Résumé du contenu de la page N° 1
P-660RU-Tx v2
ADSL2+ Ethernet / USB Router
Quick Start Guide
Version 3.40
Edition 4
10/2008
Résumé du contenu de la page N° 2
P-660RU-Tx v2 Quick Start Guide Overview The P-660RU-Tx v2 is an ADSL router with both USB and Ethernet ports. See your User’s Guide for background information on all features. This Quick Start Guide shows you how to: • Connect the hardware. • Set up your Internet connection. Be sure you have your Internet connection information from your Internet Service Provider (ISP) to set up the connection (See section 2). How to use the included CD If you prefer to see a multi-media animation of how to
Résumé du contenu de la page N° 3
P-660RU-Tx v2 Quick Start Guide 1 Hardware Connections There are two ways to connect your computer or computer network to the P-660RU-Tx v2: Option A: Connect via Ethernet. See page 2. Option B: Connect via USB (you will need to install the USB driver). See page 4. Option A: Connect via Ethernet 1ETHERNET: Use the yellow Ethernet cable to connect a computer to the ETHERNET port for initial configuration and/or Internet access. 2
Résumé du contenu de la page N° 4
P-660RU-Tx v2 Quick Start Guide 2DSL: Use the gray telephone wire to connect your P- 660RU-Tx v2’s DSL port to a telephone jack (or to a splitter, if one is already installed). 3POWER: Use the power adaptor provided with your P- 660RU-Tx v2 to connect an appropriate power source to the POWER socket. Make sure the power source is on. 4 Push in the POWER button. 5 Look at the lights on the front panel. • The light blinks while your P-660RU-Tx v2 starts up and stays on once it is ready. •The
Résumé du contenu de la page N° 5
P-660RU-Tx v2 Quick Start Guide If any of these lights are not on, check your connections and inspect your cables for damage. If the lights are still off, contact your local vendor. Option B: Connect via USB 4
Résumé du contenu de la page N° 6
P-660RU-Tx v2 Quick Start Guide Do NOT connect the same computer to both the USB and ETHERNET ports on the P-660RU-Tx v2. 1USB: Connect the provided USB cable to the P-660RU-Tx v2’s USB port. 2DSL: Use the gray telephone wire to connect your P- 660RU-Tx v2’s DSL port to a telephone jack (or to a splitter, if one is already installed). 3POWER: Use the power adaptor provided with your P- 660RU-Tx v2 to connect an appropriate power source to the POWER socket. Make sure the power source is
Résumé du contenu de la page N° 7
P-660RU-Tx v2 Quick Start Guide • The light turns on if the USB port is properly connected, and blinks when there is traffic. If any of these lights are not on, check your connections and inspect your cables for damage. If the lights are still off, contact your local vendor. Install the USB Software If you want to connect to the Internet through the P-660RU-Tx v2's USB port, install the USB driver before you connect the P-660RU-Tx v2 to the USB port. Follow the steps for your operating
Résumé du contenu de la page N° 8
P-660RU-Tx v2 Quick Start Guide 3 Click the Setup icon on the main screen. 4 Select the Windows version of your computer. 5 An install warning may appear in the Windows Vista OS. Click Allow to continue. 6 Click Next in the Welcome screen to begin the USB Installation Wizard. Follow the installation prompts. You may need to restart your computer at the end of the installation. 7
Résumé du contenu de la page N° 9
P-660RU-Tx v2 Quick Start Guide Macintosh Computer System Requirements • Macintosh operating system versions 10.1, 10.2 and 10.3. • An available USB port Procedures 1 Save your work and close all applications. 2 Insert the included CD. A CD’s icon automatically displays on the desktop. 3 Double-click the CD's icon. 4 Double-click the MAC version of your computer. 8
Résumé du contenu de la page N° 10
P-660RU-Tx v2 Quick Start Guide 5 Double-click one of the following. If you selected MAC10.1, double click the P-660RU-T icon. If you selected MAC 10.2_10.3, double click the P-660RU- Tx.dmg icon. 9
Résumé du contenu de la page N° 11
P-660RU-Tx v2 Quick Start Guide 6 Click Continue in the Welcome screen to begin the USB installation. Follow the installation prompts. You may need to restart your computer at the end of the installation. 2 Connection Setup: Wizard Use this section to set up your Internet connection via the Web Configurator Wizard. You should have the information from your Internet Service Provider (ISP). 1 Open your browser and enter the P-660RU-Tx v2's IP address (default 192.168.1.1) as the URL. If your
Résumé du contenu de la page N° 12
P-660RU-Tx v2 Quick Start Guide 2 Enter the admin password admin (default). Click Login. 3 Select Go to Wizard setup. Click Apply. 4 Click INTERNET SETUP. 11
Résumé du contenu de la page N° 13
P-660RU-Tx v2 Quick Start Guide 5 Follow the instructions in the wizard. Enter your Internet connection information exactly as provided by your ISP. If you do not see the following screen, go to section 3. 3 Connection Setup: Manual Use this section to set up your Internet connection manually if you do not see the ISP Parameters for Internet Access screen when you run the wizard (see section 2). 1 Follow steps 1 to 3 in section 2 in order to log in to the Web Configurator. 12
Résumé du contenu de la page N° 14
P-660RU-Tx v2 Quick Start Guide 2 Select Go to Advanced setup. Click Apply. 3 The Status screen appears. Click Network > WAN in the navigation panel on the left of the screen. 4 The Internet Connection screen appears. Enter the information exactly as provided by your ISP and click Apply. 13
Résumé du contenu de la page N° 15
P-660RU-Tx v2 Quick Start Guide The fields available in this screen depend on the Mode you select. 5 If you still cannot access the Internet, see Troubleshooting and/or contact your Internet Service Provider (ISP) for assistance. 14
Résumé du contenu de la page N° 16
P-660RU-Tx v2 Quick Start Guide Troubleshooting 1 If you want to verify your USB installation, • Check the status of the P-660RU-Tx v2 in the Device Man- ager window. Click Start > Settings > Control Panel > Sys- tem > Hardware and then click Device Manager. (Steps may vary depending on the version of Windows.) • Verify the status of the P-660RU-Tx v2 under Network Adapter. Check that there is no question mark on the device icon for the P-660RU-Tx v2. 2 If you cannot access the Web Configura
Résumé du contenu de la page N° 17
P-660RU-Tx v2 Quick Start Guide B) If your ISP gave you Internet connection information, ensure you enter it correctly. For example, if your account has a user name and password, make sure you type it correctly. In addition, if you are not sure which encapsulation your ISP uses, contact your ISP. If your ISP did not give you Internet connection information, follow the steps in section 2. C) If you are using a new Internet account, contact your ISP to make sure it is active. D) If you sti
Résumé du contenu de la page N° 18
P-660RU-Tx v2 Quick Start Guide • Click the wizard icon ( ). Run the Internet Setup wizard again. Check whether you can access the Inter- net. If you still cannot access the Internet, take the following steps: • If you are using Bridge mode (check Mode in the Net- work > WAN > Internet Connection screen) click NAT > General and ensure Active Network Address Trans- lation (NAT) is not selected. Click LAN > DHCP Setup and ensure that DHCP is set to None. Your ISP gives your computer an IP ad
