Instruction d'utilisation Q-See - Digital Peripheral SolutionsQT19DVR8C

Résumé du contenu de la page N° 1

Quick Installation Guide
MODEL QT19DVR8C 8 CH DVR



Package Contents:

1. 1-19" TFT w/built-in 8 Channel MPEG4 DVR
2. 8 - CCD Outdoor Night Vision Cameras
3. 1- Remote control
4. 1- Power Cable
5. 8- BNC Cables (60 foot)
6. 1- USB cable
8. 1- Installation CD for Remote Client Program
9. Hard drive (Optional)
10. 1- set key for the hard drive bay
11. Manual


Tech Support:

Website: www.q-see.com and click on support.
Email: ts@dpsi-usa.com
Phone: Toll Free: 877-998-3440

Résumé du contenu de la page N° 2

To Record With Your DVR: There are 3 modes for recording: 1. Manual recording: Push the RECORD button. It will record all the time until you stop it by pushing the RECORD button again. 2. Motion Detection Recording: This will record only when there is a Motion in front of the camera. 3. Time Schedule Recording: Use this option to record during specific times. To Set Up Motion Detection Recording: Use the remote control and push MENU, the default password is 88888888 then follow the

Résumé du contenu de la page N° 3

To Set Up Schedule Recording: Use the remote control and push MENU, the default password is 88888888 then follow the instructions below: Go to Schedule and push Menu to enter In this Menu, click the second icon (Record) Highlight the first line and push RIGHT arrow on remote control, you will get the next screen…….. Select Monday and select the quality then select ENABLE at the bottom. Push LEFT arrow to exit and repeat steps for the other days. Playback To

Résumé du contenu de la page N° 4

Accessing the DVR through a Computer You can access the DVR through the client software that comes with the DVR, or through an internet browser. Instructions to access through a browser are included below, to access through the client program please see client program instructions on the included CD. To access the DVR through a computer you need to make sure the default gateway on the DVR is the same IP address as your router, and the first three sets of numbers of the DVR IP

Résumé du contenu de la page N° 5

Login Screen Internet Explorer Webcam Screen Accessing the DVR From a Remote Computer In addition to the above, before you can access the DVR from a remote computer you would need to forward port 80 , 3357 and 3358 on the router that the DVR is attached to the IP address of the DVR. How you would do this depends on the brand and model number of your router. You can go to www.portforward.com to get instructions on how to forward ports on most popular routers. To access you

Résumé du contenu de la page N° 6