Résumé du contenu de la page N° 1
COLOR WIRELESS
SURVEILLANCE SYSTEM
WITH INDOOR / OUTDOOR
NIGHT VISION CAMERA(S)
Instruction Manual
English Version 4.0
MODELS:
LW1000 Series
www.lorexcctv.com
LW1000 Series includes: LW1001, LW1002, LW1010, LW1012, LW1020, and LW1022
Copyright © 2008 Lorex Technology Inc.
Résumé du contenu de la page N° 2
Thank you for purchasing the LW1000 Series Color Wireless Series Surveillance System. Lorex is committed to providing our customers with a high quality, reliable security product. http://www.lorexcctv.com Wireless Disclaimer: This product broadcasts over public airways and its video and audio signals may be intercepted without your consent. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT R
Résumé du contenu de la page N° 3
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installa
Résumé du contenu de la page N° 4
Important Safeguards Service Use 19. Cleaning - Unplug the video product from the 13. Servicing - Do not attempt to service this wall outlet before cleaning. Do not use liquid video equipment yourself as opening or cleaners or aerosol cleaners. Use a damp removing covers may expose you to cloth for cleaning. dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination should be mov
Résumé du contenu de la page N° 5
General Precautions General Precautions 1. All warnings and instructions of this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning 3. Do not use this unit in extremely humid or wet places (i.e. Restaurant Kitchen, inside a Sauna, etc.) 4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked 5. During lightning storms,
Résumé du contenu de la page N° 6
Features Features ‘EWT’ Eliminates Interference From Most Household Devices Fast & Easy Installation- Plug Into any AC Outlet Receiver Connects to any TV/VCR/DVD Recorder Indoor / Outdoor Night Vision Camera Built-in Microphone for Listening Ability Camera can be Battery Operated Up to 300ft Wireless Transmission Range* Night Vision Allows for Low Light Viewing. Receiver Automatically Switches View Between Cameras** Desktop or Wall Mountable RCA Audio/Video Connector
Résumé du contenu de la page N° 7
Getting Started Getting Started The LW1001 and LW1002 come with the following components: 1 x WIRELESS RECEIVER WIRELESS CAMERA * POWER ADAPTOR (FOR CAMERA) * 1 x POWER ADAPTOR CAMERA BATTERY 1 x RCA VIDEO CABLE (FOR RECEIVER) ADAPTOR CABLE * The LW1010, LW1012, LW1020, and LW1022 come with the following components: 1 x WIRELESS RECEIVER WIRELESS CAMERA * POWER ADAPTOR (FOR CAMERA) * 1 x POWER ADAPTOR CAMERA BATTERY 1 x RCA 1 x USB CABLE ** (FOR RECE
Résumé du contenu de la page N° 8
Wireless Receiver Wireless Receiver NOTE: The USB Port is ONLY on the LW1020 and LW1022 Models. 1. DC 9V (5V for LW1020/LW1022) 2 4 1 3 INPUT – Connection port for the 9V/5V Power Adaptor (provided with this system). Connect the Power Adaptor to a power source. NOTE: It is recommended that the receiver be connected to a surge bar or similar to protect the equipment from damage. 2. USB Port (ONLY on the LW1020 and LW1022 Models) The USB Port enables the receive
Résumé du contenu de la page N° 9
Control Buttons Control Buttons 1. AUTO BUTTON – When the receiver is set to AUTO Mode, it will continuously switch between connected cameras. The dwell time is set to 4 seconds per camera (by default), however this can be adjusted to 2~30 seconds. • LW1001/ LW1002/ LW1010 /LW1012: To adjust the dwell time, press and hold both the AUTO and MANUAL buttons at the same time – this will produce beeps indicating one second increments. Once the desired dwell time has been reached, rel
Résumé du contenu de la page N° 10
Camera Installation Camera Installation Before you install the camera(s), carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adaptor or battery adaptor. Installation Warnings: • Aim the Cameras to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunl
Résumé du contenu de la page N° 11
Camera Installation Installing the Camera: 1. Carefully unpack the Camera. 2. Decide whether the camera will be permanently wall mounted or sit on a tabletop: • If you decide to place the camera on a tabletop or other flat surface, the camera can easily be moved to different locations as desired. It is strongly recommended that the camera be affixed to the table top surface to prevent damage to the camera in case of tabletop surface movement or improper handling. • If you decid
Résumé du contenu de la page N° 12
Wall Mounting Instructions (for the LW1010, LW1012, LW1020, LW1022 ONLY) To mount the camera to a wall: 1. Loosen the screw located on the side of 1 the camera base using a slot head screwdriver. 2. Pull the camera free from the Stand. 2 Mount the stand to the wall: • Mark the position of the two screw holes on the wall. • Drill holes and insert the drywall plugs as 3 needed. • Position the power cable through either slot on the top or bottom
Résumé du contenu de la page N° 13
4 4. Insert the Camera into the top slot of the stand. 5 5. Point the camera in the desired position. Tighten the side screw to secure the camera to the Stand. 6. Adjust the angle of the camera for a desired view. 6 Connecting Camera Power The Camera can be powered either by using the provided Power Adaptor, or using a 9v battery (not included) and the Battery Adaptor Cable: • POWER ADAPTOR: Connect the Power Adaptor to
Résumé du contenu de la page N° 14
NOTE: Wireless cameras require a power source (either an electrical outlet or battery power) to operate. If you plan to permanently mount the camera in a location, it is recommended to use the included Camera Power adaptor to prevent interruptions in the image, as the battery adaptor is intended as a temporary power solution. Power Adaptor: Battery: Connect the Connect the Power Camera Battery Adaptor Adaptor to the Female cable to the Female Barrel Power Barrel Power termi
Résumé du contenu de la page N° 15
Troubleshooting Troubleshooting If you have problems with your System, there is often a quick and simple solution. Please try the following: Problem Solution (for LW1001, LW1002, LW1010, (for LW1001, LW1002, LW1010, LW1012, LW1020, and LW1022) LW1012, LW1020, and LW1022) There is no picture from a Camera. • Check all connections to the Camera. Make sure the adaptor is plugged in. • Make sure that the Cameras and Receiver are both ON. • Make sure that the receiver is set to sear
Résumé du contenu de la page N° 16
Appendix #1 - Receiver Specifications Appendix #1 - Receiver Specifications Specification Specification Specification Feature LW1010 / LW1012 LW1020 / LW1022 LW1001 / LW1002 Frequency 902MHz ~ 928MHz 902MHz ~ 928MHz 902MHz ~ 928MHz Signal / 48dB 48dB 48dB Noise Ratio Operating -10°C ~ 40°C -10°C ~ 40°C -10°C ~ 40°C Temperature RCA Audio / Video Output RCA Audio / Video RCA Audio / Video / USB Humidity Less than 85% Less than 85% Less than 85% Current Approx. 100mA Approx
Résumé du contenu de la page N° 17
17
