Résumé du contenu de la page N° 1
FlexiDome2X
VDN-0498
en Installation Manual
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
FlexiDome2X Table of Contents | en 3 Table of Contents 1Safety 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Connection in outdoor applications 7 1.3.1 Safety precautions 7 1.4 FCC information 9 1.5 UL certification 11 1.6 Bosch notice 11 2 Introduction 13 2.1 Features 13 3 Installation 15 3.1 Unpacking 15 3.2 Disassembly 16 3.3 Mounting the unit 17 3.3.1 Mounting tips 17 3.3.2 Flush mounting 18 3.3.3 Surface mounting 19 4 Connection and set-up 21 4.1 Power and video connect
Résumé du contenu de la page N° 4
4 en | Table of Contents FlexiDome2X 5.2 Pre-defined modes 30 5.3 Day/Night switching 31 5.4 Camera control communication (Bilinx) 31 5.5 Main menu structure 32 5.5.1 Mode submenu 32 5.5.2 ALC submenu 33 5.5.3 Shutter/AGC submenu 34 5.5.4 Day/Night submenu 35 5.5.5 Enhance / Dynamic Engine submenu 37 5.5.6 Color submenu 38 5.5.7 VMD submenu 39 5.6 Install menu structure 41 5.6.1 Language submenu 42 5.6.2 Connections submenu 42 5.6.3 Test signal submenu 43 5.6.4 Camera ID submenu 44 5.6.5 Privacy
Résumé du contenu de la page N° 5
FlexiDome2X Safety | en 5 1Safety 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical shock, serious bodily injury, or death. WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily ! injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this
Résumé du contenu de la page N° 6
6 en | Safety FlexiDome2X 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Generally, using a dry cloth for cleaning is sufficient but a moist, fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners. 2. Heat Sources - Do not install the unit near any heat sources such as
Résumé du contenu de la page N° 7
FlexiDome2X Safety | en 7 1.3 Connection in outdoor applications 1.3.1 Safety precautions Coax grounding: If an outside cable system is connected to the unit, ensure that the system is grounded. U.S.A. models only: Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to ground electrode
Résumé du contenu de la page N° 8
8 en | Safety FlexiDome2X CAUTION! The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - ! Class 2 unit (Safety Extra Low Voltage - Limited Power Source). Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and dispo
Résumé du contenu de la page N° 9
FlexiDome2X Safety | en 9 1.4 FCC information FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions
Résumé du contenu de la page N° 10
10 en | Safety FlexiDome2X Informations FCC et ICES (modèles utilisés aux États-Unis et au Canada uniquement) Suite à différents tests, cet appareil s'est révélé conforme aux exigences imposées aux appareils numériques de classe B, en vertu de la section 15 du règlement de la Commission fédérale des communications des États-Unis (FCC), et en vertu de la norme ICES-003 d'Industrie Canada. Ces exigences visent à fournir une protection raisonnable contre les interférences nuisibles lorsque l'
Résumé du contenu de la page N° 11
FlexiDome2X Safety | en 11 Printing Office, Washington, DC 20402, États-Unis, sous la référence n° 004-000-00345-4. 1.5 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliabilit
Résumé du contenu de la page N° 12
FlexiDome2X Introduction | en 13 2 Introduction 2.1 Features The FlexiDome2X camera is a small, discreet, high-performance surveillance dome containing a high-performance 1/3-inch CCD sensor camera with integral varifocal lens. This surveillence dome can be mounted to an electrical box, to a wall, to a ceiling or in a corner. The sturdy construction and the high impact- resistant polycarbon dome protect the camera module from damage. The camera incorporates advanced (20-bit) digital signal
Résumé du contenu de la page N° 13
FlexiDome2X Installation | en 15 3 Installation 3.1 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – Integrated FlexiDome camera unit – Important safety instructions – Quick install instructions –CD ROM – Installation Instructions – Adobe Acrobat Reader – Plastic bag with mounting hardware (three SX8 4.5-6 mm mounting plugs and three matching mounting screws), and special screwdriver bit for tamper-resistant screws – Plastic bag with two black rubber gr
Résumé du contenu de la page N° 14
16 en | Installation FlexiDome2X 3.2 Disassembly The flush-mount version consists of the following parts: Camera module and mounting base Inner liner (with sealing ring) Trim ring Dome Figure 3.1 Flush-mount The surface-mount version consists of the following parts: Surface mounting box Camera module and mounting base Inner liner (with sealing ring) Trim ring Dome Figure 3.2 Surface-mount AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems
Résumé du contenu de la page N° 15
FlexiDome2X Installation | en 17 To disassemble the unit proceed as follows: 1. Use the special screwdriver bit to loosen the three tamper- resistant screws in the trim ring (the screws remain in place). 2. Remove the trim ring and dome by pulling them from the base. 3. Remove the inner liner (with sealing ring) by pulling it off of the base. 4. Remove the pink protective foam. 3.3 Mounting the unit There are several ways to mount the unit. The method of mounting depends on the type of surfa
Résumé du contenu de la page N° 16
18 en | Installation FlexiDome2X 3.3.2 Flush mounting Figure 3.3 Flush mounting - hollow surface 1. Solid surface (pre-drill three 8mm holes and fit supplied plugs) 2. Three screws (supplied with camera) 3. Integrated camera unit and base 4. Cables Figure 3.4 Flush mounting - electrical box (4S) 1. Two screws (not supplied) 2. Integrated camera unit and base 3. 4S electrical box AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems
Résumé du contenu de la page N° 17
FlexiDome2X Installation | en 19 3.3.3 Surface mounting When using the surface mounting box: – With a side connection, remove the cap covering the side entrance. With a rear connection, leave the cap in place. – Attach the conduit to the mounting box. – Release the two clips at the bottom of the watertight connection compartment to remove it from the mounting box. – Open the cover of the watertight compartment in the mounting box by releasing the five clips. – Run the power and video cables
Résumé du contenu de la page N° 18
20 en | Installation FlexiDome2X Figure 3.6 Surface mounting - side connection 1. Solid surface (pre-drill three 8mm holes and fit supplied plugs) 2. Three screws (supplied with camera) 3. Three screws (M5, supplied) 4. Integrated camera unit and base 5. Surface mounting box (VDA-455SMB) 6. Cables 7. Conduit Figure 3.7 Surface mounting - rear connection 1. Solid surface (three pre-drilled 8mm holes and fit supplied plugs) 2. Three screws (supplied with camera) 3. Three screws (M5, supplied) 4. I
Résumé du contenu de la page N° 19
FlexiDome2X Connection and set-up | en 21 4 Connection and set-up 4.1 Power and video connections The wiring harness has a BNC connector to accept the video coax cable (with male BNC connector) and two stripped low voltage power wires for connection to a power connector. A UTP adapter (VDA-455UTP) is available as an optional accessory to allow a UTP video cable to be connected to the BNC connector. WARNING! Before proceeding, disconnect the power from the power supply cable. Ensure that t
Résumé du contenu de la page N° 20
22 en | Connection and set-up FlexiDome2X 6. In damp environments ensure that the connections are sealed. (The surface mounting box and the other mounting accessories have a sealed compartment for this purpose.) 7. Push the connections back through the surface cable hole. 8. Secure the mounting base of the camera module to the surface with three screws. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems
