Instruction d'utilisation Dynex DX-TVM112

Résumé du contenu de la page N° 1

1 Attach the TV brackets 2 Install the wall plate
Option 1: Attaching to a TV with a flat back surface Option 1: Installing to a wood stud wall
Attach the left and right TV brackets (B and C) to the back of the TV using: 1 Locate the stud. Verify the center of the stud with an awl or thin nail or
The M4 washers (G) and the M4 screws (D). use an edge to edge stud finder.
Or 2 Level the wall plate (A) and mark the hole locations.
Low-Profile TV Mount
The M6 washers (L) and the M6 screws (H

Résumé du contenu de la page N° 2

Option 2: Installing to a solid concrete or concrete block wall 3 Mount the TV to the wall 1 Level the wall plate (A) and mark the hole locations. Slide the upper notches on the TV bracket over 2 Drill the pilot holes as illustrated. the upper flanges on the wall bracket. 3 Insert the concrete wall anchors (M) into the pilot holes and make sure that the anchors are seated flush with the surface. HEAVY! You will need 4 Align the wall plate (A) with the wall anchors, then place the washers (