Résumé du contenu de la page N° 1
4-227-583-12(1)
Compact Disc
Player
GB
Operating Instructions
FR
Mode d’emploi
DE
Bedienungsanleitung
ES
Manual de instrucciones
TM
S200
CDP-LSA1
ª 2000 Sony Corporation
Résumé du contenu de la page N° 2
On cleaning WARNING Clean the cabinet, panel and controls Precautions with a soft cloth slightly moistened with To prevent fire or shock a mild detergent solution. Do not use On safety any type of abrasive pad, scouring hazard, do not expose the unit • Caution — The use of optical powder or solvent such as alcohol or to rain or moisture. instruments with this product will benzine. increase eye hazard. To avoid electrical shock, do • Should any solid object or liquid fall Replacing the battery i
Résumé du contenu de la page N° 3
TABLE OF CONTENTS Welcome! Thank you for purchasing the Sony Compact Disc Player. Before operating Getting Started the unit, please read this manual thoroughly and retain it for future Unpacking 4 reference. Hooking Up the System 4 Basic Operations About This Manual Playing a CD 6 The instructions in this manual are for model CDP-LSA1. Playing CDs Conventions Using the Display 8 • Instructions in this manual describe Locating a Specific Track or a Particular Point in a Track 11 the controls on
Résumé du contenu de la page N° 4
Getting Started Getting Started Unpacking Hooking Up the System Check that you have received the following items: Overview • i.LINK connecting cable (1) This section describes how to hook up the CD player to • Remote commander (remote) (1) a receiver or other components such as an MD deck. Be sure to turn off the power to all components before you start connecting them. Before using the supplied remote CDP-LSA1 The supplied remote already contains a battery. Before using the remote, pull out th
Résumé du contenu de la page N° 5
Getting Started Getting Started Hookups Attaching the protective bar Connecting the player to a receiver Connect the receiver to the i.LINK S200 connector with When transporting the player, be sure to attach the the i.LINK connecting cable (supplied). Make sure all protective bar (which you removed at the time you connections are firm. If not, there will be no sound unpacked the player) onto the disc tray, and use from the speakers. adhesive tape to secure the bar. If you fail to CDP-LSA1 Rec
Résumé du contenu de la page N° 6
Basic Operations Basic Operations Playing a CD 3 4 2 ¤
xáP p DISPLAY =+ STANDBY 1/u • See pages 4 - 5 for hookup Turn on the receiver and select the CD player as the audio information. 1 source. Press 1/u to turn on the player. 2 The STANDBY indicator turns off. Note Press ¤ and place a CD on the tray. In step 3, do not place more than 3 one CD on the tray at the same time. If you do so, the discs and/or the player may be damaged. Place the CD with the label side up. When you play a CD single
Résumé du contenu de la page N° 7
Basic Operations Basic Operations Basic Operations To stop playback Press p. áPp ¤
xáP p DISPLAY =+ 1/u ¤
=/+ To Press Pause áP Resume play after pause áP Go to the next track + Go back to the preceding track = Stop play and remove the CD ¤ GB 7
Résumé du contenu de la page N° 8
Playing CDs Playing CDs Information displayed while playing a disc Using the Display The current track number and elapsed playing time of the track appear in the display while playing a disc. You can use the display to check a variety of information about the disc.
1
3m 29s ¤
áP p =+ Current track number Elapsed playing time 1/u DISPLAY Checking the remaining playing time Each time you press DISPLAY while playing a disc, the 1/u display changes as shown below. 123 DISPLAY 45 6 SCROLL Current
Résumé du contenu de la page N° 9
Playing CDs Playing CDs • While playing a disc Checking the information on CD TEXT discs CD TEXT discs contain information such as disc titles and artist names. This information is recorded in Current track number and playing time of empty spaces that are normally unused on the track conventional CDs. The CD TEXT information of the 1
3m 29s disc appears in the display so that you can check the current disc tittle, artist name and track tittle. When Press the player detects CD TEXT discs, “C
Résumé du contenu de la page N° 10
Playing CDs Checking the information on CD TEXT discs Other display information in other languages Z When the player is selected as the audio source by other Sony component featuring the PING function If the player detects a CD TEXT disc with multi- connected through the i.LINK connecting cable, language capability, “CD-TEXT” and “MULTI” appear “( ( 9 9” appears in the display of the player. in the display. This type of CD allows you to change Note that this indication does not appear when t
Résumé du contenu de la page N° 11
Playing CDs Playing CDs z To specify a track numbered over 10 Z Press >10 first, then the corresponding numeric buttons. Locating a Specific Track or a To enter “0,” press 10/0. Particular Point in a Track Example: To enter track number 30 Press >10 first, then 3 and 10/0. Using the AMS (Automatic Music Sensor) buttons or the numeric buttons on the remote, you can quickly Note locate any point in a track or any track on the disc If you reach the end of the disc while pressing ) on the while pla
Résumé du contenu de la page N° 12
Playing CDs Repeating a Specific Portion Playing Tracks Repeatedly Z (A÷B Repeat) You can play a specific portion in a track repeatedly. You can play tracks repeatedly in any play mode. This might be useful when you want to memorize lyrics. 1/u REPEAT Note that you cannot repeat a portion that extends over A÷B CLEAR 123 two tracks. 45 6 1 While playing a disc, press A÷B at the starting point of the portion you want to play repeatedly 78 9 (point A). >10 10 /0 “A-” of “REPEAT A-” flashes in the d
Résumé du contenu de la page N° 13
Playing CDs Playing CDs Playing in Random Order Creating Your Own Programme (Shuffle Play) Z (Programme Play) Z You can use this function to “shuffle” tracks and play You can make a programme that plays up to 25 them in a random order. selected tracks in the order that you want. 1/u 1/u PLAY MODE PLAY MODE 123 123 45 6 45 6 Numeric 78 9 78 9 buttons >10 10 >10 >10 10 /0 /0 (P p (P p ( ( =+ 0 ) =+ 0 ) =/+ CLEAR 1 Press PLAY MODE repeatedly until “SHUFFLE” 1 Before you start playing, press PLAY MO
Résumé du contenu de la page N° 14
Playing CDs z The programme remains in memory until you erase it (see below) or press ¤ The programme is not affected by the ending of the programme or by the selection of another play mode. Notes • “- -m - -s” appears in the display if the total playing time exceeds 100 minutes. • “Step Full” appears in the display when you try to add a track to a programme which already contains 25 tracks. • The play mode cannot be changed while playing a disc even if you press the PLAY MODE button. Changing
Résumé du contenu de la page N° 15
Other Functions Other Functions z If you do any operation while the display window is turned off Adjusting the Brightness of The display turns back on (dimly) for several seconds, the Display Z and then turns off again. You can select one of four brightness levels for the z If you make menu settings while the display window display window. The operation buttons on the player is turned off (¤, áP, and p) turn off when “Dimmer3” or The display turns back on (dimly) during the menu “Dimmer4” is se
Résumé du contenu de la page N° 16
Other Functions Setting the Player to Turn Off About i.LINK Automatically This section explains the general specifications and major features of i.LINK. Read this section before (Power Save Function) Z doing any i.LINK-related operation. When the Power Save function is on, the player will Note that i.LINK connections and operations may vary, automatically turn off (change to STANDBY) after depending on the component. For details regarding several minutes of inactivity. the connection of i.LINK
Résumé du contenu de la page N° 17
Other Functions Loop-connetion i.LINK connections A signal output from one component is transmitted to The use of i.LINK cables to connect i.LINK components all other components. A loop connection should thus as shown below is called a “daisy chain” configuration. be avoided to prevent the return of a signal to its i.LINK component source. i.LINK connecting cable Correct Incorrect (looped) Data can be transmitted between any two components even if they are indirectly connected. Branch connectio
Résumé du contenu de la page N° 18
Other Functions Establishing a LINC Before an audio signal can be transmitted between i.LINK components, a “LINC” must first be established between the receiving component (of the audio signal) and the sending component. Establishing a “LINC” means establishing a logical path for the transmission of digital audio signals between the two components. Each logical path has an ID number. Since the component that sends an audio signal must output the signal to a path, and the component that receive
Résumé du contenu de la page N° 19
Additional Information Additional Information Notes on CDs Troubleshooting If you experience any of the following difficulties while On handling CDs using the player, use this troubleshooting guide to help • To keep the disc clean, handle the disc by its edge. Do not you remedy the problem. Should any problem persist, touch the surface. consult your nearest Sony dealer. • Do not stick paper or tape on the disc. There’s no sound. / Check that the player is connected securely. / Make sure you op
Résumé du contenu de la page N° 20
Additional Information Specifications Display Messages The following table explains the various messages that Compact disc player appear in the display. Laser Semiconductor laser (λ = 800 nm) Emission duration: continuous Message Error code(s) Cause and/or remedy Inputs/Outputs (i.LINK S200) CANNOT C78:11/C78:12 The player cannot establish LINC a LINC with a component i.LINK connector 4 pins - 4 pins (S200) because of an existing LINC between the player and another component. Cancel General the
