Résumé du contenu de la page N° 1
ADVANCED
ELEMENTS
TM
StraitEdge
I N F L A T A B L E K A Y A K
1 Person Inflatable Kayak
Owner's Manual
MODEL AE1006
IMPORTANT!
BEFORE PROCEEDING
READ THIS MANUAL CAREFULLY
Save these instructions for future reference
ADVANCED ELEMENTS, INC. 2005
Résumé du contenu de la page N° 2
OWNER'S INFORMATION PACKET TM StraitEdge I N F L A T A B L E K A Y A K 1 Person Inflatable Kayak Owner's Manual MODEL AE1006 CONTENTS 1. CAUTION - SAFETY WARNING 2. ASSEMBLY / INFLATING INSTRUCTIONS 3. GUIDELINES FOR USAGE 4. PROPER CARE AND STORAGE 5. REPAIRS 6. FREQUENTLY ASKED QUESTIONS (FAQ) For additional info please call us or visit our website at: www.advancedelements.com Send us an email at: info@advancedelements.com
Résumé du contenu de la page N° 3
1. CAUTION - SAFETY WARNING Users of this product agree by their use to accept the inherent risks involved in this paddlesports activity and agree to follow all instructions, cautions, and warnings carefully before using this Kayak. (PLEASE READ CAUTION STATEMENT CAREFULLY) C A U T I O N SAFETY WARNING PADDLESPORTS CAN BE VERY DANGEROUS AND PHYSICALLY DEMANDING. THE USER OF THIS PRODUCTSHOULD UNDERSTAND THAT PARTICIPATION IN PADDLESPORTS MAY INVOLVE SERIOUS INJURY ORDEATH. OBSERVE THE FOLL
Résumé du contenu de la page N° 4
2. Assembly / Inflating Instructions The illustration below shows the general assembly of the kayak, with optional thigh straps (sold separately).. Your kayak comes from the factory pre-assembled. The only assembly you should need to do is attach the adjustable seat. The StraitEdge Kayak has a rigid frame in the bow and stern that enhances its performance. Assembly Instructions 1. Insert aluminum Bow rib and the Stern rib into the webbing slots on the StraitedgE air bags and web
Résumé du contenu de la page N° 5
To begin inflating your kayak, you will need a Bellows Foot Pump (FAQ) or a Double Action Hand Pump (FAQ) and your Valve Adaptor (FAQ). The Valve Adaptor can be located in the seat pocket with the repair kit. Never use compressors, CO2 or compressed air as they may damage you kayak. Diagram of kayak valves 1 6 5 3 2 4 Inflating Instructions Important: Before inflating, check to be sure that the kayak is completely assembled. Inflate your kayak in the following order. Failure to follow thes
Résumé du contenu de la page N° 6
3. Locate chambers 3 and 4 “floor.” Make sure valve body is screwed in tightly. Remove small cap (fig. 3) and insert Floor Valve Adaptor (fig. 4). Inflate chambers until firm(1.0 PSI). Do not over inflate (FAQ). TETHER RING CHECK fig. 3 VALVE CHECK VALVE CAP BODY SMALL CAP INSERT “BOSTON PUMP ADAPTOR” SMALL CAP ADVANCED ELEMENTS, INC. (FLOOR) fig. 4 PUMP ADAPTORS (PUMP HOSE) (BOSTON) 4. Locate Chambers 5 and 6. Inflate Chambers 5 and 6 until firm (1.0 PSI). 5. Make sure all valves are cl
Résumé du contenu de la page N° 7
To use as self-bailing: The StraitEdge can be used as both a self-bailing and non self-bailing kayak. Most self- bailing inflatable kayaks are designed for paddling white water only. They typically have quite a bit of rocker to allow quick turning and other maneuvers. By opening the drain ports you will allow water or waves that spills into the kayak to drain out through the bottom. In calm conditions or on cold days you may wish to close the drain ports to prevent water from entering the
Résumé du contenu de la page N° 8
Your kayak is designed to be paddled with a double bladed kayak paddle. Paddle with short and even strokes. Keep the blade close to the kayak and the paddle almost vertical. Pull with your lower hand and push with your upper hand. To reduce the amount of swaying at the front of the kayak, ease off on the force of your stroke. Paddling with a backward stroke can sometimes offer quick maneuverability. Always practice safety and take the time to learn about the area where you are paddling.
Résumé du contenu de la page N° 9
Folding instructions to store your kayak: 1. Completely deflate all air chambers (FAQ) and thoroughly dry kayak and remove the seat. 2. Fold in half, down the center, lengthwise. 3. Fold into 3 equal sections. 4. Place into duffel bag. 5. Repairs / Design and Material All kayaks come with a repair kit that includes glue and several patches. This should remain with the kayak in the event that you may need it. If service is required for your kayak, please call 866-262-9076 for assistance. To r
Résumé du contenu de la page N° 10
To repair pinholes: 1.Inflate the PVC tube. Locate the pinhole by sponging soapy water over the tube until you see air bubbles. Mark the location of the pinhole. 2. Deflate the tube and dry the affected area. Apply a drop of glue to the pinhole 3. Allow glue to dry completely. 4. Do not inflate the kayak for at least twelve hours. 6. Frequently Asked Questions Below is a list of commonly asked questions about the Advanced Frame Inflatable Kayak. Please contact us if you have other ques
Résumé du contenu de la page N° 11
LIMITED WARRANTY Advanced Elements, Inc. warrants this product to be free from defects in material or workmanship for a period of one year from the date of purchase. Products that prove to be defective under conditions of normal and proper use during the warranty period because of defective workmanship or faulty material will be replaced or repaired without charge. For warranty service, contact Advanced Elements, Inc. Advanced Elements, Inc shall inspect all warranty claims and in the event
Résumé du contenu de la page N° 12
IMPORTANT! BEFORE PROCEEDING READ THIS MANUAL CAREFULLY Save these instructions for future reference If you would like a catalog of our latest products please visit our website at www.advancedelements.com or call Toll Free 866-262-9076 WARRANTY REGISTRATION CARD PLEASE COMPLETE THE OTHER SIDE OF THIS CARD AND RETURN TO: Mail to: Advanced Elements, Inc. P.O. Box 5128, Concord, CA 94524 Attn: warranty department.
