Résumé du contenu de la page N° 1
DSB-A100F
Instructions for use
GB
MF68-00312A REV. 1.0
DIGITAL SATELLITE RECEIVER DIGITAL SATELLITE RECEIVER
Résumé du contenu de la page N° 2
SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. MAINS SUPPLY: AC 100-240V~, 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS: Keep liquids away from the STB. CLEANING: Before cleaning, disconnect the STB from the wall socket. Use a cloth lightly dampened with water(no solvents) to clean the exte
Résumé du contenu de la page N° 3
CONTENT GENERAL FEATURES Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. USER SECTION General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4000 PROGRAMMABLE CHANNELS SOFTWARE DOWNLOAD VIA SATELLITE & PC(Secured) Connecting Your “STB”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ADVANCED ELECTRONIC PROGRAM GUIDE Description . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 4
CONNECTING YOUR "STB" CONNECTING YOUR “STB” Connecting Figure 1. LOCATION OF THE RECEIVER Your “STB” should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver. The location should be safely accessible by the cable from your antenna
Résumé du contenu de la page N° 5
DESCRIPTION DESCRIPTION Front Panel Rear Panel 1 2345 6 1 25 3 4 67 1. This key is for turning the receiver on and Standby. 1. AC MAINS This is to plug in the AC mains power cord. The input AC voltage range is 100V to 240V~, 50Hz/60Hz supply. 2. OK This key is for entering and confirming any data to the receiver in the menu system. This key is for selecting the item. Press while viewing 2. RS 232 DATA PORT This is for connecting your receiver to a computer for reading TV and a list of c
Résumé du contenu de la page N° 6
DESCRIPTION DESCRIPTION Remote Control Unit 1. POWER 10. ALT(YELLOW) This key is for selecting the soundtrack list for the current service. This is for switching the receiver This key functions same as the YELLOW key on the menu. Press it once and sound track appears. ON/STANDBY mode. Press it twice and video track appears. 2. 0-9 NUMERICAL keys The sound and video track services are not provided for every These keys are to enter numeric values and channel and depend on the conditions the ope
Résumé du contenu de la page N° 7
BASIC FUNCTIONS BASIC FUNCTIONS 3. Select Soundtrack 1. Display Screen ● Press YELLOW(ALT) key to see the soundtrack list. Before you can view the television program, you must perform the installation. ● Press / and OK key to select one. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: Channel Number 4. Select Videotrack ● Press YELLOW(ALT) key twice to see the vid
Résumé du contenu de la page N° 8
BASIC FUNCTIONS BASIC FUNCTIONS 6.1 Service Favorites 7. Program Information ● Press the GREEN(TEXT) key on the control unit to select the EPG-Electronic Program Guide Favorites list. The electronic program guide gives you information for the channels. ● Press the GREEN(TEXT) key to switch between favorite list and channel list. N No ot te e : 1. This service depends on service provider. ● Use the / , PG+/PG- keys to select a favorite group or a 2. After receiver recognized the GMT-t
Résumé du contenu de la page N° 9
BASIC FUNCTIONS BASIC FUNCTIONS 9. Teletext OSD 12. Near Video on Demand (NVOD) When the current broadcasting program provides Teletext, press If the changed channel is a NVOD service channel, the GREEN(TEXT) key twice to see the current language list for [N] is displayed at the right corner on the banner. In this case, Teletext in order to get teletext in OSD regardless of TV type. press the YELLOW(ALT) key. [T] at the right corner on the banner shows that Teletext is Then you can get all NVOD
Résumé du contenu de la page N° 10
OPERATING THE RECEIVER OPERATING THE RECEIVER 1.1 LNB Setting Main Menu You can select the satellite and LNB setting conditions to After installing your antenna system and STB with appropriate connectors. execute channel search and you can alter the settings for ● Plug in the AC main power and switch on the receiver. 22KHz tone. The parameters set in this menu are needed for ● Press MENU key to bring up the main menu. programming the channels for the “Auto scanning” and The LED display will
Résumé du contenu de la page N° 11
OPERATING THE RECEIVER OPERATING THE RECEIVER 1.2.1 User Mode 1.3 Solarsat Setting ● Select Driving Mode: This menu is only for the Solarsat antenna. You have an option to choose the positioner’s movement type: When you press this menu, you will get this message, Continuous, Step or Time. “This menu is only for the Solarsat antenna. ● Position the antenna with north, south, east and west and If you have one-press OK, otherwise-press EXIT.” use the / / / key to drive motor. key drive
Résumé du contenu de la page N° 12
OPERATING THE RECEIVER OPERATING THE RECEIVER 1.5 Manual Scanning 1.6 SMATV Scanning To tune-in new channels and weak signals, the STB has been In case that several generations use Antenna and LNB in provided with the option “Manual Scanning” where the channel common, search the service the from 950 to 2150MHz. data can be entered by the user. ● Select Searching Type “Automatic” or “Manual”. After selecting the “Manual Scanning” from the Installation Menu, ● Select Scan Mode “All” or “Only Fr
Résumé du contenu de la page N° 13
OPERATING THE RECEIVER OPERATING THE RECEIVER 2.4 Delete All Channels 2. Channel Organising At the request window, press OK key to delete The “Channel Organising” menu has seven functions: all channels and press EXIT to exit. This menu is for removing some channels from channel list which are related with designated Satellite or Transponder. And it provides making favorite list and moving channel position as you want. ● Enter the PIN Code. If you have not entered your own PIN Code 0000 appli
Résumé du contenu de la page N° 14
OPERATING THE RECEIVER OPERATING THE RECEIVER 2.7 Move & Edit Channel 3. Parental Lock ● Select the TV/RADIO list with / or TV/RADIO key. This “Parental Lock” feature sets viewing restrictions and Select a channel in the TV or Radio list with / or prevents unauthorized access to your STB through the PIN PG+/PG- keys or numeric keys. (Personal Identification Number), which is a 4 digit number. (The factory preset PIN Code : 0000) Select channel by pressing the RED( i ) key. Press the /
Résumé du contenu de la page N° 15
OPERATING THE RECEIVER OPERATING THE RECEIVER 3.2 Change PIN Code 4.2 OSD Setting To change the PIN Code, select the second option “Change PIN Code”. You can set the OSD transparency, the display time, Color Scheme and OSD Position. This will take you to the following menu: ● Select OSD Transparency level. In this option, you need to enter the current PIN Code at The OSD Transparency level from 0 to 100%. the first cursor, and at the second cursor enter the desired Setting is made with th
Résumé du contenu de la page N° 16
OPERATING THE RECEIVER OPERATING THE RECEIVER To set User defined mode or EPG color mode 4.4 Time & Timer Setting ● Press the GREEN(TEXT) key. 1) Time The item which you want to change will appear. ● Place the cursor on this sub menu and press OK. ● Move the item which you want to change using the / keys. ● Press / keys to change local time in Time Zone. ● Set the color you want using the / keys. The local time will be changed according to your location. ● Press the OK key to
Résumé du contenu de la page N° 17
OPERATING THE RECEIVER OPERATING THE RECEIVER 4.5 System Information 4.7 Copy Channel Data If you have to contact your service provider or a service center If you want to copy the channel data from one receiver they might ask for information available from this menu. to another, please follow the instruction below. Place the cursor on this sub menu and press the OK key. Please make your own channel data, such as favorite The following will be the on-screen display. & lock channel w
Résumé du contenu de la page N° 18
TROUBLESHOOTING TECHNICAL SPECIFICATIONS Power supply Problem Possible cause Solution of the problem Type : SMPS No display LED on Power cord Power cord plug in correctly Input voltage : AC 100-240V~, 50/60 Hz the front panel; not plugged in correctly No power supply Fuse rating : 250 V/T1.6AH No pictures on the screen Receiver in Standby mode; Set receiver to “On”; Tuner Scart not connected tightly Check connection and correct; to video output of television; Freq. Range : 950 ~ 2150 MHz incorr
Résumé du contenu de la page N° 19
TECHNICAL SPECIFICATIONS MEMO A/V output RCA JACK : VIDEO (CVBS), AUDIO R&L RF modulator Modulator output : CH 21_69 (preset to CH 21) Video type : PAL B/G, I, D/K UHF output level : 70 ± 5 dBµV Output connector : IEC male Ant. O/P connector : IEC female Tuning method : PLL frequency synthesizer Serial data interface Standard : RS232C, Max. 115.2 kB Connector type : 9 pin D-type female DIGIT A L SA TELLITE RECEIVER GB-34 GB-35 DSB-A100F GB DSB-A100F
