Résumé du contenu de la page N° 1
MINI SYSTEM STEREO AM/FM
3 CD CHANGER WITH DUAL
CASSETTE RECORDER
MODEL: MX5310
BEFORE OPERATING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS COMPLETELY
E-1
Memorex.p65 1 11/8/01, 11:11 AM
Résumé du contenu de la page N° 2
WARNING: To reduce the risk of fire or electric shock, do not expose it is appliance to rain or moisture. CAUTION: Use of controls or adjustments or performance of procedures other than those specificed may result in hazardous radiation exposure. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel The lightning flash with arrowhead symbol within an equilate
Résumé du contenu de la page N° 3
IMPORTANT SAFEGUARDS CAUTION : • Read all of these instructions. • Save these instructions for later use. • Follow all warnings and instructions marked on the audio equipment. 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the product and in the operating instructions should be adhered to. 4. FOLLOW I
Résumé du contenu de la page N° 4
15. OUTDOOR ANTENNA GROUNDING If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70 provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grou
Résumé du contenu de la page N° 5
CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT IN CABINET OR IN ANOTHER CONFINED SPACE IN ORDER TO KEEP WELL VENTILATED CONDITION. ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION CONDITION
Résumé du contenu de la page N° 6
LOCATION OF CONTROLS 1. CD Door 2. Disc skip button 3. Disc number button 4. CD Open / Close button 5. CD stop button 6. CD Play / Pause button 7. Remote sensor 8. Standby indicator 9. Display 10. Power button 11. Clock adjust button 12. Volume control 13. Headphone jack 14. Sleep button 15. CD button 16. Tuner button 17. Band button 18. Remain button 19. Random button 20. Repeat button 21. Program button 22. Tuner up / CD skip track (Forward) / Search button 23. Preset EQ button 24. Preset up b
Résumé du contenu de la page N° 7
LISTENING TO THE RADIO Manual tuning 1. Press the TUNER button to select tuner mode. 2. Press the BAND SELECT button to the desired band. a) For FM Stereo reception: The unit provides FM MONO / STEREO selector (combined with Beat Cut selector). In Stereo mode, the unit will automatically switch to stereo when an FM stereo broadcast is received and stereo mark turn on in the display. b) For FM MONAURAL (MONO) reception: To receive weak (noisy) FM station, to set FM MONO / STEREO selector to MONO
Résumé du contenu de la page N° 8
TO INTERRUPT PLAYBACK: 1. Press the PLAY / PAUSE button. • “ “ will appear. 2. Press the PLAY / PAUSE button to resume playback from the same point. TO STOP PLAYBACK: Press the STOP button. TO REMOVE THE CDs: Whilst in the stop mode, press the OPEN / CLOSE button. • The disc tray will open. Remove the two discs. Then press the DISC SKIP button to rotate the disc tray and remove the remaining disc. SKIP SEARCH The skip search function allows you to “SKIP” tracks in the forward or reverse directio
Résumé du contenu de la page N° 9
PROGRAMME PLAYBACK Use this function to programme the CD player to playback tracks in the order that you like. Up to 20 tracks can be programmed. Programme play is operated with the remote control or cabinet. 1. Press the PROG button If a disc(s) has already been loaded, the CD player will go directly to the programming mode and the “PROG” indicator will show on the system display. The disc number displayed indicates the disc that is ready to be programmed. Before proceeding: When more than one
Résumé du contenu de la page N° 10
INSERTION AND REMOVAL OF CASSETTE – Press Stop / Eject Key to open the cassette door. – Put your cassette tape down the holder properly, with the exposed section Downward and the playback side facing you. – Close the cassette door securely before starting. – When finished press Stop / Eject Key to open the cassette door and retrieve your cassette tape. PLAYBACK – You can choose either TAPE A / 1 or TAPE B / 2 for playback. – Press the TAPE Button. – Put in your cassette tape. – Press Play Key to
Résumé du contenu de la page N° 11
CLOCK SETTING • Press the CLOCK set button twice. – The hours start flashing. • Press the TUNING Button ( or ) to adjust the hours. • Press the CLOCK Set button again. – The Minutes start flashing. • Press the TUNING Button ( or ) to adjust the minutes. • Press the CLOCK Set button or wait a few seconds and the clock will start running. TIME DISPLAY FORMAT: • All the time information is shown in either 12h or 24h format. – Pressing and holding the Clock button for some seconds will access the ti
Résumé du contenu de la page N° 12
SLEEP TIMER The sleep timer is a countdown timer for switching the system to standby mode after a specified time. It enables you to listen to the radio, a CD or a cassette prior to falling asleep. The sleep timer can be set from 120 to 15 minutes. • Switch on the system by pressing the STANDBY (power) button, either on the system or on the remote control. – The STANDBY indicator disappears. • Select the sound source by pressing TAPE, TUNER / BAND, AUX or CD. • Press the SLEEP button to set the s
Résumé du contenu de la page N° 13
REMOTE CONTROL TRANSMITTER CONTROL FUNCTIONS BATTERY INSTALLATION The infrared transmitter requires 3.0 volts for operation. BUTTON DESCRIPTION 1. POWER button – To switch the unit to standby mode. 2. Function Mode CD – Press to select CD mode. TAPE – Press to select TAPE mode. TUNER (BAND) – Press to select TUNER mode and select the desired waveband. AUX – Press to select AUX mode. 3. PROGRAM – To program CD tracks or radio preset stations. 4. DISC SKIP – Press once to select the desire CD. 5.
Résumé du contenu de la page N° 14
TROUBLESHOOTING GUIDE BEFORE REQUESTING SERVICE, PLEASE REFER TO THE FOLLOWING CHART FOR THE SYMPTOM AND POSSIBLE SOLUTION. SYMPTOMS POSSIBLE CAUSES POSSIBLE SOLUTIONS CD PLAYER CD PLAYER WILL NOT FUNCTION SELECTOR SWITCH SET FUNCTION SELECTOR OPERATE NOT SET TO CD POSITION SWITCH TO CD POSITION. CD NOT INSTALLED OR INSERT CD WITH LABEL SIDE UP. INSTALLED UPSIDE DOWN. CD SKIP WHILE PLAYING. DISC IS DIRTY OR SCRATCHED. WIPE DISC WITH A SOFT CLOTH OR TRY ANOTHER DISC. RADIO FM STEREO INDICATOR ST
Résumé du contenu de la page N° 15
LIMITED WARRANTY AUDIO/PHONES We at MEMOREX believe you will be pleased with your new Product. Please read this Warranty carefully. Memorex warrants this product to be free from manufacturing defects including original parts and workmanship for a period of ninety (90) days from the date of original purchase in, and if used in, the United States. Should you find your unit is not operating properly during the terms of full coverage of this warranty, ninety (90) days, you should contact your origin
Résumé du contenu de la page N° 16
MPD8845.O/M.QXD 6/25/02 11:55 AM Page 23 Memcorp, Inc. Weston, Fl Printed in Hong Kong Visit our website at www.memcorpinc.com
