Résumé du contenu de la page N° 1
iPronto.qxd 01-08-2002 08:44 Pagina 1
Table of Contents
FCC Compliancy 2
What Does the iPronto Box Contain? 3
About the iPronto Documentation 4
About the iPronto 5
Installing the Wireless LAN Adapter 8
Installing and Recharging the Battery 10
Installing 10
Recharging 13
Getting the iPronto Up and Running 14
Setting up Your iPronto 15
Setting up Your Network 20
Using the iPronto 27
The Touch Screen 27
The Status Display 27
The iPronto’s External Controls 28
The Ports 29
Navigating the iPronto
Résumé du contenu de la page N° 2
iPronto.qxd 01-08-2002 08:44 Pagina 2 FCC Compliancy This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rule. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication
Résumé du contenu de la page N° 3
iPronto.qxd 01-08-2002 08:44 Pagina 3 What Does the iPronto Box Contain? The iPronto box contains the following items: iPronto iPronto User Guide Wireless LAN Adapter Warranty AC power adapter with cable Battery 3
Résumé du contenu de la page N° 4
iPronto.qxd 01-08-2002 08:44 Pagina 4 About the iPronto Documentation The iPronto documentation consists of two parts: This iPronto User Guide. This guide is meant to help you set up and start using the iPronto. The iPronto Online Help. The iPronto Online Help contains complete information on how to use the iPronto remote control and its extra features. You can find the iPronto Online Help on http://www.pronto.philips.com/products/ipronto/help/ iPronto User Guide 4
Résumé du contenu de la page N° 5
iPronto.qxd 01-08-2002 08:44 Pagina 5 About the iPronto Wirelessly connected to the Internet, the iPronto is a must-have for your home entertainment experience. With its dashboard you can easily access all iPronto’s applications. The dashboard offers access to three basic applications: the remote control, the Electronic Program Guide and the Browser, however, you can add new applications to the dashboard. With iPronto’s universal remote control you can operate almost all your devices, as long
Résumé du contenu de la page N° 6
iPronto.qxd 01-08-2002 08:44 Pagina 6 About the iPronto The iPronto consists of several parts: stylus microphone speaker power button scroll wheel speaker status display RC buttons iPronto User Guide 6
Résumé du contenu de la page N° 7
iPronto.qxd 01-08-2002 08:44 Pagina 7 About the iPronto IR learning eye and sending eye stand cover of the wireless LAN adapter reset button cover of the battery pack This User Guide is meant to help you set up and start using your iPronto. For detailed information on using the various iPronto applications please refer to the iPronto Online Help. If you follow the flow of the chapters in this guide, you will have your iPronto up and running in no time. You find information about: Installing t
Résumé du contenu de la page N° 8
iPronto.qxd 01-08-2002 08:44 Pagina 8 Installing the Wireless LAN Adapter In a wireless network, the Wireless Access Point (WAP) is the last point that is connected to your network with wires. To communicate with your iPronto, the WAP sends out RF (radio frequency) signals, which spread in all directions. The iPronto’s Wireless LAN Adapter (also called PCMCIA card) receives these RF signals and sends RF signals back to the WAP. The first thing you do when you take your iPronto out of the box,
Résumé du contenu de la page N° 9
iPronto.qxd 01-08-2002 08:44 Pagina 9 Installing the Wireless LAN Adapter 3 Put the Wireless LAN Adapter in the correct position and close the cover. Note Do not install any other adapter. Do not remove the Wireless LAN Adapter when the iPronto is activated. After the Wireless LAN Adapter is installed, there is no need to remove it. It can permanently be left inside the iPronto. 9
Résumé du contenu de la page N° 10
iPronto.qxd 01-08-2002 08:44 Pagina 10 Installing and Recharging the Battery Installing After installing the Wireless LAN Adapter, you install the battery. The battery is precharged, but it is advisable to charge the battery for three hours when you start using the iPronto. See Recharging on page 13. Insert the battery as follows: 1 Lift the stand (figure 1). 2 Open the battery cover by pushing the grips and sliding off the cover in the direction indicated below (figure 2). iPronto User Guide
Résumé du contenu de la page N° 11
iPronto.qxd 01-08-2002 08:44 Pagina 11 Installing and Recharging the Battery 3 Attach the battery connector to the provided socket (figure 3). 4 Put the right-hand side of the battery under the provided hook (figure 4). Figure 3 Figure 4 11
Résumé du contenu de la page N° 12
iPronto.qxd 01-08-2002 08:44 Pagina 12 Installing and Recharging the Battery 5 Push the left side of the battery down into its place. 6 Close the battery cover. iPronto User Guide 12
Résumé du contenu de la page N° 13
iPronto.qxd 01-08-2002 08:44 Pagina 13 Installing and Recharging the Battery Recharging The iPronto is provided with a power adapter to recharge the battery. When the battery is low, it takes about two hours to recharge. After three hours, recharging is automatically stopped. On first usage, it is advisable to recharge the battery for the full three hours. The iPronto can be used when it is recharging. In order to keep the battery in the best condition, it is best to recharge it frequently. I
Résumé du contenu de la page N° 14
iPronto.qxd 01-08-2002 08:44 Pagina 14 Getting the iPronto Up and Running This chapter is divided in two parts. In the first part, Setting up your iPronto, you read how to define the general settings. In the second part, Setting up your Network, you read how to set up your wireless network and internet connection. The first time you activate your iPronto, it will lead you through some initial screens and messages. After these messages the System Settings will automatically appear on the scree
Résumé du contenu de la page N° 15
iPronto.qxd 01-08-2002 08:44 Pagina 15 Getting the iPronto Up and Running General: On this tab you adjust general settings and you can check your battery status and network signal strength. See Setting up Your iPronto on page 15. Wireless: On this tab you set the wireless network settings. You need to set these settings so the iPronto can be connected to your network and to the Internet. See Wireless Network Settings on page 21. Network: On this tab you set your Internet connection settings.
Résumé du contenu de la page N° 16
iPronto.qxd 01-08-2002 08:44 Pagina 16 Getting the iPronto Up and Running Calibrating the Touch Screen On first use, you need to calibrate the touch screen of your iPronto. By calibrating, you improve the accuracy of the touch screen. 1 Select the General tab in the System Settings. 2 Tap the Calibrate touchscreen button. The Calibration screen appears. 3 Follow the instructions that the iPronto provides. When calibration has succeeded, you hear a success beep. Adjusting the Time 1 Select the
Résumé du contenu de la page N° 17
iPronto.qxd 01-08-2002 08:44 Pagina 17 Getting the iPronto Up and Running Adjusting the Date 1 Select the General tab in the System Settings. 2 In the Date section, select the Days box. The selection appears with a highlighted border. 3 Use the + and – buttons to change the day. 4 In the Date section, select the Months box. The selection appears with a highlighted border. 5 Use the + and – buttons to change the month. 6 In the Date section, select the Years box. The selection appears with a h
Résumé du contenu de la page N° 18
iPronto.qxd 01-08-2002 08:44 Pagina 18 Getting the iPronto Up and Running Adjusting the Brightness You can set the brightness of the touch screen in 16 intervals. 1 Select the General tab in the System Settings. 2 In the LCD Brightness section, use the + and – buttons to set the brightness. Adjusting the Power off Time Out Time Out when iPronto is running on the battery 1 Select the General tab in the System Settings. 2 In the LCD power off when running on batteries section, use the + and – b
Résumé du contenu de la page N° 19
iPronto.qxd 01-08-2002 08:44 Pagina 19 Getting the iPronto Up and Running Adjusting the Wake up Conditions You can wake up a sleeping iPronto in several ways. 1 Select the General tab in the System Settings. 2 In the Wake up on section, select: Power Button & Touch & Tilt to wake up the iPronto when the Power Button is pressed, when the screen is tapped or when the iPronto is tilted. Power Button & Touch to wake up the iPronto when the Power Button is pressed or when the screen is tapped. Pow
Résumé du contenu de la page N° 20
iPronto.qxd 01-08-2002 08:44 Pagina 20 Getting the iPronto Up and Running Setting up Your Network After adjusting the settings in the General tab, you have to set your wireless network settings and Internet settings in the Wireless and Network tabs. These settings depend on the kind of configuration you have in your home. You can find an overview of different kinds of configurations in the iPronto Online Help at http://www.pronto.philips.com/products/ipronto/help/. In the illustration below y
