Résumé du contenu de la page N° 3
Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Front and Rear Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Icon Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Terminology . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 4
Trunk Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Setting the Squelch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Programming Trunking Frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 STEP 1: Selecting Trunking System Type . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 5
Introduction The BCT8 is a state-of-the-art Trunk Tracking Scanner with BearTracker technology which will alert you when the highway patrol is within approximately a 3 mile radius. It can store 250 frequencies such as police, fire/emergency, marine, railroad, air, amateur, and other communications into 5 banks of 50 channels for a total of 250 channels. Use your new scanner to monitor: • Highway Patrol • Local Police and Country Sheriffs • Trunking for: Motorola Type I Type II Type II: (Hybrid
Résumé du contenu de la page N° 6
Front and Rear Views 4 5 6 7 8 9 10 11 1-50 51-100 101-150 HWY STATE 1 2 3 1 DELAY 12 151-200 201-250 push SQL PVT FLASH 4 5 6 L/O ALERT MUTE SVC 13 2 HOLD/RESUME DATA 7 8 9 SRCH RMT M-LOCK PRI 3 BCT8 TRUNK . 0 E push ALERT VOL 14151617 18 19 20 1. Squelch Control / Flash Brightness 10. Highway Scanning / State Key (HWY, Selector (SQL, FLASH) STATE) 2. Alerting Light (ALERT) 11. Numeric Keypad 3. Volume Control / Alert Tone Selector 12. Up Key () (VOL) 13. Down Key () 4. Mute Key (MUTE) 14. Da
Résumé du contenu de la page N° 7
Icon Display 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1718 19 28 20 21 22 21 23 24 25 26 27 1. Trunk Tracking mode (TRUNK) 15. News scan mode (NEWS) 16. Citizen Band scan mode (CB) 2. Motorola trunking channel (M) 3. EDACS trunking channel (E) 17. Aircraft band scan mode (AIR) 18. Railroad scan mode (RR) 4. LTR trunking channel (L) 5. Scan list (LIST) 19. Marine scan mode (MRN) 6. Scan bank (BANK) 20. Scan hold and Search hold mode (HOLD) 7. Bank’s number and ID’s list number 21. Search direction
Résumé du contenu de la page N° 8
Terminology What are Highway Patrol Alerts? Most highway patrol vehicles on the road today are equipped with a secondary radio system known as a “mobile extender” or “vehicular repeater.” Whenever the dispatcher transmits to any vehicle in the district, “mobile extender” in every car within the district is activated. Using a constant PRIORITY check of specific frequencies in each state, the BCT8 recognizes and alerts you to transmissions from “mobile extender” radios as well as from car-to-car,
Résumé du contenu de la page N° 9
In a trunked radio system the frequencies are shared among the police and fire departments and a computer systematically assigns available frequencies when they are needed for communications. Sharing of the available public service frequencies, or trunking, allows cities, counties, or other agencies to accommodate hundreds of users with relatively few frequencies. Following a conversation on a trunked system using a scanner is difficult, if not impossible. Because when there's a short break duri
Résumé du contenu de la page N° 10
Feature Highlights • Pre-programmed frequencies specific to each state (except Hawaii). • Pre-programmed Trunked and conventional Highway Patrol frequencies • Highway Patrol Priority Alert -Receive audible and visual alert when within three miles of many Highway Patrol/State units • Pre-programmed frequencies for the following categories: -Local Police and County Sheriffs -Fire and Emergency Medical Service -News Media -Weather (continuous NOAA weather and Canadian Coast Guard broadcasts) -
Résumé du contenu de la page N° 11
Where to Obtain More Information Before you can scan the PRIVATE bank, you must program frequencies into the scanner’s channels. The Frequency Guide lists typical frequencies used around the U.S.A. and Canada that you may program into your new scanner. However, this is not a complete list of frequencies for your area. To obtain frequency information for your area, contact one of the following: • Scanner Master 1 (800) Scanner (7226634) (Hours are from 10:00 a.m. to 5:00 p.m. Eastern Time Monday
Résumé du contenu de la page N° 12
Included with Your Scanner Package • BCT8 Scanner • AC Adapter (AD 140U) • DC Power Cord • Cigarette Lighter Adapter Plug (Model CD007) • Telescopic Antenna (Model AT129) • Window Mount Antenna (Model AT002) • Operating Guide • Trunk Tracker Frequency Guide • Other Printed Materials • Remote Programming Software CD-ROM • Mobile Mounting Bracket (Model MB-008) If any of these items are missing or damaged, immediately contact your place of purchase or Uniden Customer Service at: (800) 297-1023, 8
Résumé du contenu de la page N° 13
Installing the BCT8 For Home Use (Desktop Installation) 1. Insert the DC plug end of the AC Adapter into the DC 12V jack on the rear panel. 2. Plug the AC Adapter into a standard 120V AC wall outlet. 3. Plug the Telescoping Antenna into the ANT connector. Extend the antenna to its full height. For frequencies higher than 406 MHz, shortening the antenna may improve the reception. 4. Use the desktop stand for a better viewing and operating angle. Helpful Hints • If strong interference or electrica
Résumé du contenu de la page N° 14
3. Drill the necessary holes and secure the mounting bracket in place using the screws provided. 4. Mount the radio to the bracket only after the wiring has been connected to the rear panel. Connecting the Power Cord Note: If you are not experienced in connecting accessories to the vehicle fuse box, please see your automotive dealer for advice on proper installation. Installation for everyday use: 1. Check the vehicle battery connections to determine which battery terminal (positive or negative)
Résumé du contenu de la page N° 15
SQL VOL Typical Mounting Methods The BCT8 can be conveniently mounted on a table, bulkhead, overhead, or any other desired location with the supplied mounting bracket (MB008) (refer to figure below for typical mounting methods). Caution: Make sure there are no hidden electrical wires or other items behind the desired location before proceeding. Check that free access for mounting and cabling is available. • Table top mount • Bulkhead mount • Overhead mount Mounting the Scanner in Your Vehicle B
Résumé du contenu de la page N° 16
Applying Power for Vehicle Installation You can power your scanner using the supplied DC cigarette lighter power cord or an DC power cord. DC power Installation To power the scanner from a vehicle’s 12V power source (such as a cigarette-lighter socket), you need a cigarette-lighter adapter. To connect an DC cigarette-lighter power cable, insert its barrel plug into the DC 12V jack on the rear of the scanner, then plug the power cable into your vehicle’s cigarette lighter socket. Note: If you us
Résumé du contenu de la page N° 17
12V Applying Power Using Standard AC Power To power the scanner from an AC outlet, use the provided AC adapter with a 5.5 mm outer diameter/2.1mm inner diameter tip. Caution: You must use a Class 2 power source that supplies 12V DC and delivers at least 500 mA. The cord connector’s center tip must be set to positive and its plug must fit the scanner’s DC 12V jack. Using an adapter that does not meet these specifi- cations could damage the scanner or the adapter. • Always connect the AC adapter t
Résumé du contenu de la page N° 18
Scanning Overview You can scan in one of four ways: 1. Highway Patrol Scanning When you select a state you want to scan in Highway Patrol mode, you can scan pre-programmed Highway Patrol frequencies. 2. Service Scanning Press SVC to select one of the nine services to find an active frequency. 3. Band Search Select a frequency band to search. The Search function is different from scanning. It searches for any active frequency step by step within the lower and upper limits of the band. When an act
Résumé du contenu de la page N° 19
How Squelch Works Think of “SQUELCH” as a gate. If the gate is too low (squelch Strong Signals too low), everything (all noise as well as signals) gets through. Medium Signals Weak Signals Noise If the gate is set too high (squelch too high), nothing gets Strong Signals through. Medium Signals Weak Signals Noise If the gate is set just right (squelch set properly), just the desired Strong Signals signals get through. Medium Signals Weak Signals Noise Setting the Squelch 1. To set the squelch, pr
Résumé du contenu de la page N° 20
Highway Patrol Scanning Highway Patrol frequencies are pre-programmed on a state-by-state basis. When Highway Patrol scanning, the Highway Warning Alert is activated. Selecting the State 1. Press STATE to select the state you are operating in. Press and hold STATE to scroll rapidly. Hint: For the State Code Order, please see page 56. 2. To step forward through the states (A - W), press STATE and, within three seconds, press the key repeatedly. To step backward through the states (W - A), pre
Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Precautions Before you use this scanner, please observe the following: WARNING! Uniden America Corporation does not represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, do not expose this unit to rain or moisture. IMPORTANT! • This scanning radio has been manufactured so that it will not tune radio frequencies assigned by the FCC for cellular telephone usage. The Electronic Communications Privacy Act of 1986, as amended, makes it a federal cr
