Résumé du contenu de la page N° 1
Portable System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A.
REQUIRED TOOLS AND
MATERIALS:
WARNING!
• (2 each) Wrenches and/or
Socket Wrenches and
READ AND UNDERSTAND
Sockets.
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
1/2" 3/4"
FAILURE TO FOLLOW
AND/OR
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
1/2" 3/4"
Manufactured & Distributed By:
Model #
A Company
Toll-Free Customer Service Number for U.S.: 1-80
Résumé du contenu de la page N° 2
NOTICE TO ASSEMBLERS ALL Huffy Sports basketball Systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand or water according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system. SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for
Résumé du contenu de la page N° 3
PARTS LIST ItemQty.Part No. Description 1 1 206646 Tank (Black) 2 1 200628 Wheel Axle 3 2 226401 Wheel 4 1 900060 Top Pole Section 5 1 908057 Middle Pole Section with Label 6 1 900254 Bottom Pole Section Assembly 7 1 203041 Nut, Hex Flange, 3/8-16 8 1 Net 9 1 201342 Wheel Bracket 10 2 201651 Spacer, Wheel Axle 11 1 200929 T-Strap 12 1 206219 Cap 13 1 266001 Bolt, Carriage, 3/8-16 x 1.5 Long 14 1 203617 Tank Cap 15 1 200439 Label, Moving System and Height Adjust. 16 2 203084 Bolt, Carriage, 5/16
Résumé du contenu de la page N° 4
WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. DO NOT HANG on the rim or any part of the system including backboard, support braces or net. During play, especially when performing dunk type activities, keep player's face away from the backboard, rim and net. Serious injury could occur if teeth/face come in contact with backboard, rim or net.
Résumé du contenu de la page N° 5
PARTS IDENTIFIER- Hardware is actual size 32. Bolt, Hex Flange, 5/16-18 x 2"-Qty (4) 13. Bolt, Carriage, 3/8-16 x 1.5 Long-Qty (1) 22. Washer, .406 I.D. x 1.0 O.D.-Qty (3) 25. Nut, Hex Flange, 5/16-18-Qty (4) 16. Bolt, Carriage, 5/16-18 x 1.75 Long-Qty (2) 7. Nut, Hex Flange, 3/8-16-Qty (1) 23. Bolt, Carriage, 5/16-18 x 3.5 Long-Qty (2) 10. Spacer, Wheel Axle-Qty (2) 31. Washer, 5/8 I.D. x 1/2 O.D.-Qty (1) 30. Special Nut-.-Qty (1) 27. "T" Bolt-Qty(1) PARTS IDENTIFIER- Not actual size 9. Wheel B
Résumé du contenu de la page N° 6
Get to know the basic parts of your basketball system..... FRONT BACK BACKBOARD RIM ELEVATOR ASSEMBLY TOP POLE MIDDLE POLE STRUTS BOTTOM POLE BASE WHEEL CARRIAGE ASSEMBLY Toll-Free Customer Service Number for U.S. : 1-800-558-5234 6 P/N 21273401 07/28/04 http://www.huffysports.com
Résumé du contenu de la page N° 7
Correctly identify each pole section. Poles have an identification 1. sticker that will be used as a reference point in the next step. Reference Stickers 4 5 6 TOP MIDDLE BOTTOM Toll-Free Customer Service Number for U.S. : 1-800-558-5234 7 07/28/04 P/N 21273401 http://www.huffysports.com
Résumé du contenu de la page N° 8
IMPORTANT! ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART Align poles using alignment marks. First, pound top and middle poles together by bouncing them on a scrap piece of alignment mark 2. wood on the ground as shown in FIG B. until they no longer move toward pole identification stickers. THEN add bottom pole section and pound together in the same way. TOP CAUTION! THE IDENTIFICATION STICKER IS 4 LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POL
Résumé du contenu de la page N° 9
Install wheel axle (2) through wheel bracket (9) and install wheels (3) onto wheel axle (2) with spacers (10) as shown. 3. IMPORTANT!: 9 2 3 10 THE SPACER (10) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE. Attach wheel carriage assembly to base (1) with bolt (13), washer (22), and nut (7) as shown. FINGER TIGHTEN - NO TOOLS REQUIRED. Assembly 4. will be fully tightened in next step. 7 IMPORTANT!: 22 BE SURE THAT THE SQUARE PORTION OF THE CARRIAGE BOLT IS 1 PROPERLY SEATED IN THE
Résumé du contenu de la page N° 10
Attach pole assembly to tank assembly as shown. Secure pole assembly to tank and wheel bracket by turning the pole assembly clockwise as shown. 5. Tighten pole completely and further rotate pole until struts are aligned correctly as shown in FIG B. WARNING! TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. IMPORTANT!: The pole should be turned approximately 7 complete rotations to tighten properly. When properly tightene
Résumé du contenu de la page N° 11
Rotate struts down and bend struts outward to line up with holes on base as shown. Secure free ends of tank struts to tank with carriage bolt (16), washer (22), 6. and knob (17) as shown. Repeat for other side. WARNING! KNOBS MUST BE TIGHTENED COMPLETELY AND CHECKED PERIODICALLY FOR TIGHTNESS. 16 22 17 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 11 07/28/04 P/N 21273401 http://www.huffysports.com
Résumé du contenu de la page N° 12
Mount brackets (20 & 26) to backboard and finger tighten as shown. NOTE: Final adjustments will be made in Step 10. 7. 26 32 25 24 20 Toll-Free Customer Service Number for U.S. : 1-800-558-5234 12 P/N 21273401 07/28/04 http://www.huffysports.com
Résumé du contenu de la page N° 13
Install Slam Jam Rim to Backboard A Fit rim (18) securely into bracket (26) as shown (Allow "T"-bolt (27) to slip through 8. center hole in rim (18). B Install reinforcement bracket (28) onto “T” bolt (27) as shown. C Install spring (29) onto “T” bolt (27) as shown. D Install special nut (30) and washer (31) onto “T” bolt (27). E Tighten nut (30) until flush with end of “T” bolt (27). B A 28 18 27 27 26 31 30 C D 29 27 31 27 E 30 Toll-Free Customer Service Number for U.S. : 1-800-5
Résumé du contenu de la page N° 14
Support pole and tank assembly over support table. Carefully slide backboard components 9. onto pole. WARNING! TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. WARNING! DO NOT LEAVE ASSEMBLY UNATTENDED WHEN EMPTY; IT MAY TIP SAWHORSE OR SUPPORT TABLE OVER. While still in the horizontal position, carefully slide backboard components onto pole. Secure hardware at desired position as shown and tighten all hardware comple
Résumé du contenu de la page N° 15
Place assembled unit in desired location. Fill tank with water (26 gallons/98.4 liters) or sand (approx. 360 lb./163 kg) and snap tank cap (14) in place. Insert T-strap (11) through slot on back of base as shown. Secure unit to ground by 11. twisting tie down stake (21) into ground and hooking T-strap (11) onto tie down stake (21). CAUTION! ADD TWO GALLONS (7.6 LITERS) OF NON-TOXIC ANTIFREEZE IN SUB- FREEZING CLIMATES. 11 21 11 14 21 11 Toll-Free Customer Service Number for U.S. : 1-800-558-5
Résumé du contenu de la page N° 16
Attach net clips to rim as shown. 12. WARNING! CLIP “ARM” USE OF THIS PRODUCT 19 WITHOUT PROPER INSTALLATION OF SMART ® CLIPS , OR WHEN ALL SMART ® CLIPS ARE NOT PRESENT COULD RESULT IN BODILY HARM. BE SURE TO FOLLOW DIRECTIONS CAREFULLY. CLIP “BODY” Insert one “arm” of clip into ram as shown. Twist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. 19 Push in direction indicated by arrows. A A Push second “arm” back and into ram as shown. B B Twist “bo
Résumé du contenu de la page N° 17
Install net. 13. SIDE VIEW NETCLIP NET Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position. Net must be centered through clip. NETCLIP NET Toll-Free Customer Service Number for U.S. : 1-800-558-5234 17 07/28/04 P/N 21273401 http://www.huffysports.com
Résumé du contenu de la page N° 18
Attach height and moving label (15) to front of pole as shown. Regulation rim 14. height is 10 feet. HEIGHT ADJUSTMENT Rest unit on support table. Remove adjustment knobs (A) and carriage bolts (B) to extend or retract backboard and rim. Height adjustment from 7 1/2’ to 10’. A CAUTION! WARNING Backboard may rotate during height adjustment. B WARNING Do not adjust height of system HEIGHT AND MOVING LABEL in upright position. System must be in down position to adjust MOVING SYSTEM MUST NOT O
Résumé du contenu de la page N° 19
ESPAÑOL Sistema portátil Manual del propietario Centro de Servicio al Cliente o N53 W24700 South Corporate Circle o Sussex, WI 53089 o EE.UU. HERRAMIENTAS Y MATERIALES REQUERIDOS: ¡Advertencia! (2 de cada una) llaves de tuercas y/o llaves de tuercas de boca LEA Y ENTIENDA EL MANUAL tubular y casquillos (se DEL OPERADOR ANTES DE recomiendan casquillos USAR ESTA UNIDAD. profundos). SI NO SE SIGUEN LAS INSTRUCCIONES DE 1/2" 3/4" OPERACIÓN SE PODRÍA OCASIONAR UNA LESIÓN O Y/O DAÑOS A LA PROPIEDAD
Résumé du contenu de la page N° 20
AVISO PARA LAS PERSONAS QUE REALIZAN EL MONTAJE TODOS los sistemas de baloncesto de Huffy Sports, inclusive los usados para EXHIBICIÓN, DEBEN estar montados y equilibrados con arena o agua, de acuerdo con las instrucciones. Si se ignoran estas instrucciones se podría ocasionar una LESIÓN GRAVE. NO es aceptable improvisar un sistema de pesas provisional. ¡IMPORTANTE! Saque todo el contenido de las cajas. Asegúrese de revisar el interior de las secciones del poste. Ahí se han empacado herraje y p
