Résumé du contenu de la page N° 1
Installation Manual
®
NetBotz Camera Pod 160
NBPD0160
Résumé du contenu de la page N° 2
This manual is available in English on the enclosed CD. Dieses Handbuch ist in Deutsch auf der beiliegenden CD-ROM verfügbar. Este manual está disponible en español en el CD-ROM adjunto. Ce manuel est disponible en français sur le CD-ROM ci-inclus. Questo manuale è disponibile in italiano nel CD-ROM allegato. 本マニュアルの日本語版は同梱の CD-ROM からご覧になれます。 Instrukcja obs ługi w j ęzyku polskim jest dost ępna na CD. O manual em Português está disponível no CD-ROM em anexo. Данное ру к о во дс тво на ру с с к
Résumé du contenu de la page N° 3
Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Document overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Additional documentation . . . . . . . . . . . . . . . . . . . . . . . . . 3 Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 InfraStruXure-certified . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 4
Résumé du contenu de la page N° 5
Introduction Product description ® ® The American Power Conversion (APC ) NetBotz Camera Pod 160 is a motion-sensitive camera capable of sending image data through a USB connection to a Rack Monitor 450, Rack Monitor 550, or Room Monitor 455. The NetBotz 160 can be triggered remotely by the appliance in response to a number of environmental alarms or events, such as a temperature spike or the action of opening a door. The NetBotz 160 can also provide constant surveillance of an area or ent
Résumé du contenu de la page N° 6
The imager of the NetBotz 160 supports two imaging modes: Wide Screen mode and Pan and Scan mode. • In Wide Screen mode, all images that are captured are based on the entire 1280 x 1024 frame. The NetBotz 160 then reduces the total 1280 x 1024 frame to the appropriate resolution or mode, resulting in a smaller image that includes the entire field of view supported by the NetBotz 160. However, in reducing the image to smaller sizes some image detail will be lost. • In Pan and Scan mode, a
Résumé du contenu de la page N° 7
Document overview The NetBotz Camera Pod 160 Installation Manual describes how to install the NetBotz 160. For details on connecting the NetBotz 160 to your appliance, see the installation and quick configuration manual included with your appliance. Additional documentation Unless otherwise noted, the following documentation is available on the CD provided with the device or on the applicable product page on the APC Web site, www.apc.com. To quickly find a product page, enter the product nam
Résumé du contenu de la page N° 8
Physical Description Item Description Wall mount Used to attach the wall mounting swivel arm. USB Type B Used to connect the NetBotz 160 to a NetBotz appliance with a standard USB cable. Door switch sensor RJ-45 port used to connect a door switch sensor. port Microphone jack 3.5-mm stereo miniplug jack used to connect an external microphone. Maximum length of microphone cable: 3 m (9.8 ft). Speaker jack 3.5-mm stereo miniplug jack used to connect headphones or powered speakers. Maxi
Résumé du contenu de la page N° 9
Inventory Inspect the contents of the package to ensure that the parts included match those shown below. Report missing or damaged contents to APC or your APC reseller. However, if damage was due to shipping, immediately report the damage to the shipping agent. The shipping and packaging materials are recyclable. Please save them for later use or dispose of them appropriately. . Item Description NetBotz Camera Pod 160—not shown Bracket mounting plate for electrical boxes Adhesive cable tie
Résumé du contenu de la page N° 10
Item Description 203-mm (8-in) wire ties Ball-joint adjuster arm Extender arm set screw Cable retainer Allen wrench Rubber bracket cover Mounting plate Extender arms 5-m (16.4-ft) USB cable—not shown 6 NetBotz Camera Pod 160 Installation Manual
Résumé du contenu de la page N° 11
Install the NetBotz 160 Choose an installation option that meets your needs. Once installed, use the 5-m (16.4-ft) USB cable to connect the NetBotz 160 to your NetBotz Rack Monitor 450, NetBotz Rack Monitor 550, or NetBotz Room Monitor 455. Note: Mounting the NetBotz 160 inside a rack requires the Rack Mounting Kit (NBES0302). Electrical box Wall Note: Drill 4.76-mm (3/16-in) pilot holes for wall anchors. Caution: Do not overtighten the screws. NetBotz Camera Pod 160 Installation Manual 7
Résumé du contenu de la page N° 12
Ceiling 8 NetBotz Camera Pod 160 Installation Manual
Résumé du contenu de la page N° 13
Enclosure Note: Use a #32 drill to make four 2.94-mm (0.116-in) pilot holes. Connect Optional Devices As applicable, install the options listed below, then connect them to the back of the NetBotz 160. • Door Switch Sensor for APC Racks (NBES0303) or Door Switch Sensor for Rooms of Third-Party Racks (NBES0302) • External microphone • Set of speakers Note: If the cable of a Door Switch Sensor for APC Racks is not long enough, use an RJ-45 coupling provided with the sensor to extend the cabl
Résumé du contenu de la page N° 14
Adjust the Lens View the camera feed during the adjustment of the camera in lens housing order to correctly adjust the focus of the feed and field of view settings. To access the adjustment screws, remove the lens lock housing by turning the lens unlock housing counter-clockwise until the latches disengage. aperture To reattach the lens housing, engage the latches and rotate the housing clockwise until a click is heard. To adjust the aperture of the lens, rotate the aperture ring c
Résumé du contenu de la page N° 15
Specifications Electrical Input voltage, nominal 5 VDC Maximum power consumption 2 W Physical Dimensions (H x W x D) 102 x 100 x 78 mm (4.00 x 3.93 x 3.09 in) Weight 0.2 kg (0.4 lb) Shipping weight 1.4 kg (3.00 lb) Shipping dimensions 260 x 286 x 165 mm (10.25 x 11.25 x 6.50 in) (H x W x D) Environmental Elevation (above MSL) Operating 0 to 3000 m (0 to 10,000 ft) Storage 0 to 15 000 m (0 to 50,000 ft) Temperature Operating 0 to 45ºC (32 to 113°F) Storage -15 to 65°C (5 to 149°F) Relative Hu
Résumé du contenu de la page N° 16
Two-Year Factory Warranty This warranty applies only to the products you purchase for your use in accordance with this manual. Terms of warranty APC warrants its products to be free from defects in materials and workmanship for a period of two years from the date of purchase. APC will repair or replace defective products covered by this warranty. This warranty does not apply to equipment that has been damaged by accident, negligence or misapplication or has been altered or modified in any w
Résumé du contenu de la page N° 17
AND IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES. THE WARRANTIES SET FORTH ABOVE CONSTITUTE APC’S SOLE LIABILITY AND PURCHASER’S EXCLUSIVE REMEDY FOR ANY BREACH OF SUCH WARRANTIES. APC WARRANTIES EXTEND ONLY TO PURCHASER AND ARE NOT EXTENDED TO ANY THIRD PARTIES. IN NO EVENT SHALL APC, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES BE LIABLE FOR ANY FORM OF INDIRECT, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, ARISING OUT OF THE USE, SERVICE OR INSTALLATION, OF THE PRODUCTS, WHETHER
Résumé du contenu de la page N° 18
Radio Frequency Interference Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. USA—FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
Résumé du contenu de la page N° 19
Australia and New Zealand Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. European Union This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. APC cannot accept responsibility for any failure to satisfy the protection requiremen
Résumé du contenu de la page N° 20
APC Worldwide Customer Support Customer support for this or any other APC product is available at no charge in any of the following ways: • Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support requests. – www.apc.com (Corporate Headquarters) Connect to localized APC Web sites for specific countries, each of which provides customer support information. – www.apc.com/support/ Global support searching APC Knowledge Base and using e-support. • Contac
