Résumé du contenu de la page N° 1
TX-NR636
AV RECEIVER
Basic Manual
Advanced Manual found here
http://www.onkyo.com/manual/txnr636/adv/en.html
En
Résumé du contenu de la page N° 2
Connections Step 1: Before Start About the Basic Manual Features Supplied Accessories The Basic Manual leads you through the fundamental steps The unit is designed to be connected in between the TV and to enjoy the AV Receiver from connections to TV, speaker the playback components such as Blu-ray disc player. Video Indoor FM antenna --- (1) system and playback components, to necessary functions signal from the playback devices will be sent through the unit for playback. As well as that, Basi
Résumé du contenu de la page N° 3
Connections Step 1: TV Personal computer HDMI IN HDMI OUT HDMI cable To use the ARC function, connect to the ARC compatible HDMI jack of the TV. HDMI OUT HDMI HDMI HDMI Blu-ray Disc/ OUT OUT OUT DVD player Game console Set-top box/Digital Satellite/Cable video recorder, etc. set-top box, etc. ¼ ¼ Select an appropriate assignment of the input jacks and input selector buttons. connection for your TV. Connecting the TV and players For how to make settings, see the Advanced Manual (http:// 1
Résumé du contenu de la page N° 4
Step 1: Connections the section 2 "2nd Step : Source Connection" of "Step 2: 3 Connection with turntable: If it uses an MM type Video signals input to the composite video input Setting Up". cartridge and does not have a built-in audio equalizer, jack or the COMPONENT VIDEO input jacks will be • To enjoy HDCP2.2 protected video, connect the player to connect it to the 3 PHONO jack. If the connected upconverted to HDMI signals and then output from the IN3 jack and the TV to the HDMI OUT MAI
Résumé du contenu de la page N° 5
Step 1: Connections 1 2 Front L Front R Connecting speakers 2 3 Important: The power cord must be connected only after all Center other connections are completed. 12 39F 6 45 78 1 2 Front speakers 3 Center speaker 4 5 Surround speakers 6 Subwoofer 7 8 Surround back speakers 9 F Height speakers If there is only one • 5.1 ch: 1 2 3 4 5 6 surround back • 7.1 ch: 1 2 3 4 5 6 + 7 8 or 1 2 3 4 5 6 + speaker, connect 9 F it to the BACK or • 2 ch: 1 2, 3 ch: 1 2 3, 4 ch: 1 2 4 5 HEIGHT L te
Résumé du contenu de la page N° 6
Step 1: Connections connection is wrong, a bass sound may become poor due to Network connection Setting Up Step 2: Other connections reverse phase. Attaching the supplied colored speaker cable 3 labels to the + side on the both ends of each channel's cable You can enjoy Internet radio and DLNA by connecting the will help correct connection. The subwoofer jack supports unit to LAN. The unit can be connected to the router with an connection of a subwoofer with built-in power amplifier. Set
Résumé du contenu de la page N° 7
Setting Up Step 2: Important: When the unit is turned on for the first time, the 1st Step : AccuEQ Room Calibration setup wizard of the section 2 will automatically be launched. Making the Initial Setup with the Setup 2 The test tone coming from each speaker will be measured to If you use the setup wizard to make the initial setup, enable setting of the number of speakers, volume level, each Wizard connect a TV to the HDMI OUT MAIN jack of the unit via speaker's optimum crossover frequ
Résumé du contenu de la page N° 8
Step 2: Setting Up After placing the microphone at the measurement When "Please unplug setup microphone." is Select "Yes" with the cursors and press ENTER to 2. 7. 6. position, select "Do it Now" with the cursors and displayed, disconnect the microphone. enable the CEC link function or select "No" and press ENTER. press ENTER to keep it disabled. Connect the microphone to the SETUP MIC jack of 3. 2nd Step : Source Connection Source Connection the unit. You can check whether or not each in
Résumé du contenu de la page N° 9
Step 2: Setting Up Select and set the authentication method. Establish connection. 2. 3. 4th Step : Network Connection The connection process starts and the Wi-Fi indicator Wi-Fi Setup on the left of the unit's display starts flashing. When Initial Setup connection has been established, the Wi-Fi indicator Select the authentication method. Network Connection changes from flashing to staying lit. If the Wi-Fi indicator Do you want to connect network connection? It gives you network service
Résumé du contenu de la page N° 10
Playing Back Step 3: Remote controller parts name 1 Playing the player and TV 1 1 RECEIVER button: Turns the unit on or into standby z mode. 2 2 RCV button: Switches the remote controller to the mode for operating this unit. 3 8 3 REMOTE MODE/INPUT SELECTOR button: Switches the input to be played. 4 Cursor buttons and ENTER button: Moves the cursor 9 and confirms the selection. To control the unit: You can control any other device 5 Q SETUP button: Displays the Quick Setup menu that th
Résumé du contenu de la page N° 11
Step 3: Playing Back Muting Temporarily: Press MUTING on the remote Listening modes Listening to AM/FM Radio controller. Press MUTING again to cancel muting. 2 Select the desired mode by switching and listening actual Changing the Display Brightness: Press DIMMER on sound in different modes. The selectable listening modes the remote controller several times to select the desired The Basic Manual explains the method using automatic depend on the format of the input signals. brightness.
Résumé du contenu de la page N° 12
Step 3: Playing Back desired sub window with the cursor buttons and press Playing sound of the Bluetooth-enabled device Connecting and playing the Bluetooth- ENTER. 3 • A black sub window is shown for the input with no video If the unit is on and the Bluetooth-enabled device is enabled device signals. connected, the input will be automatically switched to • "InstaPrevue" cannot be selected if the video is being BLUETOOTH. Play music in this state. You can wirelessly enjoy music files sto
Résumé du contenu de la page N° 13
Step 3: Playing Back AccuEQ Room Calibration: Disables the sound field the image quality will not be adjusted. In "Custom", you Using Quick Setup menu correction setting set in the automatic speaker setting. can adjust the brightness, contrast, hue and saturation 5 The setting can be separately set to each input. as desired. If you do not adjust the resolution and image • This setting cannot be selected if the automatic quality, select "Bypass". In the Quick Setup menu, you can set frequent
Résumé du contenu de la page N° 14
Step 3: Playing Back Connect the ZONE2 LINE OUT jacks of the unit and the • Adjust the volume on this unit. To adjust the volume, Using the ZONE function line-in jacks of the pre-main amplifier in a separate room press ZONE2 on the remote controller and adjust with 6 with an analog audio (RCA) cable. VOL /. You can mute the sound by pressing MUTING. You can connect the unit with a pre-main amplifier or speakers in a separate room and playback audio sources Performing ZONE playback from a
Résumé du contenu de la page N° 15
1 24 3 57 6 8 9 F G H I J K L (European, Australian (European, Australian and Asian models) and Asian models) M N O P Q R ST Front Panel 1 zON/STANDBY button: Turns the unit on or into F MEMORY button: Registers or deletes a station. N PHONES jack: Stereo headphones with a standard plug standby mode. G TUNING MODE button: Switches the tuning mode. are connected. 2 BLUETOOTH indicator: Flashes while pairing with a H DISPLAY button: Switches the information on the O AUX INPUT HDMI/MHL jacks: An
Résumé du contenu de la page N° 16
1 2 3 46 5 7 14 23 5 6 7 Troubleshooting 98 Display 1 Lights in the following conditions. "Z2": ZONE 2 output is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. / "3D": Input signals are 3D. / "USB" (¼): "USB" input is selected and USB storage device is connected. / "NET" (¼): "NET" input is (Taiwanese model) selected and the unit is connected to the network. / "DIGI
Résumé du contenu de la page N° 17
Troubleshooting HDMI control does not function correctly. Resetting the unit Before starting the procedure Problems may be solved by simply turning the power • Set the CEC link function of the unit to on. It is also Resetting the unit to the status at the time of shipment may on/off or disconnecting/connecting the power cord, necessary to make the HDMI linked system setting on solve the problem. If the measures above do not solve the which is easier than working on the connection, the TV
Résumé du contenu de la page N° 18
Specifications Others Preset Channel HDMI Amplifier Section 40 Input IN1 (BD/DVD, 4K), IN2 (CBL/SAT, 4K), IN3 (STB/DVR, 4K, HDCP2.2), IN4 Rated Output Power (GAME, 4K), IN5 (PC), IN6, AUX INPUT (HDMI/MHL) (front) Network Section All channels: Output 95 watts minimum continuous power per channel, 8 ohm loads, OUT MAIN (ARC, HDCP2.2), OUT SUB 2 channels driven from 20 Hz to 20 kHz, with a maximum total Ethernet LAN Video Resolution harmonic distortion of 0.08% (FTC) 10BASE-T/100
Résumé du contenu de la page N° 19
Others COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS License and Trademark Information OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. “MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or Company makes no representation or warranty of any kind, express or implied, registered trademarks of MHL LLC in the United States and other counties.” about the completeness, accuracy, validity, le
Résumé du contenu de la page N° 20
– Par la présente, Onkyo Corporation déclare que l’appareil TX-NR636 est – Onkyo Corporation izjavlja, da je ta TX-NR636 v skladu z bistvenimi conforme aux exigences essentielles et aux autres dispositions pertinentes zahtevami in drugimi relevantnimi določili direktive 1999/5/ES. de la directive 1999/5/CE. – Onkyo Corporation vakuuttaa täten että TX-NR636 tyyppinen laite on – Con la presente Onkyo Corporation dichiara che questo TX-NR636 è direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
