Résumé du contenu de la page N° 1
FPT-1015
User Manual
FPT-1015 User Manual
December 2006
372051A-01
Résumé du contenu de la page N° 2
Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide Offices Australia 1800 300 800, Austria 43 0 662 45 79 90 0, Belgium 32 0 2 757 00 20, Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 6555 7838, Czech Republic 420 224 235 774, Denmark 45 45 76 26 00, Finland 385 0 9 725 725 11, France 33 0 1 48 14 24 24, Germany 49 0 89 741 31 30, India 91
Résumé du contenu de la page N° 3
Important Information Warranty The FPT-1015 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor. The media on which you receive National Instruments software are warranted not to fail to execute programming instructions, du
Résumé du contenu de la page N° 4
Compliance Compliance with FCC/Canada Radio Frequency Interference Regulations Determining FCC Class The Federal Communications Commission (FCC) has rules to protect wireless communications from interference. The FCC places digital electronics into two classes. These classes are known as Class A (for use in industrial-commercial locations only) or Class B (for use in residential or commercial locations). All National Instruments (NI) products are FCC Class A products. Depending on where it
Résumé du contenu de la page N° 5
Conventions The following conventions are used in this manual: » The » symbol leads you through nested menu items and dialog box options to a final action. The sequence File»Page Setup»Options directs you to pull down the File menu, select the Page Setup item, and select Options from the last dialog box. This icon denotes a note, which alerts you to important information. This icon denotes a caution, which advises you of precautions to take to avoid injury, data loss, or a system crash. When
Résumé du contenu de la page N° 6
Contents Chapter 1 General Information Introduction....................................................................................................................1-1 Connectors .....................................................................................................................1-1 VGA Port (DB15)............................................................................................1-1 USB Type B Touchscreen Connector .....................................................
Résumé du contenu de la page N° 7
1 General Information This chapter includes an overview of the FPT-1015 human machine interface (HMI). Introduction The FPT-1015 is a 15 in. color TFT LCD flat panel monitor for industrial applications. With the optional touchscreen, this monitor is a user-friendly system control interface and can be easily transformed into a remote control system. In addition to its usual application as an LCD panel monitor, the FPT-1015 includes a Direct VGA control signal input, making it compatible with
Résumé du contenu de la page N° 8
Chapter 1 General Information USB Type B Touchscreen Connector The FPT-1015 includes this connector and a touchscreen cable if a touchscreen is installed. You must connect it to the PC USB port. DC 12 V Power In This connector connects to the DC 12 V switching power supply. FPT-1015 User Manual 1-2 ni.com
Résumé du contenu de la page N° 9
2 Mounting This chapter explains how to mount the FPT-1015. Important Safety Information Before setting up the FPT-1015, read these safety instructions carefully. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. Keep this equipment away from excessive humidity. Place this equipment on a reliable surfa
Résumé du contenu de la page N° 10
Chapter 2 Mounting If one of the following situations arises, have service personnel check the equipment: � The power cord or plug is damaged. � Liquid has penetrated into the equipment. � The equipment has been exposed to moisture. � The equipment does not work well, or you cannot get it to work according to the user manual. � The equipment has been dropped and damaged. � The equipment has obvious signs of breakage. Do not leave this equipment in an environment where the storage temperature
Résumé du contenu de la page N° 11
Chapter 2 Mounting Wall Mounting The FPT-1015 wall mounting kit is optional. As shown in Figure 2-1, screw the hook and wall-mounted brackets to the wall and attach the FPT-1015 to the bracket. Hook Bracket Wall-Mounting Bracket Figure 2-1. Wall Mounting © National Instruments Corporation 2-3 FPT-1015 User Manual
Résumé du contenu de la page N° 12
Chapter 2 Mounting Panel Mounting Refer to Figure 2-2 and follow these steps to install the FPT-1015 in a panel: 1. Place the panel-mounting brackets on the FPT-1015. 2. Fasten the panel-mounting brackets with the screws. 3. Insert the FPT-1015 in the panel. 4. Tighten the screws to fasten the FPT-1015 to the panel. Figure 2-2. Panel Mounting FPT-1015 User Manual 2-4 ni.com
Résumé du contenu de la page N° 13
Chapter 2 Mounting Rack Mounting The rack mounting kit is optional. As shown in Figure 2-3, you can directly mount the FPT-1015 in a standard 19 in. rack and secure it with four screws. Figure 2-3. Rack Mounting © National Instruments Corporation 2-5 FPT-1015 User Manual
Résumé du contenu de la page N° 14
Chapter 2 Mounting Desktop Stand Mounting The desktop stand kit is optional. As shown in Figure 2-4, attach the desktop stand bracket to the rear of the monitor with two screws. Figure 2-4. Desktop Stand Mounting Power Adapter Mounting Attach the power adapter bracket to the rear of the FPT-1015 monitor using four screws. Figure 2-5. Power Adapter Mounting FPT-1015 User Manual 2-6 ni.com
Résumé du contenu de la page N° 15
A Specifications Physical Construction ........................................... Heavy-duty steel chassis Front Panel ............................................. Al-Mg, NEMA4/IP65 compliant Control ................................................... Onscreen display (OSD) control pad on front side Mounting................................................ Panel, wallmount, rackmount (with rackmount kit), desktop, or VESA arm Cutout dimension ................................... 373.5 × 297.5
Résumé du contenu de la page N° 16
Appendix A Specifications Dimensions 383 270.59 308.26 372.6 [15.07] [10.65] [12.13] [14.66] 307 [12.08] 4.5 18.5 48.13 [0.17] [0.72] [1.89] 214.1 [8.42] 15 [0.59] 296.6 [11.67] 100 [3.93] 75 [2.95] 75 100 [2.95] [3.93] FPT-1015 User Manual A-2 ni.com
Résumé du contenu de la page N° 17
Appendix A Specifications Touchscreen Type ....................................................... 8 wire, analog resistive Resolution .............................................. 1024 × 1024 Light transmission.................................. 75% (gouge hardness is greater than 4 H per ASTM D3363-92 for HCC01, HCG10, and HCG12) Controller ............................................... RS232 interface or USB 1.1 OS support.............................................. Windows 9x/NT/2000/XP
Résumé du contenu de la page N° 18
Appendix A Specifications Sensor board ...........................................Chemical strengthened glass with 4 H hardness standard (test condition: ASTM D3363-92A) Ball drop test...........................................Able to bear a 225 g steel ball dropped from 660 mm elevation without breaking Accelerated aging ...................................100 h at 60 °C/95% relative humidity Thermal shock ........................................25 cycles (one cycle is 30 min. dwell altern
Résumé du contenu de la page N° 19
Appendix A Specifications Environmental Maximum altitude .................................. 2,000 m Pollution Degree .................................... 2 Indoor use only Touchscreen Operating temperature range.................. –20 to 50 °C, 2 weeks at 50 °C/90% relative humidity Storage temperature high ....................... 70 °C, 240 h at ambient humidity Storage temperature low ........................ –40 °C, continuous at ambient humidity LCD Operating temperature....................
Résumé du contenu de la page N° 20
Appendix A Specifications Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control, and laboratory use: � EN 55024, CISPR 24 EMC requirements � EN 55022, CISPR 22 Emissions; Class A � EN 55011, CISPR 11 Emissions; Class A � CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A Note For EMC compliance, operate this device according to product documentation. CE Compliance This product meets
