Résumé du contenu de la page N° 3
Handling Compact Discs 6. REMOTE CONTROL 2. PRECAUTIONS Use only compact discs bearing the mark. Receiver for remote control unit 1. When the inside of the car is very cold and 3. This unit uses a precision mechanism. Even Do not play heart-shaped, octagonal, or other specially shaped compact discs. the player is used soon after switching on in the event that trouble arises, never open the heater moisture may form on the disc or the case, disassemble the unit, or lubricate • To remove a compact
Résumé du contenu de la page N° 4
3. CONTROLS / LES COMMANDES / CONTROLES 4. NOMENCLATURE 5. DCP Note: The control panel can be detached to prevent theft. When detaching the control panel, store it in the • Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. Source unit / Appareil pilote / Unidad fuente We recommend taking the DCP with you when leaving the car. Names of Buttons Removing the DCP Attaching the DCP 1 OPEN
Résumé du contenu de la page N° 5
Functions of Remote Control Unit Buttons CD changer Mode Radio CD TV Button MD changer , FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches among radio, CD, CD changer, MD changer and TV. - BAND Plays the first track. Moves the next disc Switches reception Switches reception DISC UP Top play. in increasing order. band. band. PROG TOP . VOLUME Increases and decreases volume (in all modes). / SEARCH Moves preset Moves tracks up Moves tracks up Moves preset c
Résumé du contenu de la page N° 6
7. OPERATIONS Note: Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “3. CONTROLS” on page 5 (unfold). Radio mode CD mode CD changer mode CAUTION MD changer mode TV mode Radio mode... Be sure to lower the volume before switch- ing off the unit power or the ignition key. The * External equipment not connected with CeNET is not displayed. unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the pow
Résumé du contenu de la page N° 7
Basic Operations * When you have entered a title in a CD, it ap- Adjusting the balance pears in the sub display. If you have not en- 1. Press A-M button $ and select “BAL”. tered a title, “NO-TITLE” appears in the title display instead. For information on how to en- 2. Turning the Rotary knob & clockwise empha- ter a title, refer to the subsection “Entering sizes the sound from the right speaker; turn- titles” in the “Other Handy Functions”. ing it counterclockwise emphasizes the sound from the
Résumé du contenu de la page N° 8
Basic Operations Radio Operations Turning on/off the loudness FM reception ® The loudness effect emphasizes the bass and For enhanced FM performance the treble to create a natural sound tone. When you tuner includes signal actuated stereo control and are listening to music at a low volume, it is rec- Multipath noise reduction circuits. ommended to use the loudness effect. 1. Press and hold LD button $ for 1 second or Changing the reception area longer to turn on the loudness effect. When This
Résumé du contenu de la page N° 9
Radio Operations Manual tuning Auto store There are 2 ways available: Quick tuning and step Auto store is a function for storing up to 6 sta- tuning. tions that are automatically tuned in sequentially. When you are in the step tuning mode, the fre- If 6 stations cannot be received, a previously quency changes one step at a time. In quick tun- stored station remains unoverwritten at the ing mode, you can quickly tune the desired fre- memory position. quency. 1. Press BND button # and select the d
Résumé du contenu de la page N° 10
CD Operations Loading a CD CAUTION 1. Press OPEN button 1 to access the CD in- Be careful not to catch your hand or fingers sertion slot behind the FLIP DOWN PANEL. while closing the FLIP DOWN PANEL. 2. Insert a CD into the center of the insertion Notes: slot with the label side facing up. The CD plays • If the FLIP DOWN PANEL does not open fully, automatically after loading. gently open with your hand. Notes: • After taking out the CD, be sure to close the FLIP • Never insert foreign objects in
Résumé du contenu de la page N° 11
CD Operations Other Handy Functions Scan play Setting the clock The scan play locates and plays the first 10 sec- 1. Press and hold ADJ button 4 for 1 second or onds of each track on a disc automatically. This longer to switch to the adjustment selection function continues on the disc until it is canceled. display. * The scan play is useful when you want to select a 2. Press the right or left side of SEARCH button desired track. % to select “CLOCK”. 1. Press SCN button 5 to start track scanning.
Résumé du contenu de la page N° 12
Other Handy Functions 6. Press DISP button ! to select a character. Message display Each time you press DISP button !, the char- When the unit is powered on or off, a message is acter changes in the following order: displayed. The user can turn this message dis- Capital letters Numbers Capital letters... play on or off. 7. Turn the Rotary knob & to select the desired * The factory default setting is “ON”. character. Turning the Rotary knob & clock- 1. Press and hold ADJ button 4 for 1 second
Résumé du contenu de la page N° 13
8. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions Selecting a CD When an optional CD changer is connected Each of the Direct button 9 corresponds to a through the CeNET cable, this unit controls all disc loaded into the magazine. the CD changer functions. This unit can control l Selecting a disc from 1 to 6 a total of 2 changers (MD and/or CD). Press the corresponding Direct button 9 (1 to Press FNC button 3 and select the CD changer 6) to select the desired disc. mode to s
Résumé du contenu de la page N° 14
CD Changer Operations Top function Disc repeat play The top function plays from the first track (track After all the tracks on the current disc have been No. 1) of the disc. played, the disc repeat play automatically replays the current disc over from the first track. This l When playing a disc 1 to 6 function continues automatically until it is Press the Direct button 9 (1 to 6) with the same canceled. number as the CD playing. 1. Press and hold RPT button 6 for 1 second l When playing a disc 7
Résumé du contenu de la page N° 15
MD Changer Operations MD changer functions 2. Each time you press the right side of SEARCH button %, the track advances ahead to the When an optional MD changer is connected beginning of the next track. through the CeNET cable, this unit controls all l Track-down the MD changer functions. This unit can control a total of 2 changers (MD and/or CD). 1. Press the left side of SEARCH button % to move back to the beginning of the current track. Press FNC button 3 and select the MD changer mode to sta
Résumé du contenu de la page N° 16
MD Changer Operations TV Operations Repeat play TV tuner functions The repeat play continuously plays the current When an optional TV tuner is connected through track. This function continues automatically until the CeNET cable, this unit controls all TV tuner it is canceled. functions. To watch TV requires a TV tuner and monitor. 1. Press RPT button 6. “RPT” lights in the dis- play and the current track is repeated. Watching a TV 2. To cancel the repeat play, press RPT button 6 again. “RPT” goe
Résumé du contenu de la page N° 17
TV Operations Manual tuning Auto store There are 2 ways available: Quick tuning and step Auto store selects 6 TV stations automatically tuning. and stores each one into a preset memory. When you are in the step tuning mode, the If there are not 6 stations with good reception, frequency changes one step at a time. In quick stations previously stored in memory remain and tuning mode, you can quickly tune the desired only the strong stations are stored into memory. frequency. 1. Press BND button #
Résumé du contenu de la page N° 18
9. TROUBLESHOOTING Problem Cause Measure Power does not Fuse is blown. Replace with a fuse of the same amperage. If the turn on. fuse blows again, consult your store of purchase. (No sound is produced.) Incorrect wiring. Consult your store of purchase. No sound output Power antenna lead is 1. Turn the unit off. when operating shorted to ground or 2. Remove all wires attached to the power antenna the unit with excessive current is required lead. Check each wire for a possible short to amplifiers
Résumé du contenu de la page N° 19
10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Cause Error Display Measure ERROR 2 A CD is caught inside the CD deck and is This is a failure of CD deck’s mechanism not ejected. and consult your store of purchase. ERROR 3 A CD cannot be played due to scratches, Replace with a non-scratched, etc. non-warped disc. ERROR 6 A CD is loaded upside-down inside the CD Eject the disc then reload it properly. d
Résumé du contenu de la page N° 20
11. SPECIFICATIONS FM Tuner Audio Frequency Range: Maximum Power Output: 87.9 MHz to 107.9 MHz 160 W (40 W × 4 ch) (EIAJ) Usable Sensitivity: Continuous Average Power Output: 11 dBf 14 W × 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD 50dB Quieting Sensitivity: Bass Control Action (30 Hz): 17 dBf ±15 dB Alternate Channel Selectivity: Treble Control Action (10 kHz): 75 dB ±10 dB Stereo Separation (1 kHz): Line Output Level (CD 1 kHz): 35 dB 4 V Frequency Response (±3 dB): 30 Hz to 15 kHz General Power Su
Résumé du contenu de la page N° 1
Owner’s manual
Mode d’emploi
Manual de instrucciones
RDX655Dz
AM/FM CD PLA YER
WITH CD/MD CHANGER CONTROL
•
LECTEUR CD AM/FM AVEC
COMMANDE DE CHANGEUR CD/MD
•
RADIO DE AM/FM Y REPR ODUCT OR DE DISCOS
COMP A CT OS CON CONTR OL DE CAMBIADOR
DE DISCOS COMP A CT OS/MINIDISCOS
OPEN
T
Clarion Co., Ltd.
PE-2190B
All Rights Reserved. Copyright © 1998: Clarion Co., Ltd.
1998/11 (S·C) 280-7250-00
Printed in China / Imprimé en Chine / Inpreso en China
Résumé du contenu de la page N° 2
Thank you for purchasing the Clarion RDX655Dz. * Please read this owner’s manual in its entirety before operating this equipment. * After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). * Check the contents of the enclosed warranty card and keep it carefully with this manual. * This manual includes the operating procedures of the CD changer, MD changer and TV tuner con- nected via the CeNET cable. The CD changer, MD changer and TV tuner have their own manuals,
