Instruction d'utilisation JL Audio STEALTHBOX SB-VW-NB/10W3v3

Résumé du contenu de la page N° 1

STEALTHBOX
SB-VW-NB/10W3
Fits 1998-00 Volkswagen Beetle
Installation of this Stealthbox requires professional installation skills and tools. Please read this installation guide
thoroughly before beginning the project. It will guide you step by step through the installation. It is absolutely
vital that the enclosure be properly mounted to the vehicle according to these instructions. Failure to mount
the enclosure properly presents two problems: 1) The sub-bass performance will suffer due

Résumé du contenu de la page N° 2

STEP 8: Place the spare tire on the Stealthbox so that the threaded stud goes through one of the lug bolt holes in the wheel and secure it with the provided 1/2” wing nut and 1/2” fender washer. Picture #4 STEP 9: Place the Stealthbox into the spare tire well and bolt it into place, through the hole drilled in Step #7, as shown in Diagram #1. THREADED INSERT ENCLOSURE WALL VEHICLE SHEET METAL SILICONE SEALANT Picture #5 FENDER WASHER LOCK WASHER BOLT Diagram #1 STEP 10: Place supplied fl

Résumé du contenu de la page N° 3

STEP 11: Install the supplied rear trim panel with the factory connectors that were used to secure the rear fl ap of the factory fl oor/carpet that was removed in Step #1. All pieces are shown in Picture #7. Picture #7 Picture #8 Picture #9 shows the completed installation. Picture #9 Specifi cations: Supplied Materials: 1 - 3/8” x 1 1/2” Bolt Enclosure Type: Acoustic Suspension (Sealed) Driver Type: 10W3-D2 1 - 3/8” Fender Washer Cont. Power Handling: 250 Watts 1 - 3/8” Lock Washer Nominal Im