Résumé du contenu de la page N° 1
INSTALLATION, USE & CARE MANUAL
36” FREESTANDING DUAL FUEL RANGES
Models X365PIRX [M3W0PTU(4,6)X(2,5)D]
Models X365PIRBI [M3W0PTU(4,6)W(2,5)D]
Models X365PIRCR [M3W0PTU(4,6)D(2,5)D]
Models X365PIRGI [M3W0PTU(4,6)I(2,5)D]
Models X365PIRRO [M3W0PTU(4,6)R(2,5)D]
Models X365PIRVI [M3W0PTU(4,6)L(2,5)D]
Models X365PIRVE [M3W0PTU(4,6)V(2,5)D]
Models X365PIRBL [M3W0PTU(4,6)U(2,5)D]
Models X365PIRNE [M3W0PTU(4,6)N(2,5)D]
Models X366PIRX [M3Y0PTU(4,6)X(2,5)D]
Models X366PIRBI
Résumé du contenu de la page N° 2
From the desk of the President Dear new owner of a Bertazzoni product, I want to thank you for choosing one of our beautiful PRO ranges. We know that you have many brands and products to choose from and we are thrilled that you have decided to take one of your products into your home. We take as much pride in making our ranges as we hope you will in owning them. My family started manufacturing cooking appliances in 1882. Each of BERTAZZONI SpA our products is a blend of Itali
Résumé du contenu de la page N° 3
TABLE OF CONTENTS WARRANTY AND SERVICE........................................................................................................................................ 4 CUSTOMER SERVICE.......................................................................................................................................................5 REPLACEMENT PARTS ...................................................................................................................................
Résumé du contenu de la page N° 4
SOUND BUZZER............................................................................................................................................................27 OVEN CONVECTION FAN..............................................................................................................................................27 BAKE ..............................................................................................................................................................
Résumé du contenu de la page N° 5
WARRANTY AND SERVICE All Bertazzoni products carry a 2 year parts and labour warranty. Service on all Bertazzoni products shall be carried out by factory ‐trained professionals only. For warranty service please contact Customer Service at the numbers indicated below. CUSTOMER SERVICE English/Spanish hotline (866) 905 ‐0010 French (800) 561 ‐7625 Fax (714) 428 ‐0040 Email BERTAZZONIHELP@SERVICEPOWER.COM Mailing address SERVICEPOWER 1503 South Coast drive Suite 320 Co
Résumé du contenu de la page N° 6
WARNING! IMPORTANT SAFETY INFORMATION Read this instruction booklet before installing PLEASE READ AND FOLLOW THESE IMPORTANT and using the appliance. INSTRUCTIONS FOR THE SAFETY OF YOUR HOME The manufacturer will not be responsible for AND OF THE PEOPLE LIVING IN IT. any damage to property or to persons caused by Save this Manual for local electrical inspector’s incorrect installation or improper use of the use. appliance. Read and save these instructions for future The manufactur
Résumé du contenu de la page N° 7
PRODUCT SPECIFICATIONS Dimensions (insert drawings front, side and back Weight Burner power Auxiliary 3400 BTU/h Semi ‐rapid 6100 BTU/h Rapid 10400 BTU/h Dual burner (inner) 2800 BTU/h Dual burner ( outer) 12000 BTU/h 7
Résumé du contenu de la page N° 8
WARNING! BEFORE INSTALLATION Do not use aerosol sprays in the vicinity of this This appliance shall only be installed by an appliance while it is in operation authorized professional. ROOM VENTILATION: An exhaust fan may be This appliance shall be installed in accordance used with the appliance; in each case it shall be with the manufacturer’s installation instructions. installed in conformity with the appropriate This appliance must be installed in accordance national and local
Résumé du contenu de la page N° 9
INSTALLING THE LEGS INSTALLING THE WORKTOP FRONTGUARD Bertazzoni ranges must be used only with the legs properly installed. To increase the clearance between the front edge of the worktop and the burners it is possible to Four height ‐adjustable legs are shipped with the install the worktop front guard shipped with the range in the polystyrene container situated over appliance. the appliance. To install the front guard, hold it with the pointed Before installing the legs, position
Résumé du contenu de la page N° 10
2 lateral screws from the bottom. INSTALLING THE BACKGUARD The back guard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The supplied back guard is a 2 ‐part assembly. The box also contains a set of metal screws for securing the back guard to the worktop. Disassemble the back guard and position the front part on the worktop. Align the screw holes with the corresponding holes at the back of the worktop. If the hol
Résumé du contenu de la page N° 11
INSTALLING THE ANTI ‐TIP Stability DEVICE INSTALLATION REQUIREMENTS The anti ‐tip bracket shipped with the range must be properly secured to the rear wall as shown in the picture below. ELECTRICAL The height of the bracket from the floor must be determined after the range legs have been A properly grounded and horizontally ‐mounted adjusted to the desired height and after the electrical receptacle Type NEMA 14 ‐50R should range has been levelled. be installed no higher than 3" (
Résumé du contenu de la page N° 12
EXHAUST HOOD INSTALLATION INSTALLATION ADJACENT TO KITCHEN This range will best perform when used with PRO CABINETS line Bertazzoni exhaust hoods. These hoods have This range may be installed directly adjacent to been designed to work in conjunction with the existing countertop high cabinets (36" or 91.5 cm Bertazzoni range and have the same finish for a from the floor). perfect look. For the best look, the worktop should be level For maximum performance, the height of the wit
Résumé du contenu de la page N° 13
‐ Connect the NEUTRAL receptacle terminal to ELECTRICAL CONNECTION the incoming NEUTRAL (WHITE) electrical The appliance shall be connected to a single supply wire phase electric line rated at 120/208Vac or ‐ Connect the GROUND receptacle terminal to 120/240Vac and 60Hz frequency. the incoming GROUND (GREEN) electrical supply wire Electric power rating: ‐ 120/208Vac: 5000 Watt or 24.3 A max. OPTION 2 - THREE-Wires connection: ‐ 120/240Vac: 6500 Watt or 27.8 A max. ‐ Connect
Résumé du contenu de la page N° 14
4) Loose strain relief by unscrewing the two strain relief's screws as in diagram. 5) Remove damaged supply cord set by taking off the 4 electrical connection screws (block L1, N, L2 and Ground screw, see diagram) 6) Insert the new supply cord set in the strain relief and lock it with two strain relief's screws in suitable position. 7) Fix well the ring terminals G, L1, N, L2 of the new supply cord set as shown in diagram with its 4 screws 8) Re ‐install the back enclo
Résumé du contenu de la page N° 15
WARNING! ELECTRICAL SHOCK HAZARD Disconnect electrical power at the circuit breaker box or fuse box before installing the appliance. Provide appropriate ground for the appliance. Use copper conductors only. Failure to follow these instructions could result in serious injury or death CAUTION Label all wires prior to disconnecting when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing
Résumé du contenu de la page N° 16
WIRING DIAGRAM 16
Résumé du contenu de la page N° 17
MANUAL SHUT ‐OFF VALVE GAS CONNECTION THIS VALVE IS NOT SHIPPED WITH THE All gas connections must comply with national APPLIANCE AND MUST BE SUPPLIED BY THE and local codes. The gas supply line (service) INSTALLER. must be the same size or greater than the inlet The manual shut ‐off valve must be installed in line of the appliance. This range uses a 1/2" NPT the gas service line between the gas hook ‐up on inlet (see drawing below for details of gas the wall and the appliance inlet,
Résumé du contenu de la page N° 18
GAS CONVERSION PRESSURE REGULATOR WARNING! Since service pressure may fluctuate with local Before carrying out this operation, disconnect demand, every gas cooking appliance must be the appliance from gas and electricity. equipped with a pressure regulator on the Gas conversion shall be conducted by a factory ‐ incoming service line for safe and efficient trained professional. operation. Call the customer service hotline to identify a The pressure regulator shipped with the fact
Résumé du contenu de la page N° 19
Consult the table on page 20 for matching nozzles to burners. STEP 2: SURFACE BURNERS To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm {socket wrench). Replace nozzles using the conversion set supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body. STEP 3: MINIMUM FLAME ADJUSTMENT WARNING! These
Résumé du contenu de la page N° 20
GAS BURNERS DATA TABLES Models X365PIRX [M3W0PTU(4,6)X(2,5)D] Models X365PIRBI [M3W0PTU(4,6)W(2,5)D] Models X365PIRCR [M3W0PTU(4,6)D(2,5)D] Models X365PIRGI [M3W0PTU(4,6)I(2,5)D] Models X365PIRRO [M3W0PTU(4,6)R(2,5)D] Models X365PIRVI [M3W0PTU(4,6)L(2,5)D] Models X365PIRVE [M3W0PTU(4,6)V(2,5)D] Models X365PIRBL [M3W0PTU(4,6)U(2,5)D] Models X365PIRNE [M3W0PTU(4,6)N(2,5)D] Burner Position Injector Gas Pressure Max Rate Min Rate By ‐pass diam. [mm.] Type [i.w.c.] [BTU/h]
