Résumé du contenu de la page N° 1
TV/VCR/DVD
User's Guide
Changing Entertainment. Again.
Résumé du contenu de la page N° 2
WARNING CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC RISK OF ELECTRIC SHOCK SHOCK, DO NOT EXPOSE THIS PRODUCT DO NOT OPEN TO RAIN OR MOISTURE. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THIS PRODUCT UTILIZES A LASER. USE OF NO USER SERVICEABLE PARTS INSIDE. CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION This symbol indicates This s
Résumé du contenu de la page N° 3
IMPORTANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your product, safety is a major factor in the design of every product. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the product and accessory equipment. Please read them carefully before operating and using your product. Installation 1 Read and Follow Instructions—All the safety and operating i
Résumé du contenu de la page N° 4
IMPORTANT SAFEGUARDS 11AA product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 12 Outdoor Antenna Grounding—If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of C
Résumé du contenu de la page N° 5
IMPORTANT SAFEGUARDS D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require exten-sive work by a qualified technician to restore the product to its normal operation. E. If the product has been dropped or the cabinet has been damaged. F. When the product exhibits a distinct change in performance, such as the inab
Résumé du contenu de la page N° 6
Features Color TV with DVD/CD Player/Video Cassette Recorder • Color TV with DVD/CD player with Video Cassette Recorder - Unique space saving design combines a color TV, a DVD/CD player and a Hi-Fi Video cassette recorder. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back audio CDs. • High Quality Picture - More than 400 lines (VCR mode: 220 lines) of Horizo
Résumé du contenu de la page N° 7
Contents Before using your unit Disc playback operation IMPORTANT SAFEGUARDS .......................... 3 Disc ................................................................ 43 Power Source................................................... 5 Preparation..................................................... 44 Features ........................................................... 6 Status display of disc ..................................... 44 Contents ...........................................
Résumé du contenu de la page N° 8
Parts and functions Front POWER button Disc tray SKIP buttons Cassette Loading Slot Headphones PLAY button (DVD) jack STOP button (DVD) VIDEO IN jack AUDIO IN (L/R) jacks VOL ▲ /▼ buttons (TV) REW (Rewind) button (VCR) OPEN/CLOSE button (DVD) STOP/EJECT button (VCR) T.REC (Timer Recording) indicator (VCR) PLAY button (VCR) REC/OTR indicator (VCR) F.FWD button (VCR) Power indicator REC/OTR button (VCR) Remote sensor CH ▲ /▼ buttons (TV) AC power cord VIDEO OUT jack Rear VIDEO IN jack OUT PUT LINE
Résumé du contenu de la page N° 9
Remote control Page POWER Power on/off 15 Button descriptions (top left to TV/VCR Press to operate TV/VCR 15 right) DVD Press to operate DVD 44 CH +/– Select channel 20,35,37 0-9 Number buttons 19,23,35 Input setting 48,49 Enter a password 24,26,55~57 VOL +/– Adjust volume of TV 19 MUTE Switch off the sound 20 DISPLAY/CALL Display TV/VCR or DVD operation status 16,20,34,36,44 JUMP Locate the desired scene 48 QUICK VIEW Switch between present/last channel 20 / / / Arrow buttons for navigation
Résumé du contenu de la page N° 10
Remote control (continued) Inserting Batteries Open the battery compartment Install two "AAA" batteries paying Replace the compartment 1 23 cover in the direction of the attention to the polarity diagram in cover. arrow. the battery compartment. Battery precautions The precautions below should be followed when using batteries in this device: 1.Use only the size and type of batteries specified. 2.Be sure to follow the correct polarity when installing
Résumé du contenu de la page N° 11
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using cable TV service (CATV), see page 12 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire) Connect the 75 ohm Cable from the Combination VHF/UHF Antenna to the RF IN Jack. RF IN RF IN If your Combination VHF/UHF Antenna has a 300 jack jack ohm Twin-lead Wire, the use of the 300-75 ohm Matching Tra
Résumé du contenu de la page N° 12
Cable TV connections This unit has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE For basic cable service not requiring a Converter/Descrambler RF IN box, connect the CATV 75 ohm Coaxial
Résumé du contenu de la page N° 13
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the unit is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Using an Audio Amplifier Rear of unit Amplifier OUT PUT LINE 1 IN VHF/UHF VIDEO VIDEO DIGITAL AUDIO L L(MONO) COAXIAL AUDIO AUDIO R R To Audio (L) Input Audio (L) Output To Audio (R) Input Audio (R) Output AU
Résumé du contenu de la page N° 14
Connections to other equipment (continued) Using the audio/video inputs If you connect the unit to camcorder or a TV game, you can select by pressing INPUT SELECT. NOTE: Press INPUT SELECT repeatedly to select the desired mode. “LINE1”, “LINE2” or TV channel will display on the screen for 4 seconds. In the DVD mode this key will not operate. LINE 1 TV Channel LINE 1 LINE 2 (Back) (Front) To connect the unit to a camcorder To playback from the camcorder, connect the camcorder to the unit as shown
Résumé du contenu de la page N° 15
Setting the language You can choose from three different Press POWER to turn on the unit. languages (English, French and 1 Spanish) for the on-screen displays. Press TV/VCR to select the TV/VCR mode. 2 Press TV MENU. Press or to 3 M E N U select “SYSTEM SETUP”, then TIMER REC SET TV SETUP press ENTER. CH SETUP If you use the unit for the first time AUTO REPEAT ON OFF SYSTEM SETUP and press TV MENU, instead of the main menu screen on the right 〈 〉 ▲/▼/ENTER/MENU the “LANGUAGE” screen in s
Résumé du contenu de la page N° 16
Auto clock setting The Auto Clock function will AUTO CLOCK SETTING automatically set the built-in clock (Month, Day, Year and Time) when the 1 Connect the Antenna or Cable system. unit is connected to an Antenna or • If you use a cable box, turn it on. Cable system and it is turned off. As the unit searches for a receivable sta- 2 Plug the AC Power cord to the AC outlet. tion in your area and it receives a broadcast signal for Auto Clock, the 3 Make sure the TV/VCR/DVD is turned off. Auto Clock
Résumé du contenu de la page N° 17
Auto clock setting TO SET STANDARD TIME In the rare event that you live within broadcast range of two stations in two different time zones, the unit may recognize the wrong station for the Auto Clock set. To correct the situation: 1 Press TV MENU. 2 Press or to select “SYSTEM SETUP”, then press ENTER. 3 Press or to select “STANDARD TIME”, then press ENTER. 4 Press or to select your time zone, then press ENTER. ATLANTIC : GMT – 4 hours (GMT: Greenwich Mean Time) EASTERN : GMT – 5 hours C
Résumé du contenu de la page N° 18
Manual clock setting You must set the date and time EXAMPLE: Setting the clock to "8:30 AM" October, 29 (WED), 2003. manually for Timer Recordings, ON/ OFF Timer and Daylight Saving Time if the Auto Clock process did not set Press TV MENU. The TV/VCR menu screen will appear. 1 them correctly. Press or to select the 2 M E N U TIMER REC SET “SYSTEM SETUP” menu, then TV SETUP press ENTER. CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP 〈▲/▼/ENTER/MENU〉 Press or to select the 3
Résumé du contenu de la page N° 19
TV operation To turn on the unit, press POWER. 1 Adjust the volume level by 2 pressing VOL + or – . The volume level appears. Set the TV/CATV menu 3 TV - Antenna Connection option to the appropriate CATV - CABLE Connection position. (See page 22.) Press the number buttons to select 4 the channel. Channels can be instantly selected by using two buttons. (for example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for a few
Résumé du contenu de la page N° 20
TV operation (continued) CALL TV/VCR Press DISPLAY/CALL to display the 8 : 47AM MON CH 125 STEREO SAP current information on the screen. Press DISPLAY/CALL again to clear the call display. 00 : 00 : 00 SP QUICK VIEW Press QUICK VIEW to return to the last channel you were watching. MUTE Press MUTE to switch off the sound. MUTE The unit’s sound will be silenced and “MUTE” will briefly appear on the screen. The sound can be switched back on by pressing this button again or VOL + or –. SLEEP SL
