Instruction d'utilisation Crimestopper Security Products RS800 Series II

Résumé du contenu de la page N° 1

R emote ngine tarting
OPERATING INSTRUCTIONS

Inc. This booklet contai ns the information necessary for using & maintain ing your remote start system. If any
-



equipment. This system is designed to be professionally installed onto a vehicle in which all items, such as parking brake and all
associated components, door swit ches, transmission shift linkage, throttle linkage, and all engine safety features, are in perfect


DO NOT install this Remote Engine Start

Résumé du contenu de la page N° 2

NOTE: When using the optional Starter Disable feature without power door locks, be certain to #1 #2 install the supplied L.E.D. which LOCK/ will be your indication that REMOTE the Starter Disable is active. You UNLOCK the transmitter if the L.E.D. is CRIM ESTOPPER flashing or the vehicle will not start. - . SOLID 6 THEN SOLID SEC. STARTER START IGN AFTER FLASH 1X turned off with remote transmitter or for RS801 model, activating the Green Start input wi

Résumé du contenu de la page N° 3

- In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then nd rd nd rd . If Third attempt fails to start engine, the system will turn off and doors will remain locked. NO FURTHER ATTEMPTS WILL BE MADE AUTOMATICALLY . - lock/re - ) Press the Lock/Unlock button on the transmitter as you leave or come near the vehicle. Doors lock automatically when vehicle is Remote Started. Starter Disable/Anti -

Résumé du contenu de la page N° 4

r s - NOTE: TRANSMITTER PROGRAMMING: . nd rd 2 th CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063 otherwise turn key off and close hood. the unit will automatically exit code learning mode, code. If all 4 codes are learned, code and 4 flashes for the 4 code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3 . You should get 2 light flashes indicat