu item is the one that is highlighted. Sub-menu The sub-menu shows each individual setting under each main menu item, and its current settin
Résumé du contenu de la page N° 16
Basic Setup Menu Example The procedure below shows how to configure the following three settings: Image Adjustment 1 Contrast Image Adjustment 1 Color Mode Option Settings 1 Eco Mode Note Certain settings on the setup menu cannot be changed while there is no input signal to the projector. Because of this, you should configure setup menu settings after selecting an input source and starting projection. This example covers basic steps only. For more detailed information, see “Setup Me
Résumé du contenu de la page N° 17
To configure the “Image Adjustment 1 Color Mode” setting Press the [ ] key once to select “Color Mode”. 5 Press the [ENTER] key. 6 This displays the color mode menu. Use the [ ] and [ ] keys to select the color mode you want, and then press 7 the [ENTER] key. After selecting the color mode you want, press the [ESC] key. 8 To configure the “Option Settings 1 Eco Mode” setting Press the [ESC] key. 9 Press the [ ] key five times to select “Option Settings 1”. 10 Press the [ENTER] key. 11 Press
Résumé du contenu de la page N° 18
Direct Power On You can configure the projector so it powers up automatically as soon as you plug it into a power source. With this “Direct Power On” feature, you do not even need to press the [P] (power) key. To enable Direct Power On, display the Setup Menu, and then change the “Direct Power On” setting to “On”. Important! When you have Direct Power On enabled, do not leave the projector plugged into an electrical outlet while it is turned off. If you do, there is the chance that it (and
Résumé du contenu de la page N° 19
Password Protecting the Projector The password feature lets you keep unauthorized individuals from using the projector. You can specify whether password input is required whenever you turn on the projector, and you can specify and change the password as required. Use the setup menu “Option Settings 1 Power On Password” setting to configure power on password settings. Inputting a Password The password of your projector is not really a “word” made up of letters, but rather a sequence of remot
Résumé du contenu de la page N° 20
Keep a written record of your password! You will not be able to use the projector if you forget its password. We strongly suggest that you keep a written or other type of record of the password so you can look it up when necessary. To change the password Press the [MENU] key to display the setup menu. 1 Use the [ ] key to select “Option Settings 1”, and then press the [ENTER] key. 2 Use the [ ] key to select “Power On Password”, and then press the [ENTER] 3 key. This will display a dialog bo
