Résumé du contenu de la page N° 1
Stereo Radio, CD-R/RW Player
with Dual Alarm Clock
OWNER'S MANUAL
CKD9906
Visit our web site at www.emersonradio.com
CKD9906_071905.p65 27 19/7/2005, 14:24
Résumé du contenu de la page N° 2
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- The exclamation point within WARNING: TO REDUCE THE head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
Résumé du contenu de la page N° 3
Before We Begin Thank you for purchasing this Emerson audio product. The Emerson brand is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this owner's manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and found to be in perfe
Résumé du contenu de la page N° 4
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning ‘On’ the power, make electric heaters, on top of other stereo certain that the power cord is properly equipment that radiates too much installed. When moving the set, be heat, places lacking ventilation or sure to first disconnect the power cord. dusty areas, places subject to constant • Store
Résumé du contenu de la page N° 5
PREPARATION FOR USE Unpacking And Set Up • Remove the unit from the carton, and remove all packing materials from the unit. • Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment. • Remove any descriptive labels or stickers from the top or front of the unit. Do not remove any labels from the back or bottom of the cabinet. • Remove any small strip
Résumé du contenu de la page N° 6
Power Source This system is designed to operate on 120V AC 60Hz house current only. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty. Note: The system has polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlet, you probably have an outdated non
Résumé du contenu de la page N° 7
Battery Back Up System This unit uses a single 9-Volt battery (not included) to maintain the time and alarm settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a well-known brand of Alkaline battery for longest life and best performance. To keep the battery back up system operational you should install a new battery every 6 to 9 months. Some people find it convenient to replace the back up batteries in their alarm cl
Résumé du contenu de la page N° 8
LOCATION OF CONTROLS AND INDICATORS Top Panel 8 7 9 10 11 6 12 13 14 15 16 5 17 5 18 4 19 3 2 20 21 1 22 23 Front Panel 26 27 28 25 24 29 33 32 31 30 7 CKD9906_071905.p65 7 19/7/2005, 14:26
Résumé du contenu de la page N° 9
1.) SNOOZE Button. 2.) BUZZER-CD-FM ST-AM Selector Switch. 3.) Power ‘On’ Indicator. 4.) POWER(On/Off)/ALARM OFF Button. 5.) Speakers. 6.) CD compartment. 8.) AC Power Cord. 7.) Back Up Battery Compartment (At bottom cabinet). 9.) FM Wire Antenna. 10.) VOLUME Control. 11.) TUNING Control. 12.) Play/Pause Button. 13.) Stop Button. 14.) CD Door OPEN/CLOSE Area. 15.) Skip Search Forward/HR.(Hour) Button. 16.) Skip Search Reverse/MIN.(Minute) Button. 17.) P-MODE Button. 18.) PROGR
Résumé du contenu de la page N° 10
OPERATING INSTRUCTIONS Setting The Time Of Day • Connect the power cord to your AC outlet. Make sure to use an outlet that is always ‘ live’ . Do not use an outlet that is controlled by a wall switch. PM • When the unit is plugged in for the first time the ALARM 1 display will show flashing “12:00” (AM). ALARM 2 1.) While the display is flashing, press the HR. button to set the hour. Be sure to observe the PM indicator to set the hour correctly. If the PM indicator is ‘ On’ the hour displa
Résumé du contenu de la page N° 11
Setting The Wake Up Times The unit has two separate wake up alarms that can be set and used independently. 1.) Press the AL 1 or AL 2 button once. The display will change from the respective time of the day to wake up time and begin flashing. The ALARM 1 or ALARM 2 indicator comes “On”. 2.) Press the HR. button to set the wake up hour. Set correctly for AM or PM. 3.) Press the MIN. button to set the minute correctly. . Press the respective AL button once. The Alarm time is set. The display ret
Résumé du contenu de la page N° 12
Listening To The Radio 1.) Press the POWER/ALARM OFF Button to turn the unit ‘ On’ . The Power indicator comes ‘ On’ . 2.) Set the BUZZER-CD-FM ST-AM selector to FM ST or AM position. 3.) Turn the TUNING control to find the desired station. If you slide the selector to FM ST position, and tune to a FM Stereo station, the FM STEREO indicator light comes ‘ On’ . FM STEREO PM ALARM 1 ALARM 2 4.) Adjust the VOLUME control to the desired level. 5.) When you are finished listening press the POWER/AL
Résumé du contenu de la page N° 13
Antenna Information AM The AM ferrite bar antenna is inside the cabinet. If AM reception is unsatisfactory try turning the entire unit slightly until you find the direction that provides the best reception for the desired station. FM Make sure the FM lead wire antenna is extended to it’s full length. You may have to vary the direction of the wire antenna to find the position that provides the best reception. 12 CKD9906_071905.p65 12 19/7/2005, 14:26
Résumé du contenu de la page N° 14
Playing Compact Discs Note: Although this CD player can read CD-R and CD-RW discs, in addition to normal CDs, however the playability of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. Normal Playback 1.) Press the POWER/ALARM OFF button to turn the unit ‘ On’ . The Power indicator comes ‘ O
Résumé du contenu de la page N° 15
5.) Two dashes “– –” flash while the player reads the table of contents of the disc. The display will show the total number of tracks for a few seconds and then return to the correct time. PM PM ALARM 1 ALARM 1 ALARM 2 ALARM 2 PM ALARM 1 ALARM 2 Note: If the disc is inserted incorrectly, or if the disc is badly scratched and cannot be read by the player, “no” will appear on the display for a few seconds, and then the display returns to the correct time. PM PM ALARM 1 ALARM 1 ALARM 2 ALARM 2 6.)
Résumé du contenu de la page N° 16
To Start Playback From A Specific Track Load your disc and wait until the display shows the total number of tracks. Press the or buttons to select the desired track. PM While the track number is still flashing press the ALARM 1 button. ALARM 2 Playback will begin on the selected track and continue until the end of the disc. High Speed Music Search You can search rapidly forward or backward within a track to locate a specific musical passage. Depress and hold the or buttons to begin high spe
Résumé du contenu de la page N° 17
Repeat Playback You can program the player to repeat a single track or the entire disc continuously. One Track Repeat 1.) Load your disc and wait until the total track number is displayed. PM 2.) Press the P-MODE button once. ALARM 1 The REPEAT indicator flashes. ALARM 2 3.) Press or button to select the track to be repeated. PM When the track number is still flashing, press ALARM 1 the button. The selected track will be ALARM 2 repeated continuously. All Tracks Repeat 1.) Load your disc and
Résumé du contenu de la page N° 18
Programmed Playback The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired. Note: Programming can only be done while the player is in the Stop mode. If a disc is playing press the Stop button to stop playback before performing the programming steps below. 1.) Turn the unit ‘On’, select the CD funct
Résumé du contenu de la page N° 19
7.) After you have programmed all the desired tracks press the button to begin programmed playback. The PROGRAM indicator stops flashing and remains ‘ On’ . Playback will begin on the first track you programmed and continue until all programmed tracks have been played. PM PM ALARM 1 ALARM 1 ALARM 2 ALARM 2 Notes: • After all programmed tracks have played the player stops but the program remains in the memory. Press the PROGRAM button and then the button to begin programmed playback again.
Résumé du contenu de la page N° 20
Alarm Operation This unit gives you the option of waking to an electronic Buzzer alarm, the AM/FM Radio, or the CD player. Note: Whichever alarm mode you select – BUZZER, CD, FM ST or AM – will apply to both alarms. Refer to “Setting The Wake Up Times” on page 10. Adjust the wake up time(s) if necessary. 1.) Set the BUZZER-CD-FM ST-AM selector to the desired wake up mode. 2.) Press the AL 1 and/or AL 2 buttons once. The respective alarm time flashes for few seconds, then returns to correct time.
