Résumé du contenu de la page N° 1
VQT3D27~Cover_eng.fm 1 ページ ２０１１年１月６日 木曜日 午後１時２１分
Owner’s Manual
TM
Blu-ray Disc Home Theater Sound System
Model No. SC-BTT770
SC-BTT370
SC-BTT270
SC-BTT273
The illustration shows the image of the unit SC-BTT770.
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
If you have
Résumé du contenu de la page N° 2
VQT3D27~Safety_eng.fm 2 ページ ２０１０年１２月２７日 月曜日 午後４時１４分 [BTT770] THE FOLLOWING APPLIES ONLY IN THE U.S.A. THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This equipment has been tested and found to comply with the limits for a These limits are designed to provide reasonable protection against Class B digital device, pursuant to Part 15 of the FCC Rul
Résumé du contenu de la page N° 3
VQT3D27~Safety_eng.fm 3 ページ ２０１０年１２月２７日 月曜日 午後３時５７分 IMPORTANT SAFETY CAUTION INSTRUCTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed CAUTION: TO REDUCE THE RISK OF ELECTRIC below. Keep these operating instructions handy for future reference. SHOCK, DO NOT REMOVE SCREWS. 1 Read these instructions. NO USER-SERVICEABLE PARTS 2 Keep these instructio
Résumé du contenu de la page N° 4
SC-BTT770_370_270P_eng.book 4 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 Table of contents IMPORTANT SAFETY INSTRUCTIONS ......... 3 Getting started Radio Accessory......................................................... 5 Listening to the Radio..................................... 29 •Presetting stations automatically ................................... 29 Control reference guide.................................... 6 •Presetting stations manually.......................................... 29 •Remote control
Résumé du contenu de la page N° 5
VQT3D27~Body_mst.fm 5 ページ ２０１１年１月７日 金曜日 午前９時３６分 Getting started Indicates features applicable to: ≥ This Owner’s Manual is applicable to models : SC-BTT770 only [BTT770] SC-BTT770, SC-BTT370, SC-BTT270 and SC-BTT273. SC-BTT370 only [BTT370]: Unless otherwise indicated, illustrations in this Owner’s [BTT270]: SC-BTT270 only Manual are of SC-BTT770. SC-BTT273 only [BTT273]: ≥ Operations in this Owner’s Manual are described mainly with the remote control, but you can perform the operations
Résumé du contenu de la page N° 6
SC-BTT770_370_270P_eng.book 6 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 Control reference guide 13 Remote control 1 1 Turn the unit on and off 2 Select title numbers, etc./Enter numbers or characters ( 34) [CANCEL]: Cancel 3 Select the source ( 22) 2 14 4 Basic playback control buttons ( 25) 5 Select preset radio stations 6 Show status messages ( 25) 7 Display the Home screen of VIERA CAST ( 34) 15 8 Selection/OK, Frame-by-frame ( 25) 3 9 Show sub menu ( 26) 16 10 These buttons are used when; TM ≥ Opera
Résumé du contenu de la page N° 7
VQT3D27~Body_mst.fm 7 ページ ２０１１年１月５日 水曜日 午前１１時１４分 Main unit (Front) 123 POWER OPEN/CLOSE VOL Pull open. iPod SD CARD 4561 7 890 6 Start play ( 25) 1 Standby/on switch (POWER Í/I) ( 19) 7 SD card slot ( 22) Press to switch the unit from on to standby mode or vice 8 Remote control signal sensor versa. In standby mode, the unit is still consuming a small Distance: Within approx. 7 m (23 ft.) amount of power. o Angle: Approx. 20 up and down, 30 o left and right 2 Open or close the disc tray (
Résumé du contenu de la page N° 8
SC-BTT770_370_270P_eng.book 8 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 Playable discs/Cards Logo Playable contents Type Type detail examples ( 49) BD-Video Video Video [BD] BD-RE JPEG/MPO (3D still picture) BD-R Video DVD-Video Video DVD-R Video AVCHD [DVD] MP3 JPEG/MPO (3D still picture) DVD-R DL DVD-RW Video AVCHD — +R/+RW/+R DL Music CD Music [CD-DA] [CD] Music [CD-DA] CD-R — MP3 CD-RW JPEG/MPO (3D still picture) SD Memory Card (8 MB to 2 GB) SDHC Memory Card (4 GB to 32 GB) MPEG2 [SD] SDXC Memory Card
Résumé du contenu de la page N° 9
SC-BTT770_370_270P_eng.book 9 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 ∫ SD card ∫ Finalize DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by ≥ miniSD Cards, microSD Cards, microSDHC a recorder, etc. needs to be finalized by the recorder to play on Cards and microSDXC Cards can be used, but this unit. Please refer to the recorder’s instructions. must be used with an adaptor card. These are usually supplied with such cards, or otherwise ∫ BD-Video customer provided. ≥ Keep the Memory Card out of reach
Résumé du contenu de la page N° 10
VQT3D27~Body_mst.fm 10 ページ ２０１１年１月６日 木曜日 午後１時３３分 STEP 1 : Preparing the speakers [BTT770] ∏ 2 Front speakers ∏ 2 Bases ∏ 4 Screws A (RYK1610-K1) (XTN5 i10FFJK) ∏ 2 Stands (with cables) ∏ 3 Speaker cables ∏ 2 Screws B (RYK1609E-K: RED) (REEX1268: GREEN) (XYN5 iJ18FJK) (RYK1609D-K: WHITE) (REEX1269: GRAY) (REEX1270: BLUE) ∏ 2 Speaker cables (for SH-FX71) (REEX1155B-1: GRAY) (REEX1156B-1: BLUE) [BTT370] [BTT273] ∏ 2 Front speakers ∏ 5 Speaker cables ∏ 2 Screws A (REEX1266A: RED) (XTB4 i12GFJK) (
Résumé du contenu de la page N° 11
VQT3D27~Body_mst.fm 11 ページ ２０１１年１月６日 木曜日 午後１時３３分 [BTT370] [BTT273] Thread the speaker cable Insert the wire fully. through the base. r: White ≥ Use cables with a white connector s: Blue line and red connector. Push! Press into the groove. Back of the base Pull the cable straight along the Leave about 11 line and slide into the 110 mm (4 /32 q) groove. Tighten securely. Preparing cables and making connection 2 Connecting the speaker cables. Insert the 1 Use of the speaker cable stickers
Résumé du contenu de la page N° 12
SC-BTT770_370_270P_eng.book 12 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 STEP 2 : Positioning Caution ≥ The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. ≥ Do not attempt to attach these speakers to walls using methods other than those described in this m
Résumé du contenu de la page N° 13
VQT3D27~Body_mst.fm 13 ページ ２０１１年１月６日 木曜日 午後１時３３分 STEP 3: Connections Turn off all equipment before connection and read the appropriate owner’s manual. Do not connect the AC power supply cord until all other connections are complete. Speaker cable connection Connect to the terminals of the same color. [BTT770] Connection with the wireless system (SH-FX71) 6 PURPLE Subwoofer 3 BLUE Surround speaker (Lch) 5 GREEN Center speaker 4 GRAY Surround speaker (Rch) 2 RED Front speaker (Rch) ≥ Be sure to
Résumé du contenu de la page N° 14
SC-BTT770_370_270P_eng.book 14 ページ ２０１０年１２月１７日 金曜日 午後７時４４分 Connection to a TV ≥ The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize your system setting. ≥ Do not make the video connections through the VCR. Due to copy guard protection, the picture may not be displayed properly. ≥ Turn off all equipment before connection. ∫ OPTICAL IN ≥ After making the digital audio connection, make settings to suit the type of audio from
Résumé du contenu de la page N° 15
VQT3D27~Body_mst.fm 15 ページ ２０１１年１月６日 木曜日 午後１時３５分 Connection for the best picture and audio ≥ When connecting to a TV using an HDMI cable, check the HDMI terminal on the TV. If the HDMI terminal is labeled “HDMI (ARC)”, you can connect the unit simply with a single HDMI cable. ≥ It is possible to playback 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV. ≥ For details, refer to the operating instructions of your TV. ∫ When the HDMI terminal on the TV is labeled “
Résumé du contenu de la page N° 16
SC-BTT770_370_270P_eng.book 16 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 Connection with Set Top Box, etc. ∫ [BTT770] [BTT370] When the connecting devices have an HDMI terminal A HDMI cable (not supplied) e.g., B Set Top Box (Cable/Satellite), etc. TV C Other devices (Video game, etc.) ≥ Make sure that the HDMI cable connection is made to enjoy AV IN AV OUT AV OUT the videos from the Set Top Box, etc. Futhermore, select (ARC) “HDMI Input1” or “HDMI Input2” as a source. HDMI Standby Pass-Through ( 39)
Résumé du contenu de la page N° 17
SC-BTT770_370_270P_eng.book 17 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 [BTT770] Digital transmitter connection Do not insert or remove while the home DO DO NOT theater unit is on. Make sure that the digital transmitter is fully inserted. If the digital transmitter is not fully inserted, the sound may Insert fully until you not be available from the surround speakers. hear a click. Connection to a broadband network The following services can be used when this unit is connected to broadband. ≥ Firmware c
Résumé du contenu de la page N° 18
VQT3D27~Body_mst.fm 18 ページ ２０１１年１月６日 木曜日 午後１時３６分 STEP 4: AC power supply cord connection Connect only after all other connections are complete. AC IN [BTT770] Wireless System ≥ AC power supply cord Main unit with a ferrite core is for the wireless system. Do not use any other AC power supply cord except the supplied one. A AC power supply cord (supplied) A AC power supply cord (supplied) B To a household AC outlet B To a household AC outlet Main unit This unit consumes a small amo
Résumé du contenu de la page N° 19
VQT3D27~Body_mst.fm 19 ページ ２０１０年１２月２７日 月曜日 午後６時１７分 STEP 6: Easy setup The Easy setup assists you to make necessary 1 Press [ Í]. settings. Setup screen appears. Follow the on-screen prompts to make basic settings for the If this unit is connected to a Panasonic TV (VIERA) system. supporting HDAVI Control 2 or later via an HDMI cable, then setting information on the TV such as “On-screen Language” is acquired by this unit. 2 Follow the on-screen instructions and make the settings with [ 3
Résumé du contenu de la page N° 20
SC-BTT770_370_270P_eng.book 20 ページ ２０１０年１２月１６日 木曜日 午後９時５１分 ∫ “Search for wireless network” Network Easy Setting The available wireless networks will be displayed. 1 Select your network name and press [OK]. The configuration of your network is about to begin. If you ≥ If your network name is not displayed search again by failed to make the settings, refer to page 21 pressing the [R] button on the remote control. Stealth SSID will not be displayed, in this case enter manually. Wired connectio
