Instruction d'utilisation Velodyne Acoustics VELODYNE CHT-12Q

Résumé du contenu de la page N° 1

tnempiuqe review
Velodyne
CHT-12Q
(DEQ-12R*)
Subwoofer
Velodyne obviously intends its CHT-Q though it also has an equally large number to aid set-up. However, note that you must
Series subwoofers to be used in home theatre with infinite baffle enclosures! Indeed this always run the CHT-12Q calibration BEFORE
applications. This is not mere supposition on time around it was my turn to be surprised by you run your AV receiver’s calibration. (Also,
my part: it’s printed right there on the front

Résumé du contenu de la page N° 2

LAB REPORT switches between signal-sensing activation on the top of the front panel because in my Readers interested in a full technical and ‘On.’ (There’s also a 240V on/off switch, listening room the sub sits directly below my appraisal of the performance of located adjacent to the fused three-pin IEC screen, so I would otherwise have found the the Velodyne CHT-12Q Subwoofer socket.) bright blue glow more than a little distracting. should continue on and read the Velodyne provides a full

Résumé du contenu de la page N° 3

tnempiuqe review Velodyne CHT-12Q Subwoofer test re su l t s Test Results Velodyne’s CHT-12Q Subwoofer proved to roll-off, so the re-inforcement between the have a very flat and extended response in the two is perfect. The roll-off below 30Hz is also Jazz/Classical position, which is shown in well-contoured. Graph 1. This trace, measured at three metres, Graph 3 shows the equalisation applied using pink noise as the test signal, is shown by using the different presets, as well as the unsmoo