Résumé du contenu de la page N° 1
Technical overview
HP ProCurve Switch 5400zl, 3500yl, and
6200yl Series
Table of contents
Executive summary .............................................................................................. 4
Introduction .......................................................................................................... 4
Product positioning .............................................................................................. 5
Overview .........
Résumé du contenu de la page N° 2
Specifications ................................................................................................. 18 Management module .................................................................................. 18 Line interface modules ............................................................................... 19 HP ProCurve Switch 3500yl Series ................................................................... 24 Specifications ...............................................
Résumé du contenu de la page N° 3
Appendix C: Power over Ethernet ..................................................................... 47 PoE device types ............................................................................................ 47 Power delivery options ................................................................................... 48 PoE negotiation .............................................................................................. 48 Additional PoE power—external supplies .............
Résumé du contenu de la page N° 4
Executive summary HP ProCurve Networking has an extensive line of networking products built around the concept of the HP ProCurve Adaptive EDGE Architecture™ (AEA) that provides the security, mobility, and convergence capabilities that businesses demand while giving IT administrators the ability to adapt to the changing needs of their organizations and control their infrastructure centrally. This guide describes the HP ProCurve Switch 5400zl, 3500yl, and 6200yl series which are built up
Résumé du contenu de la page N° 5
Product positioning Overview A widely used method for segmenting the areas in which switches are installed calls for three different classifications: access, distribution, and core. Access switches provide aggregation of end nodes for connection to a distribution or core switch and are usually found in wiring closets. Distribution switches aggregate the links from access switches and possibly server farms. Distribution switches anchor the network in a building, or, for small networks, ac
Résumé du contenu de la page N° 6
• Diagnostic—remote intelligent mirroring, loopback interface, UDLD, sFlow support • Investment protection—upgradable management engine and CPU (for 5400zl and 8200zl Series), upgradable to Premium License feature group, add-in modules and power supplies (for 5400zl and 8200zl Series), Versatile Intelligent Ports, programmable ASICs HP ProCurve Switch 5400zl and 3500yl Series The HP ProCurve Switch 5400zl and 3500yl series consist of the most advanced intelligent edge switches in the H
Résumé du contenu de la page N° 7
Figure 1. ProVision ASIC Architecture for HP ProCurve Switch 5406zl The diagram above illustrates an example of the logical interconnection of the ProVision ASICs on the 6-slot 5406zl series switch. All of the key elements are connected to the active backplane. The active backplane contains the switch fabric and distributes power to all modules. The HP ProCurve Switch 5412zl, 3548yl, 3524yl, and 6224yl have similar architectural components. The primary difference in the illustrati
Résumé du contenu de la page N° 8
Policy Enforcement Engine The ProVision ASICs on each line interface module contain the Policy Enforcement Engine. This engine provides fast packet classification to be applied to ACLs, QoS, Rate Limiting, and some other features through an onboard TCAM. Some of the variables that can be used include source and destination IP addresses (can follow specific users), TCP/UDP port numbers, and ranges (apply ACLs to an application that uses fixed port numbers or ranges). Over 14 different vari
Résumé du contenu de la page N° 9
ProVision ASIC CPU Each ProVision ASIC contain its own CPU for learning of Layer 2 nodes, packet sampling for the XRMON function, handling local MIB counters, and running other module-related operations. Overall, the local CPU offloads the master CPU by providing a distributed approach to general housekeeping tasks associated with every packet. MIB variables, which need to be updated with each packet, can be done locally. The Layer 2 forwarding table is kept fresh through the use of this
Résumé du contenu de la page N° 10
HP ProCurve Switch 5400zl Series The HP ProCurve Switch 5400zl series is a high-end edge switch. This switch series has been designed to be a feature-oriented high-performance wiring closet switch. It can also be used as a low-to-medium distribution switch when used with Premium License, described later in this document. The 5400zl series is the latest generation of managed chassis products from HP ProCurve. The 5400zl series follows in the evolution of HP ProCurve managed chassis switc
Résumé du contenu de la page N° 11
ProCurve Switch 5400zl Chassis ProCurve Switch 5400zl Bundles ProCurve Switch 5406zl ProCurve Switch 5406zl-48G (J8699A) (J8697A) ProCurve Switch 5412zl ProCurve Switch 5412zl-96G (J8698A) (J8700A) Figure 2. HP ProCurve Switch 5400zl Chassis and Bundles The HP ProCurve Switch 5406zl-48G Intelligent Edge (J8699A) and 5412zl-96G Intelligent Edge (J8700A) are preconfigured bundles that offer a pretested environment and a lower cost starter switch to which additional modules can be
Résumé du contenu de la page N° 12
However, when the management module is removed, all ports lose communication and the system will be powered down. Figure 3. HP ProCurve Switch 5406zl chassis layout Figure 4. HP ProCurve Switch 5412zl chassis layout 12
Résumé du contenu de la page N° 13
The internal power supplies are inserted in the back slots. These slots are labeled PS1 and PS2 on the 5406zl and PS1 through PS4 on the 5412zl. A power supply is hot-swappable provided at least one other power supply is operational. If the 5412zl has only two power supplies and one of them fails, then only the upper six slots (slots A through F) will receive power. Power supplies There are two different power supplies available for the HP ProCurve Switch 5400zl series. Both power supp
Résumé du contenu de la page N° 14
Both internal supplies have over-current, over-temperature, and over-voltage protection, as well as integrated fans. Hot swapping is allowed, taking into account that disconnecting the power supplies may interrupt PoE operation. An external power shelf, the HP ProCurve Switch zl Power Supply Shelf, is available to house up to two switch zl power supplies. The power shelf supplies can be connected to one or two switch zl’s to provide additional PoE power, either to power additional PoE-p
Résumé du contenu de la page N° 15
In the event of an individual fan failure, an SNMP trap and event log entry are generated. Figure 6. Fan tray for switch 5406zl (J8697-60005) zl modules Management module All configurations of the HP ProCurve Switch 5400zl series include a single management module that oversees the operation of the line interface modules and switch fabric. The management module incorporates an RS-232 serial port for local management and configuration. To connect to the console, a standard nu
Résumé du contenu de la page N° 16
Each of the copper-based line interface modules provides integrated PoE capability. 20-port 10/100/1000 + 4-port Mini-GBIC 24-port 10/100/1000 24-port Mini-GBIC 4-port 10-GbE CX4 4-port 10-GbE X2 Wireless Edge Services Module HP ProCurve ONE Services zl Module Figure 8. HP ProCurve Switch 5400zl series line interface modules Power supply configurations The Switch 5406zl provides slots for two internal supplies and requires at least one internal pow
Résumé du contenu de la page N° 17
Internal + Switch model Minimum internal Maximum internal external 5406zl 1 2 4 5412zl 2 4 6 Table 1. Minimum and maximum power supply support When deciding on which and how many power supplies to configure for a 5400zl series switch, the following criteria can be used to guide the decision: • How much power will be required for each PoE port, full (15.4 watts) or phone (8 watts) power? • How many network devices will require power (how many PoE ports are needed)? • Is redund
Résumé du contenu de la page N° 18
Note that two 875W internal power supplies cannot supply sufficient PoE power to a 5406zl switch fully populated with 24-port line interface modules (144 ports). Two 1500W power supplies can be used to supply full PoE power (15.4 watts) to 116 ports. Number of PoE ports Number of PoE ports Total at 15.4W at 8W Power supply PoE configuration power No With 1+1 No With 1+1 (watts) redundancy redundancy redundancy redundancy 2—875W 546 35 17 68 34 (J8712A) 4—875W 1092 70 35 136
Résumé du contenu de la page N° 19
Figure 9. HP ProCurve Switch 5406zl management module block diagram Processor The CPU processor is a Freescale PowerPC 8540 operating at 667 MHz. Memory SDRAM Synchronous Dynamic RAM is used for the storage of uncompressed executable code and data structures. The SDRAM consists of a 256 MB DDR-1 DIMM in the base module, expandable up to 1 GB. The DDR-1 interface is 64 bits running at 166 MHz bus speed (333 MHz data rate). Flash The flash consists of a 128 MB Compact Flash
Résumé du contenu de la page N° 20
HP ProCurve Switch 5400zl 24p 10/100/1000 PoE Module (J8702A) Description This line interface module has 24 10/100/1000Base-T ports that provide Gigabit-over-copper connectivity for wiring closets, enabling high-density Gigabit connectivity to the desktop over Category 5 copper cabling. Each port is capable of providing IEEE 802.3af compliant Power over Ethernet (PoE) to power IP phones, wireless access points, and other devices. Pre-standard powered devices can also be support
