Résumé du contenu de la page N° 1
CD-RECEIVER
KDC-X7533U
KDC-MP5033U
INSTRUCTION MANUAL
© B64-3344-00/00 (MW)
Résumé du contenu de la page N° 2
Contents All Random Play Safety precautions 3 Select mode File Select mode Notes 4 Folder Select 1 mode Folder Select 2 mode About CDs 6 Switching the Play mode About USB device 7 Letter Seek Text/Title Scroll About AAC, MP3 and WMA 8 Menu system 26 General features 10 Menu System Security Code Power Touch Sensor Tone Selecting the Source Manual Clock Adjustment Volume DSI (Disabled System Indicator) Attenuator Selectable Illumination System Q Display Illumination Control Audio Control Dimmer Ad
Résumé du contenu de la page N° 3
Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the Kenwood disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Mounting and wiring this product req
Résumé du contenu de la page N° 4
Notes • No USB device comes with this unit. You need to Cleaning the Unit purchase a commercially available USB device. For If the faceplate of this unit is stained, wipe it with a the types of available USB devices, refer to (page 7). If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then • If you experience problems during installation, wipe it again with a clean soft dry cloth. c
Résumé du contenu de la page N° 5
About DAB Tuner control Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function. However, the following control methods of the function for this unit may be differed from the Instruction manual; therefore, refer to the following supplemental instruction. 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memor
Résumé du contenu de la page N° 6
About CDs Handling CDs Removing CDs • Do not touch the recording surface of the CD. When removing CDs from this unit, pull them out horizontally. CDs that cannot be used • CDs that are not round cannot be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Do not stick tape etc. on the CD, or use a CD with • CDs with coloring on the recording surface or CDs tape stuck on it. that are dirty cannot be
Résumé du contenu de la page N° 7
About USB device Notes on Use of the USB device This unit can play audio files stored in the flash • Install the USB device in the place where it will not memory and digital audio player that have a USB prevent you from driving your vehicle properly. port (these devices are referred to as USB devices in • Do not leave the USB device in the vehicle for a long this document). time. It can deform or damage due to direct sunlight, The following restrictions are placed on the types high tempe
Résumé du contenu de la page N° 8
About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Playable CD-R/RW format Audio file) and the media format has the following • ISO 9660 Level 1/2 limitation. The Audio file, which is not conforming • Joliet to the specification, may not play normally, or the • Romeo file and folder names may not display correctly. • Long file name. Playable Audio file Playable file format of USB device • AAC, MP3, WMA • For the formats supported by USB devices, refer to http://www.kenw
Résumé du contenu de la page N° 9
Playing order of the Audio file • The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name. • Audio files are played in the order the files are written. You can specify the order of playback by numbering files in a folder and writing them by folder. (USB device) Example ^: F Folder older CD (1) ¡: Audio file Audio file ¡! 2 3 ¡" ¡# 4 ¡$ 5 ¡%
Résumé du contenu de la page N° 10
General features ATT VOL Control knob Q SRC Release button Clock display LOUD indicator ATT indicator Power • * Function of the KDC-X7533U. Turning ON the Power Press the [SRC] button. • When the power is ON, the (page Volume 27) is displayed as "CODE ON" or "CODE OFF". Turning OFF the Power Increasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob clockwise. Decreasing Volume Turn the [VOL] knob counterclockwise. Selecting the Source Press the [SRC] bu
Résumé du contenu de la page N° 11
System Q Audio Control Selecting the best sound setting preset for 1 Select the source to adjust different types of music. Press the [SRC] button. 1 Select the source to set 2 Enter Audio Control mode Press the [SRC] button. Press the [VOL] knob. 2 Select the Sound type 3 Select the Basic Audio item to adjust Press the [Q] button. Press the [VOL] knob. When you press the button once, the current Each time you press the knob, the item to be sound setting is displayed. adjusted alternates betwe
Résumé du contenu de la page N° 12
General features Function of the KDC-X7533U Audio Setup Adjusting the detail of Audio Setting the Sound system, such as Cross over Control Network. Among the Basic Audio items, you can adjust the 1 Select the source to adjust Bass level, Middle level, and Treble level in detail. Press the [SRC] button. 1 Select the Basic Audio item 2 Enter Audio Setup mode Select the desired item to be set in detail from Press the [VOL] knob for at least 1 second. followings; 3 Select the Audio Setup item t
Résumé du contenu de la page N° 13
• You can use the Dual Zone System with the Auxiliary input sources listed below. - Option CA-C1AX/ CA-C2AX 5 Exit Audio Setup mode Press the [VOL] knob for at least 1 second. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Speaker Setting mode Press the [VOL] knob. 3 Select the Speaker type Turn the [VOL] knob. Each time you turn the knob, the setting alternates betw
Résumé du contenu de la page N° 14
General features Switching Display Theft Deterrent Faceplate Changing the information displayed. The faceplate of the unit can be detached and taken with you, helping to deter theft. 1 Enter Switching Display mode Press the Control knob for at least 1 second. Removing the Faceplate "DISP SEL" is displayed. 1 Press the Release button. Drop open the faceplate. 2 Select the Display item Push the Control knob towards [4] or 2 Drawing the faceplate to left side pull it to [¢]. forward and remove
Résumé du contenu de la page N° 15
TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer
Résumé du contenu de la page N° 16
Tuner/TV control features AUTO/AME Control knob 1-6 SRC Band display Frequency display Preset station number ST indicator Tuning Mode Tuning Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning Press the [SRC] button. mode alternates between the modes shown in Select the "TUNER" display. the table below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto seek "AUTO
Résumé du contenu de la page N° 17
Function of the KDC-X7533U Auto Memory Entry Function of remote control Putting stations with good reception in the Direct Access Tuning memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Open Auto Memory Entry 2 Enter Direct Access Tuning mode Press the [AME] button for at least 2 seconds. Press the [DIRECT] button on the remote "A-MEMORY" is displayed.
Résumé du contenu de la page N° 18
Tuner/TV control features Function of the KDC-X7533U Function of the KDC-X7533U Function of LX BUS Television Function of LX BUS Television TV Tuning Preset TV Tuning Selecting the TV channel of a connected LX BUS Recalling the TV channels in the memory. Television (optional accessory). 1 Select the TV band The action depends on the setting of the Push the Control knob toward [FM]. connected LX BUS Television. Refer to the user instruction of the LX BUS Television for details. 2 Recall the TV
Résumé du contenu de la page N° 19
CD/USB device/Audio file/External disc control features Control knob Release button S.MODE SCAN RDM/3/ REP F.SEL M.RDM SRC A.RDM Track number Play time Play mode Disc number IN indicator When a disc is inserted Playing CD & Audio file Press the [SRC] button. Select the "CD" display. When there is no disc inserted 1 Drop open the faceplate Pause and play Press the Release button. Press the Control knob. Each time you press the knob, the audio pauses 2 Insert a disc. or plays. 3 Push the facepla
Résumé du contenu de la page N° 20
CD/USB device/Audio file/External disc control features Playing USB device Playing External Disc Playing discs set in the optional accessory disc Playing USB device player connected to this unit. 1 Select a source other than the USB device Press the [SRC] button. Press the [SRC] button. Select the display for the disc player you want. 2 Connect the USB device. Display examples: 3 Select USB source Display Disc player Press the [SRC] button. "CD CH" CD changer Select the "USB" display. "MD CH" M
