Résumé du contenu de la page N° 1
®
DigiPro
USER’S GUIDE
MODEL 6900 SERIES
3
Safety Instructions
4 Product View
5
Assembly
6
Special Tools
Operation / Maintenance
6-9
Troubleshooting
10
10
Consumer Services
11
Replacement Parts
12
Warranty
u ug603-4424_6900_705 1 g603-4424_6900_705 1 7 7/27/05 11:55:56 AM /27/05 11:55:56 AM
Résumé du contenu de la page N° 2
® Thanks for buying a BISSELL DigiPro ® We’re glad you purchased a BISSELL DigiPro Vacuum. Everything we know about floor care went into the design and construction of this lightweight and versatile vacuum. ® Your BISSELL DigiPro is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great-grandfather invented the f
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic ■ Do not pick up toxic material (chlorine bleach, precautions should be observed, including ammonia, drain cleaner, etc.). the following: ■ Do not use in an enclosed space filled with vapors Read all instructions before using your canister given off by oil base paint, paint thinner, some moth vacuum cleaner. proofing substances, flammable dust, or other explosive or toxic vapors. WARNING: To reduce t
Résumé du contenu de la page N° 4
Product View Handle ® DirtLifter PowerBrush Suction Control Switch Handle Release Button Vacuum Bag Compartment Release Extension Wand Release Hose Connector Telescoping Extension Wand Bag Change Indicator Storage Tool Storage Hook Cover Release Support Power Control Switches Powerfoot Release Power Switch Height Washable HEPA Filter Adjustment Knob ® DirtLifter PowerBrush Crevice Tool Headlight Cord Rewind Dusting Brush Button Power Flex Hose Cord Upholstery Tool 4 u ug603-4424_6900_705
Résumé du contenu de la page N° 5
How To Use This Guide W ARNING: This User's Guide is designed to help you gain the best ® ® ® Do not plug in your DigiPro performance from your BISSELL DigiPro Vacuum Cleaner. until you have completely Inside you will find assembly and operating instructions, safety assembled it according to the precautions, maintenance and troubleshooting instructions. following instructions and Please read through this Guide thoroughly before assembling have become familiar with all and using your
Résumé du contenu de la page N° 6
Special Tools The DigiPro comes with a Crevice Tool, Dusting Brush, and Upholstery Tool. Tools are stored inside the canister unit. To reach them, simply lift up the Tool Storage Cover Release. Tools may be attached on the Handle or, where longer reach is needed, to the Extension Wand. To attach a Tool to the Handle, press the Handle Release button and pull up until the Handle disconnects from the 1. Extension Wand. Slide the Handle over the Tool. Make sure it is secure before using. To a
Résumé du contenu de la page N° 7
Suction Control Switch Located on the Handle, the Suction Control Switch slides to vary suction for multiple cleaning tasks like draperies or other delicate surfaces. Power Control Switches The power can be adjusted to suit many cleaning situations. Variable Power Controls Allows for optimum manual setting for each cleaning 1. task. Press appropriate button for task: = For delicate fabrics or low suction = Economy setting for normally soiled surfaces or normal suction = For hard floors/h
Résumé du contenu de la page N° 8
Washable Pre-Motor Filter Pre-Motor Filter The Pre-Motor Filter prevents dust and debris from interfering with the operation of your vacuum. It should be regularly checked for wear or damage and replaced when torn. Pull up on the Vacuum Bag Compartment Release lever to open the canister. The Pre-Motor Filter is attached 1. inside the unit, behind the Vacuum Bag. Slide the filter out of the attachment channel. The filter may be gently cleaned by washing in warm water with a 2. mild detergen
Résumé du contenu de la page N° 9
® Cleaning the DirtLifter PowerBrush The Brush can usually be cleaned without removal from the vacuum. If there is an excessive amount of hair and debris, W ARNING: however, it is best to remove the Brush. Unplug from outlet when not in use and before servicing. Pressing down on the Powerfoot Release button, detach the Powerfoot from the Extension Wand. 1. Lay the Powerfoot face forward on the floor. 2. Locate the locking screws (6) on the bottom of the Powerfoot. Using a Phillips head
Résumé du contenu de la page N° 10
Troubleshooting Vacuum Cleaner Won’t Run. Possible Causes Remedies 1 1 Vacuum cleaner is not plugged in Check electrical plug Check electrical connection 2 Household fuse/circuit breaker 2 Check/replace fuse Reset breaker Vacuum Cleaner Won’t Pick Up Dirt. Possible Causes Remedies 1 1 Powerfoot, Extension Wand or Check each for blockage Filters are blocked or clogged 2 Vacuum Bag is full. 2 Replace Vacuum Bag 3 3 Brush is jammed Remove Brush and clean debris from end of B
Résumé du contenu de la page N° 11
Replacement Parts You may purchase replacement parts from your retailer, by calling BISSELL Consumer Services or by visiting our website. To locate a retailer near you, or to place an order using Visa, Mastercard, Discover or American Express, call: BISSELL Consumer Services 1-800-237-7691 Monday - Friday 8 a.m. — 10 p.m. ET Saturday 9 a.m. — 8 p.m. ET Or visit our website - www.bissell.com Item Part No. Part Name 1 32033 Belt-Power Foot (2-pack) 2 203-4402 Brush-Power Foot 3 203-10
Résumé du contenu de la page N° 12
Warranty This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact BISSELL Consumer Services by e-mail, telephone, or regular mail as described below. Limited One Year Warranty Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product, BISSELL Homecare, Inc. will repair or replace (w
