Instruction d'utilisation Aprilaire 8056

Résumé du contenu de la page N° 1

Wireless Outdoor Temperature
and Humidity Sensor Accessory
Model 8056
Wireless Outdoor Temperature
and Humidity Sensor Accessory for the
™
Model 8910 Home Comfort Control
Installation and
Operator’s Manual
READ AND SAVE THESE INSTRUCTIONS

Résumé du contenu de la page N° 2

TAblE Of CONTENTS INSTAll bATTERIES INTO WIRElESS OUTDOOR SENSOR Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications.............................. 10 1. Remove the cover of Wireless Outdoor fIGURE 1 Install Batteries into Wireless Outdoor Sensor .... 3 Error Codes................................ 10 Sensor to access battery compartment. See figure 1. Installation of Wireless Module into Limited Warranty ........................... 11 8910

Résumé du contenu de la page N° 3

fIGURE 3 INSTAllATION Of WIRElESS MODUlE INTO 8910 EQUIpMENT CONTROl MODUlE 1. Disconnect power to 8910 fIGURE 2 VIEW THRU WINDOW Equipment Control Module. TO ALIGN PINS 2. Remove cover from 8910 Equipment Control Module. 3. Remove and discard 8910 Equipment Control Module wireless slot cover . See figure 2. 4. Insert Wireless Module into 8910 Equipment Control Module. See figure 3. 5. Replace cover on 8910 Equipment Control Module. 6. Reconnect power to the 8

Résumé du contenu de la page N° 4

fIGURE 5 HOW TO lINk WIRElESS OUTDOOR SENSOR 1. Remove the cover of Wireless Outdoor Sensor and fIGURE 4 8910 Equipment Control Module. 2. Press and hold the link button on the Wireless Outdoor Sensor for 3 seconds, the green LED will begin to flash slowly. See figure 4. The Sensor is now in linking mode and will wait 5 minutes for a linking signal. 3. Now press and hold the link button on the 8910 Equipment Control Module for 3 seconds (see fig

Résumé du contenu de la page N° 5

fIGURE 6 fIGURE 7 HOW TO MOUNT THE WIRElESS OUTDOOR SENSOR 1. Select a mounting location, 3. Mount bracket with the appropriate type of screws (not supplied). • Within 100 feet of the 8910 Equipment Control Module. (Range varies with building material types.) See figure 6. • A way from large metal obstructions that could reduce wireless communication range. 4. Insert sensor onto bracket and slide • A way from direct rainfall (

Résumé du contenu de la page N° 6

SpECIfICATIONS fIVE YEAR lIMITED WARRANTY ® Y our Research Products Corporation Aprilaire Wireless Outdoor T emperature and Humidity Sensor is expressly warranted for five (5) years from Communications Wireless 900 MHz date of installation to be free from defects in materials or workmanship. Wireless range Up to 100 feet Research Products Corporation’ s exclusive obligation under this warranty shall be to supply , without charge, a replacement f

Résumé du contenu de la page N° 7

fCC DEClARATION IC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for Operation is subject to the following compliance could void the user’ s authority to operate the equipment. two conditions: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause (1) this device may not cause harmful int