Résumé du contenu de la page N° 1
USER’S MANUAL
®
TRIMLINE
Telephone 205
For customer service or product
Information, visit our website at
www.telephones.att.com
or call 1(800) 222-3111
© 2006 Advanced American Telephones. All rights reserved.
AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones.
Résumé du contenu de la page N° 2
1
Résumé du contenu de la page N° 3
TABLE OF CONTENTS IMPORTANT PRODUCT INFORMATION········································· 1 Safety Information··············································································· 1 SAVE THESE INSTRUCTIONS························································· 2 FCC and ACTA Information ·································································· 2 Interference Information: Part 15 of FCC Rules············································ 3 Limited Warranty ···············
Résumé du contenu de la page N° 4
IMPORTANT PRODUCT INFORMATION Safety Information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. 1. Read and understand all instructions in the user’s manual. Observe all markings on the product. 2. Avoid using the telephone during a thunderstorm. There may be a slight chance of electric shock fr
Résumé du contenu de la page N° 5
SAVE THESE INSTRUCTIONS FCC and ACTA Information If this equipment was approved for connection to the telephone network prior to July 23, 2001, it complies with Part 68 of the Federal Communications Commission (FCC) rules. If the equipment was approved after that date, it complies with the Part 68 rules and with Technical Requirements for Connection of Equipment to the Telephone Network adopted by the Administrative Council for Terminal Attachments (ACTA). We are required to provide y
Résumé du contenu de la page N° 6
4. Rights of the telephone company If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telep
Résumé du contenu de la page N° 7
use, you might correct the interference with any one or all of these measures: — Where it can be done safely, re-orient the receiving radio, VCR or television antenna. — To the extent possible, relocate the radio, VCR, television or other receiver with respect to the telephone equipment. — If this telephone product runs on AC power, plug your product into an AC outlet that’s not on the same circuit as one used by your radio, VCR or television. Modifications to this product, not
Résumé du contenu de la page N° 8
either (a) ninety (90) days from the date the repaired or replacement PRODUCT is shipped to YOU or (b) the time remaining on the original one-year limited warranty, whichever is longer. 4. WHAT IS NOT COVERED BY THIS LIMITED WARRANTY? This limited warranty does not cover: a PRODUCT that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water, or other liquid intrusion; or b P
Résumé du contenu de la page N° 9
difficulty; b include “valid proof of purchase” (sales receipt) identifying the PRODUCT purchased (PRODUCT model) and the date of purchase or receipt (keep a copy for your records); and c provide your name, complete and correct mailing address, and telephone number. 7. OTHER LIMITATIONS This warranty is the complete and exclusive agreement between YOU and AAT. It supersedes all other written or oral communications related to this PRODUCT. AAT provides no other warranties for this
Résumé du contenu de la page N° 10
CARE AND MAINTENANCE Your AT&T telephone contains sophisticated electronic parts, so it must be treated with care. To keep your telephone working properly and looking good, follow these guidelines: Location Avoid putting the telephone near appliances and devices which generate electrical noise (e.g. motors or fluorescent lamps). Do not expose to direct sunlight or moisture. Avoid rough treatment Place the handset down gently. Avoid dropping the handset and the telephone base.
Résumé du contenu de la page N° 11
PARTS CHECKLIST Remember to save your sales receipt and original packaging in case it is necessary to ship the telephone for warranty service. Check to ensure the telephone package includes the following: 1. Handset 2. Telephone base 3. Handset cord 4. Telephone 5. User’s manual line cord 8
Résumé du contenu de la page N° 12
TABLE/DESK INSTALLATION 1. Write your phone number on the "THIS NUMBER" label on the telephone base. 2. Plug one end of the telephone line cord into Telephone line cord the telephone line jack at the bottom of the telephone base. 3. Thread the cord through the channel and out of the telephone as shown. 4. Connect the other end to Modular a modular telephone wall jack. telephone wall jack NOTE: For HANDSET INSTALLATION, please see page 11. Channel 9
Résumé du contenu de la page N° 13
WALL MOUNT 1. Write your phone number on the "THIS NUMBER" label on the telephone base. 2. Reverse the handset tab as shown. 3. Connect the telephone line cord to the telephone. 4. Press the telephone line cord into the channel and thread excess cord on the telephone base. Connect the free end of the telephone line cord to the modular wall jack. 5. Hold the telephone against the mounting studs as shown, and pull the telephone down. Modular telephone wall jack Line cord Telephone
Résumé du contenu de la page N° 14
HANDSET INSTALLATION 1. Plug the handset cord into the jack on the lower side of the telephone base. 2. Plug the other end of the cord into the handset and put the handset on the telephone base. 3. Lift the handset and listen for a dial tone. If there is no dial tone, see IN CASE OF DIFFICULTY. NOTES: • You can make and answer calls as soon as the Handset tab telephone is connected to a telephone jack. • If the handset tab on the telephone base is not reversed, the handset wi
Résumé du contenu de la page N° 15
OPERATION Handset Operation Flash Access special telephone company subscriber services such as call waiting or 3-way conferencing. It may also be necessary to press other buttons before or after pressing FLASH, as explained in the custom calling instructions provided by your local telephone company. When there is a call waiting signal, press FLASH to put the current call on hold and connect to the new call. Press FLASH again to return to the original call. Also, press FLASH to ac
Résumé du contenu de la page N° 16
OPERATION Handset Operation Handset Volume Adjust listening volume on the handset (LO, MED or HI) Dial Mode Select Touch Tone (tone dialing) or Dial Pulse (rotary dialing). Telephone Base Operation Ringer Volume Adjust the volume of the telephone ringer. If it is set to OFF, this telephone will not ring when there is an incoming call. 13 13
Résumé du contenu de la page N° 17
IN CASE OF DIFFICULTY If there are problems operating this telephone, try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 (800) 222-3111. Please retain your receipt as your proof of purchase. No Dial Tone • Ensure all plugs are connected properly and securely. • Inspect the line cord connections at the modular jack and on the telephone. • Inspect the handset cord connections at both ends. • Unplug the telephone and connect it to an
Résumé du contenu de la page N° 18
15
Résumé du contenu de la page N° 19
16
Résumé du contenu de la page N° 20
Visit us at www.telephones.att.com or call 1 (800) 222-3111 © 2006 Advanced American Telephones. All rights reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 07/06 17
