Résumé du contenu de la page N° 1
INSTRUCTION
MANUAL
Intense Light
Color Dome Camera
VL647iLT
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 6/9/10
Résumé du contenu de la page N° 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SER VICEABLE PARTS INSIDE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Résumé du contenu de la page N° 3
Contents 3 Contents Precautions 4 5 Sefety Instructions 6 SPECIFICATIONS 7 FEATURES 8 FEATURES 9 Menu Set Up ▶Menu Set Up 11 ▶Lens Set Up 12 13 ▶Exposure 15 ▶Back Light ▶S-WDR 18 19 ▶White Bal. ▶Day & Night 20 ▶S-DNR 21 ▶Special 22 ◈Camera Title 23 ◈D - Effect 25 27 ◈Motion ◈Privacy 28 ◈Return 29 ▶Adjust 29 ▶Reset 30 30 ▶Exit 31 Trouble Shooting - 3 -
Résumé du contenu de la page N° 4
Precautions Do not install the camera in Do not install the camera under Do not touch the front lens of the extreme temperature conditions. unstable lighting conditions. camera. Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly. camera. Be careful not to leave -10°C and +50°C. Be especially careful to provide fingerprints on the lens cover. ventilation when
Résumé du contenu de la page N° 5
Sefety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera Please handle this camera carefully : ◑ Do n
Résumé du contenu de la page N° 6
Intense Light Color Dome Camera DC Auto Iris Varifocal Lens(2.8mm-12mm) ■ VL647iLT 580TV Lines DC Auto Iris Varifocal Lens(2.8mm-12mm) SLC Speco Light 0.00001LUX x256 Compensation 580 SPECIFICATIONS MODEL VL647iLT 1/3” Sony Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels Effective Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Scanning System 2:1 Interlace Synchronization Internal O.S.D Available Backlight SLC / HLC / Off Selectable Resolution 580TV Lines S/N (
Résumé du contenu de la page N° 7
FEATURES HIGHT RESOLUTION Horizontal resolution of 580 TV lines is achieved by using a SONY Super- HAD CCD with 410,000 pixels, and a custom DSP yielding images with a high S/N ratio. Day / Night The camera can be configured to either display color images in all lighting conditions or be set automatically switch to B/W in low light conditions. INTENSE-LIGHT 1/3 inch high-density CCD and Digital Signal Processor permit high quality image to be captured in very low light conditions. S-WDR (Spec
Résumé du contenu de la page N° 8
FEATURES HLC (High Light Compensation) This function reverses bright spots in the picture (such as headlights). It enables the entire system to do a better job of resolving and displaying grayscale information such as license plate. FREEZE This function freezes the current scene for detailed viewing. PRIVACY It also has the ability to mask up to 8 areas of the picture where viewing is not desired. Each zone can be independently programmed via the OSD. OSD All camera functions are menu driven
Résumé du contenu de la page N° 9
Menu Set-Up SET UP MENU DEFAULT SET MENU LENS DC DC : LEVEL (0 ~100 Adjustable) SHUTTER : FLK/ 1/60 / 1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000 AGC : OFF / LOW / MIDDLE/ HIGH SHUTTER INTENSE-LT : x2~ x256 Level Selectable AGC: --- SLC : OFF / SLC (GAIN : LOW, MIDDLE, HIGH/ DEFAULT : INTENSE-LT LEFT/RIGHT, WIDTH, TOP/ EXPOSURE SLC BOTTOM, HEIGHT, RTURN) / S-WDR HLC (LEVEL : RANGE 0~8 Selectable/ DEFAULT : RETURN LEFT/RIGHT, WIDTH, TOP/BOTTOM, HEIGHT, RETURN) S-WDR : OFF / INDOOR/ OUTDOOR
Résumé du contenu de la page N° 10
Special Menu SPECIAL MENU DEFAULT SET MENU CAMERA TITLE ON ON / OFF D - EFFECT ON FREEZE / MIRROR/ D-ZOOM/ GAMMA/ NEG. IMAGE /RETURN AREA SELECT : AREA 1~AREA 4 MOTION OFF AREA DISPLAY : ON / OFF LEFT / RIGHT : 0 ~ 100 Level Adjustable WIDTH : 0 ~ 100 Level Adjustable TOP / BOTTOM : 0 ~ 100 Level Adjustable HEIGHT : 0 ~ 100 Level Adjustable SENSITIVITY : 0 ~ 40 Level Adjustable MOTION VIEW : ON / OFF RETURN AREA SELECT : AREA 1~AREA 8 PRIVACY OFF AREA DISPLAY : ON / OFF LEFT / RIGHT : 0 ~ 100 Le
Résumé du contenu de la page N° 11
Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. SETUP LENS DC EXPOSURE WHITE BAL ATW DAY / NIGHT COLOR S-DNR ON SPECIAL ADJUST RESET EXIT 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. SETUP LENS DC EXPOSURE WHITE BAL ATW DAY / NIGHT COLOR S-DNR ON SPECIAL AD
Résumé du contenu de la page N° 12
3. Changing menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After completing the setting move the arrow indicator to EXIT and press the SET button to EXIT. NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol is display "- - - -" Lens 1. Move the arrow indicator to LENS using
Résumé du contenu de la page N° 13
NOTE * When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100. Lens BRIGHTNESS 100 RETURN 3. Press the RETURN to return to the SETUP menu. Exposure This function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select the desired shutter mode by pressing the Left or Right button. SETUP LENS DC EXPOSURE WHITE BAL ATW DAY / NIGHT COLOR S-DNR ON SPECIAL ADJUST RESET EXIT
Résumé du contenu de la page N° 14
EXPOSURE SHUTTER FLK BRIGHTNESS - - - - INTENSE-LT HIGH SLC AUTO S-WDR SLC RETURN OFF NOTE * To produce better results with FLK, do not use it in conjunction with the S-WDR mode in the BACKLIGHT menu. * Desired shutter speed can be selected by user 1/60, 1/250, 1/500, 1/2000, 1/5000, 1/0000, 1/100000, FLK . * Brightness just can operate when selected the Manual mode(Option), When selected DC mode, brightness will be disabled . * AGC(AUTO GAIN CONTROL): A higher gain increases brightness but a
Résumé du contenu de la page N° 15
* RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu. NOTE * Pressing the SET button in AUTO mode allows adjustment of image brightness by increasing or decreasing the shutter speed (x2 ~x258). * The higher the level, the brighter the image becomes, but it is possible that an after image (ghosting) could appear. * When INTENSE-LT is activated the increased magnification can induce noise and pixelation; this is quite normal. Back Light(SLC) This
Résumé du contenu de la page N° 16
SLC ON SLC OFF 3. Select a mode using the Left and Right buttons then press the SET button. Select SLC to adjust the desired SLC area and GAIN level. * GAIN : Adjust the SLC sensitivity by selecting LOW, MIDDLE or HIGH. * DEFAULT : Press the Default to back to the factory default when input the wrong data . ① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right button from 0 ~ 7 cells. SLC GAIN LOW DEFAULT LEFT / RIGHT 7 WIDTH 8 TOP / BOTT
Résumé du contenu de la page N° 17
* Move the arrow indicator to RETURN and press the Set Up button after complete the SLC area set to return to EXPOSURE menu. 4. Select HLC by using the Left and Right buttons then press the Set Up button to set up the desired HLC area and GAIN level. HLC OFF HLC ON * LEVEL : Adjust the HLC sensitivity by selecting between 0~8. * DEFAULT : Press the Default to return to the factory default when input the wrong data . ① Move the arrow indicator to select the WIDTH of cells to increase or decreas
Résumé du contenu de la page N° 18
S-WDR This camera provides intelligent light level control to overcome even strong backlight conditions. 1. Move the arrow indicator to S-WDR using the Up or Down button on the EXPOSURE menu screen. 2. Select the desired feature by using the Left or Right button. EXPOSURE SHUTTER 1/60 BRIGHTNESS - - - - AGC LOW INTENSE-LT - - - - SLC SLC S-WDR OFF RETURN * S-WDR : When there are simultaneous brightness & dark image areas S-WDR makes both distinct and can be selected desired feature between OUTD
Résumé du contenu de la page N° 19
White Balance The White Balance function is used to control the “on-screen” color. 1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. SETUP LENS DC EXPOSURE WHITE BAL ATW DAY / NIGHT COLOR S-DNR ON SPECIAL ADJUST RESET EXIT * There are three user selectable White Balance settings available. * ATW : (Auto Tracking White Balance) Normal setting; when the color temperature range is from 1,800˚
Résumé du contenu de la page N° 20
Day / Night Picture can be displayed in either color or black and white. 1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen. SETUP LENS DC EXPOSURE WHITE BAL ATW DAY / NIGHT COLOR S-DNR ON SPECIAL ADJUST RESET EXIT 2. Select the desired mode using the Left and Right buttons. * COLOR : The picture is always displayed in color. * BW : The White Balance is automatically adjusted in a specific environment. * AUTO : The mode is automatically switches to color in normal conditi
