Résumé du contenu de la page N° 1
Sun™ Small Programmable Object Technology (Sun SPOT)
Developers’ Guide
This version of the Guide refers to V2.0
(updated 16-April-2007)
Copyright 2005-2007 Sun Microsystems, Inc. All Rights Reserved.
Résumé du contenu de la page N° 2
Copyright © 2007 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Sun Microsystems, Inc. has intellectual property rights relating to technology embodied in the product that is described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the U.S. patents listed at http://www.sun.com/patents and one or more additional patents or pending patent applications in the U.S. an
Résumé du contenu de la page N° 3
Contents Introduction .................................................................................................................................... 5 Building and deploying Sun SPOT applications .............................................................................. 6 Deploying and running a sample application................................................................................................ 6 Deploying a pre-existing jar............................................
Résumé du contenu de la page N° 4
Writing a device driver............................................................................................................................................ 40 http protocol support ................................................................................................................................... 41 Configuring the http protocol.................................................................................................................................. 41 Socket Pro
Résumé du contenu de la page N° 5
Introduction The purpose of this guide is to aid developers of applications for Sun SPOTs. The guide is divided into two sections. Building and deploying Sun SPOT applications provides information about how to build, deploy and execute Sun SPOT applications. The topics covered include: • Building and deploying simple applications • Deploying applications you’ve received as jars from other developers • Including properties and external resources through the manifest • Setting up a bas
Résumé du contenu de la page N° 6
Building and deploying Sun SPOT applications Deploying and running a sample application The normal process for creating and running an application (assuming you are working from the command line rather than an IDE) is: • Create a directory to hold your application. • Write your Java code. • Use the supplied ant script to compile the Java and bind the resulting class files into a deployable unit. • Use the ant script to deploy and run your application. In this section we will describ
Résumé du contenu de la page N° 7
[delete] Deleting directory C:\MyApplication\build [delete] Deleting directory C:\MyApplication\suite [delete] Deleting directory C:\MyApplication\j2meclasses -post-clean: clean: -pre-compile: -do-compile: [mkdir] Created dir: C:\MyApplication\build [javac] Compiling 1 source file to C:\MyApplication\build -post-compile: compile: -pre-preverify: -make-preverify-directory: [mkdir] Created dir: C:\MyApplication\j2meclasses -unjar-utility-jars:
Résumé du contenu de la page N° 8
-post-init: init: -override-warning-find-spots: -main-find-spots: [echo] Using Sun SPOT device on port COM45 -do-find-spots: slots: -run-spotclient-with-optional-remoteId: -run-spotclient-with-script-contents: -run-spotclient: [java] Waiting for target to synchronise... [java] (please reset SPOT if you don't get a prompt) [java] [waiting for reset] [java] Sun SPOT bootloader (1514-20060824) [java] SPOT serial number = 0014.4F01.0000
Résumé du contenu de la page N° 9
or ant –Dport=COM2 info The difference between these two commands is that the “spotport” version will check that there is a Sun SPOT connected to the specified port, whereas the “port” version will attempt to connect to a Sun SPOT on the specified port regardless. You should normally use the “spotport” version. If you prefer, you may specify the port in the build.properties file of the application: spotport=COM2 or port=COM2 On Unix-based systems, including Mac OS X, if you
Résumé du contenu de la page N° 10
[exec] [Adding property key: MIDlet-Vendor value: Sun Microsystems Inc] [exec] [Adding property key: MIDlet-1 value: Spottests,, squawk.application.Startup] [exec] [Adding property key: MIDlet-2 value: TestMIDlet label,, com.sun.spot.TestIMlet] [exec] [Adding property key: MicroEdition-Profile value: IMP-1.0] [exec] [Adding property key: MicroEdition-Configuration value: CLDC-1.1] [exec] [Including resource: res1.txt] [exec] Created suite and wrote it i
Résumé du contenu de la page N° 11
-do-init: -post-init: init: environment: [java] To configure the environment for Squawk, try the following command: [java] set JVMDLL=C:\jdk1.5.0_06\jre\bin\client\jvm.dll BUILD SUCCESSFUL Total time: 0 seconds C:\MyApplication> 6. Run the application. To run the application, use the “ant run” command. C:\MyApplication>ant run Buildfile: build.xml -pre-init: -init-user: -init-system: -do-init: -post-init: init: -override-warning-
Résumé du contenu de la page N° 12
[java] -------------------------------------------------------------------- [java] Hits - Class:95.74% Monitor:92.38% Exit:100.00% New:98.43% [java] GCs: 2 full, 0 partial [java] ** VM stopped: exit code = 0 ** [java] Exiting [delete] Deleting: C:\SunSPOT\dev\temp\spot-temp-674916937 -post-run: run: BUILD SUCCESSFUL Total time: 10 seconds C:\MyApplication> As you can see, this application just prints “Hello world!” However, it gives y
Résumé du contenu de la page N° 13
Excluding files from the compilation To exclude files or folders matching a specific pattern from the java compilation, set the ant property spot.javac.exclude.src, either on the command line with –D or in the build.properties file of the project. The value of the property should be specified using standard ant wildcarding. For example, to exclude all source files in all “unittests” folders, use: spot.javac.exclude.src=**/unittests/* Manifest and resources The file MANIFEST.MF in the
Résumé du contenu de la page N° 14
resources/META-INF/MANIFEST.MF extension a within its root folder. The adderlib has such file, whose content is FavouriteSnake: Viper This defines a property whose value will be available to all applications in a similar fashion to application-specific manifest properties. The addertest application demonstrates this by displaying the value of this property. The library suite is built to contain all the properties defined by the manifests of all its input jars. For more details on
Résumé du contenu de la page N° 15
Sun SPOT Sun SPOT Host (“base station”) (“Target”) USB 802.15.4 radio The Host can be any of the supported platforms (e.g. Windows PC, Mac). The Host application is a J2SE program. The Target application is a Squawk Java program. In the SPOT SDK and documentation the 64-bit addresses that identify SPOTs are expressed as sixteen hexadecimal digits subdivided into four groups that are separated by dots for readability. The Basestation may run in either dedicated or shared mode. In dedica
Résumé du contenu de la page N° 16
Base Station configuration It is possible to select a channel and pan id for the base station using command line properties in conjunction with ant host-run. The properties are: -Dremote.channel=nn -Dremote.pan.id=nn Alternatively, if you are operating in dedicated mode, the IRadioPolicyManager interface provides operations to adjust the output power of the radio, the PAN Id and the channel number. To access the policy manager from your host program do: Spot.getInstance().getRadioP
Résumé du contenu de la page N° 17
To configure the SPOT so that this thread is started each time the SPOT starts issue this command via a USB connection: ant enableota The SPOT remembers this setting in its configuration area in flash memory. To configure the SPOT so that the OTA Command Server is not started each time the SPOT starts issue this command: ant disableota Although the OTA Command Server thread runs at maximum Thread priority, parts of the radio stack run at normal priority. This means that if an
Résumé du contenu de la page N° 18
remote.pan.id either on the command line or in the .sunspot.properties file in your user root folder. Using short names for SPOTs As a shortcut, it is possible to use short names for SPOTs instead of the full 16-digit IEEE address. To do this create a file called “spot.names” in your user home directory. The file should contain entries of the form: = for example my-spot-1=0014.4F01.0000.0006 Note that these short names are used for all connections open
Résumé du contenu de la page N° 19
Even if you aren’t concerned about security, you need to be aware of this if you want to be able to use Sun SPOTs interchangeably amongst two or more SDK installations. See the section Sharing Sun SPOTs. Changing the owner of a Sun SPOT Once set, only the owner can change the public key remotely, although anyone who has physical access to the Sun SPOT can also change the public key. If user B wishes to use a Sun SPOT device previously owned by user A, they can become the new owner in one
Résumé du contenu de la page N° 20
ant deploy for each Sun SPOT. What is protected? Applications and customized libraries are always verified and unless the digital signature can be successfully verified using the trusted public key, the application will not be executed. Extra security is provided for over-the-air deployment. In this case, all updates to the configuration page are verified before the page is updated. This prevents a number of possible attacks, for example a change to the trusted public key, or a denial o
