Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
BV7280 OWNER’S MANUAL Mobile Audio/Video System PLL Synthesizer Stereo Radio Automatic Memory Storing RBDS Operation Full Detachable Panel Preset Equalization Memory Card Interface USB Interface AV IN interface on the front panel Remote Control 1
Résumé du contenu de la page N° 4
CONTENTS INSTALLATION.................................................................................. 3 USING THE DETACHABLE FRONT PANEL .................................... 6 CONNECTIONS................................................................................. 7 LOCATIONS AND FUNCTION OF THE PLAYER............................. 8 LOCATIONS AND FUNCTION OF THE REMOTE CONTROL ......... 9 OPERATION ................................................................................
Résumé du contenu de la page N° 5
INSTALLATION Notes: Installing the unit Choose the mounting location where Be sure you test all connections first, and the unit will not interfere with the normal then follow these steps to install the unit. driving function of the driver. 1. Make sure the ignition is turned off, and Before finally installing the unit, connect then disconnect the cable from the the wiring temporarily and make sure it vehicle battery’s negative (-) terminal. is all connected up properly and th
Résumé du contenu de la page N° 6
INSTALLATION (1) Metal Strap; (2) Mounting Bolt; (3) Hex Nut; (4) Spring Washer; (5) Tapping Screw; (6) Plain Washer 10. Reconnect the cable to the vehicle battery’s negative (-) terminal. Then replace the outer trim ring and install the unit’s front panel (see the steps of “To Install the front panel”). (1) Dashboard (2) Tabs 7. Reconnect the wire harness and the Removing the unit antenna and be careful not to pinch any 1. Make sure the ignition is turned
Résumé du contenu de la page N° 7
INSTALLATION Side View showing Screw Holes marked T, N or S Screw Factory Radio Mounting Bracket Screw Dashboard or Console To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm) on each side. Note: The outer trim ring, sleev e and the metal strap are not used for method B installation.
Résumé du contenu de la page N° 8
USING THE DETACHABLE FRONT PANEL Precautions when handling To Detach the Front panel 1. Do not drop the control panel. 1. Press the release button on the left-top of 2. Do not put pressure on the display or the panel and pull off the control panel. control buttons when detaching or re-installing the control panel. 3. Do not touch the contacts on the control panel or on the main unit body. It may result in poor electrical contact. 4. If any dirt or foreign substances
Résumé du contenu de la page N° 9
WIRING CONNECTION Connector A 1. N.C. 2. BRAKE (PINK) 3. REAR VIEW (BROWN) 4. MEMORY +12V (YELLOW) 5. AUTO ANTENNA OUTPUT (BLUE) 6. N.C. 7. +12V (TO IGNITION KEY) (RED) 8. GROUND (BLACK) Connector B 1. REAR RIGHT SPEAKER (+) (VIOLET) 2. REAR RIGHT SPEAKER (-) (VIOLET/BLACK) 3. FRONT RIGHT SPEAKER (+) (GRAY) 4. FRONT RIGHT SPEAKER (-) (GRAY/BLACK) 5. FRONT
Résumé du contenu de la page N° 10
OPERATION LOCATION OF KEYS Open the cover 12. BND/AMS 1. (Release button) 2. Volume knob (when rotated) 13. EQ/TA Push SEL (when pressed) 14. 3. PTY/AF 15. 4. 3.2 inch TFT display 16. MODE 17. CLOCK 5. 1 6. 2 18. USB/SD cover 7. 3 OSD 19. USB interface 8. 4 RPT 20. Memory card interface 9. 5 RDM 21. Remote Sensor 10. 6 SUB-T 22. AV IN jack
Résumé du contenu de la page N° 11
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 9
Résumé du contenu de la page N° 12
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 1. In audio file play mode, press to play all Press it to turn on the unit. When the unit tracks in random order. 10. VOL+/VOL- is on, press it to turn the unit off. Press to increase/decrease the volume 2. MODE level. When the unit is on, press it to select the 11. AUDIO different mode, such as RADIO, USB, In video play mode, press shortly to SD, AV IN mode. display the audio information of the file. 3. BAND/SYS In
Résumé du contenu de la page N° 13
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 21. ZOOM Press to allow the picture to be increased in size. 22. SELECT Press to enter to inthe system setup menu. 23. SEEK- / SEEK+ Press shortly to skip to the previous/next track. Press and hold it to activate fast reverse/forward function. In radio mode, press it shortly to search the frequency backward/forward manually. Press and hold it to seek the frequency automatically. Preparing the Remote C
Résumé du contenu de la page N° 14
OPERATION BASIC OPERATION ◆ Turn the unit on/off BRIGHTNESS CONTRAST When all the connection is finished, SHARTPNESS press MUT button on the front panel or COLOR on the remote control will turn the unit HUE RESET on. When the unit is on, hold press MUT button or press to turn the unit off. Then press / buttons on the front ◆ Faceplate release panel or on the remote control to select Press the release bu
Résumé du contenu de la page N° 15
OPERATION Pressing MUT button on the front function and some dat a will never lose even when power's off. You can press the panel or MUTE button on the remote numerical button 1, 3, 6 on the front panel control will mute the sound. Press it of the unit in succession then hold press again will resume the sound. 4 button to clear the power-down memory ◆ Mode selection function and “EEP INNT” will appear. Press MODE button on the front panel or MODE on the remote control to US
Résumé du contenu de la page N° 16
OPERATION Shortly press again will return to the ◆ Multi-subtitle language function (For normal playback. Video file) Press SUB-T button on the remote ◆ Rapid forward / rapid reverse Hold press / on the front panel control or SUB-T button on the front or hold press / on the remote panel during playback. The control during playback. corresponding information will be shown on the screen. Each time the button is hold pressed, the Each time the button is pressed, t
Résumé du contenu de la page N° 17
OPERATION 1) SYSTEM SETUP b) Press / , / cursor When you open the setup menu, you buttons on the remote control to will see the system setup page at first, select the items you want to program. see below: The items you selected will bec ome SYSTEM SETUP highlight. TV SYSTEM c) Input the number you want to AUTO PLAY VIDEO program by numeric buttons (0-9) TV TYPE PASSWORD on the remote control. RATING Use cursor buttons to select DEFAULT PLAY on the bot
Résumé du contenu de la page N° 18
OPERATION DIGITAL SETUP 3) AUDIO SETUP OP MODE When you open the AUDIO menu, DYNAMIC RANGE DUAL MONO you will see the following picture: AUDIO SETUP * OP MODE: to set the operating AUDIO OUT modes for Dolby Digital decoder, KEY there are LINE OUT and RF REMOD to be selected. * DYNAMIC RANGE: you can adjust *AUDIO OUT: Change among SPDIF/OFF, the dynamic range between OFF, 1/8, SPDIF/RAW and SPDIF/PCM. 2/8. 3/8, 1/2, 5/8, 3/4, 7/8, f
Résumé du contenu de la page N° 19
OPERATION FM3, AM1 and AM2 band. The operation the audio/video/photo files in the card and is as below: start to play automatically. The operation is 1) Store in Memory the same with the USB operation described Press and hold desired radio preset above. buttons (numeric buttons 1~6) on the If in other mode, you can also press MODE remote control or on the front p anel for button to select Card mode. several seconds, the memory icon will The corresponding operation please
Résumé du contenu de la page N° 20
OPERATION AV IN OPERATION ◆ Local/Distant On the front panel of the unit, there is an Press LOC button on the remote control to AV IN jack. When you connected the select between local and distant stations. audio/video device from the jack, press Local setting for reception of strong MODE button on the remote control or station, and a distant setting for reception MODE on the front panel to select AV IN of weaker stations. mode. ◆ RBDS OPERATION 1) In
