Instruction d'utilisation Haier T60-32

Résumé du contenu de la page N° 1

User's manual
Spin-drier
This manual is for
T60-32
Please read this manual
carefully before using.
Retain it for future reference.

Résumé du contenu de la page N° 2

Contents Names of the parts Safety precautions The musts in using Using sequence Trouble-Shooting *Answers to question Packing list *Specification

Résumé du contenu de la page N° 3

Names of the parts Cover of the spin tub Knob of spin timer Inner cover Panel support Water-filling entrance Control panel Power line Handle Spin tub Drain hose Back cover Cabinet Base frame Fixing leg (four pieces) Note:The figures in this manual can only be regarded as diagrammatic sketches. Please understand that, due to constant improvement of design, the extractor and its accessories that you have purchased may be inconsistent with these figures in the manua

Résumé du contenu de la page N° 4

Safety precautions Please insert the power cord into special When the machine is normally using, please put the power plug at the loc- receptacle with rated voltage.Be sure to ation easily to be inserted and extracted use single-phase two pins receptacle.If by hand. Be sureto pull the plug off when possible,please adopt electric leakage there'spower failure, orthe machine is protector. being moved, cleaned or when it is idle. Earth Do not bend, stretch, twist, bind the power cord by force

Résumé du contenu de la page N° 5

Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Keep the machine away from direct Handicapped or chi

Résumé du contenu de la page N° 6

The musts in using Usage of the panel OFF 5 1 4 2 3 WATER INLET SPIN TIMER Set the spinning duration depend- Water-added rinsing-spinning, ing on the category and amount of to be used during defoaming the articles. -spinning. To set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be less than <10cm 10cm , or

Résumé du contenu de la page N° 7

Using sequence Preparation before spinning Please make the machine stand horizontally. Confirm that the washing machine is earthed reliably . Then insert the power plug I nto the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. Put down the drain hose . Spin process 1 Put the laundyies in properly 2 Put the gland in properly 3 Close the inner and outer coverof the spin tub 4 Do you need water-added Rinsing-spinnning Water-added rinsing-spinning h

Résumé du contenu de la page N° 8

Notes on Spinning Use the foam-removing spin- Please put in the gland properly even if the laundries quantity is small. ning to remove the extra deter- . Do not leave any articles above the depression cover. gent liquid. It can both shorten Push Gland the washing time and save the Push water consumption. The laundries Proper Proper No gland are slanting To protect your laundries In spinning, it will pause the During the spinning, the and washing machine, work if you open the ou

Résumé du contenu de la page N° 9

Trouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason-How to solve Is there power failure--Please use it when there's power supply. The m

Résumé du contenu de la page N° 10

Packing list Name Quantity One piece User's manual One piece Water inlet hose One piece Gland One set Spin-drier Specification Injection pressure(MPa) 0.02 0.2 Rated spinning capacity kg 6.0